anslut 019044 Cube Socket

Specifications

• Rated voltage: 230 V ~ 50 Hz
• Rated current: 16A
• Max load: Not specified
• Size: Not specified
• Cord type: IP44
• Cord length: 1.4 m
• Protection rating: IP44

IMPORTANT

• Store out of the reach of children.
• Check that the nominal data of the appliance corresponds to the technical data below.
• If the nominal data (voltage, power consumption, temperature, frequency, etc.) of the connected appliance exceeds the technical data below, there is a risk of material damage.

SYMBOLS

TECHNICAL DATA

• Rated voltage 230 V ~ 50 Hz
• Rated current 16A
• Max load 3680 W
• Size 109 x 109 x 97 mm
• Cord type H07RN-F 3G1.5 mm²
• Cord length 1.4 m
• Protection rating IP44

DESCRIPTION

Earthed 4-way cube socket with caps and manual power switch, approved for outdoor use. With h hook, a magnet, and a screw coupling for a ground spike or tripod stand to enable multifunctional use.

1. Power switch
2. Socket
3. Hook
4. Magnet
   FIG. 1

USE

1. Check that the appliance to be connected is switched off before plugging it in.
2. Plug the appliance into a socket and plug the cube into a suitable PowerPoint

FAQs

Q: Can I use the cube socket indoors?
A: The cube socket is approved for outdoor use, but you can also use it indoors as long as it meets your electrical requirements.

Q: What should I do if the cube socket gets wet?
A: Disconnect the cube socket from the power source immediately and allow it to dry completely before using it again to avoid any electrical hazards.

Q: Can I connect multiple high-power devices to the cube socket?
A: It is recommended not to exceed the specified maximum load capacity to prevent overheating and potential damage to the devices or the cube socket itself.

Documents / Resources

anslut 019044 Cube Socket [pdf] Instruction Manual 019044 Cube Socket, 019044, Cube Socket, Socket

References

• User Manual