ANJIELO SMART 4-Wire Digital Analog Hybrid System User Guide

Follow the app’s instructions to add the camera to your smart
home system.
Configure settings such as motion detection, alerts, and
recording preferences within the app.

Monitoring:

Access the camera feed through the app on your smartphone or
tablet.
View live footage, playback recorded videos, and manage
settings remotely.

Ensure a stable internet connection for seamless monitoring
experience.

FAQ:

Q: Can I use this camera with other smart home platforms?

A: This camera is designed to work with Tuya Smart and Smart
Life apps for optimal performance. Compatibility with other
platforms may vary.

Q: What is the maximum resolution supported by this
camera?

A: The camera supports a maximum resolution of 2MP for clear and
detailed footage.

Q: How can I troubleshoot connectivity issues with the
camera?

A: Ensure that the camera is connected to a stable power source
and check your internet connection. Restarting the camera and app
may also help resolve connectivity issues.

View Fullscreen

SMART HOME
4-Wire Digital-Analog Hybrid System AHD/TVI/CVI 2MP Resolution Tuya Smart/Smart Life APP
Web:www.anjielo.com

;ó

dùùòý

ýÖýAÖÖý

^ ói

DóùýÖª ~ýóióiùýÖýýòù

/ óóÖÖóýóù

ýó

ýóùùòýÖùù ýùóÖÖiýÖóý

^ýi

Öýùóýó<ª;ò

~ýÖùÖý ;ó
;Öù

dùùòýÖùùÖýÖ©ýÖùÖý ÖiýÖiýùýóióiùýÖùýýó óÖýùÖÖùòýóÖó
)ýÖ;óÖùÖýùýýÖýýÖý

ÖÖÖVý~~

Ö~~

ýóýóýýýóÖÖiÖý ÖùÖýýÖiýùýóióùÖý

ýÖý

~~~ýùýýóóÖ

~ÖòÖói

©ùýýóùÖýýóÖùýýó

dùùòý

Web:www.anjielo.com

~Öói
dùùòý

dù%òý Dù

Aýóýùý

óýÖù òòý

Unlock cable IC card* 5

óýT

ó ù

%óÖòý

óÖòý

DÖÖùÖÖ
ýùùòýÖýùÖÖýýýÖùý ýÖùÖóýÖýýùýùùòýýÖ ùýòÖùùDóÖÖòýÖýùýò

8 AÖÖý

ýý

ýýùòùýýýdýýÖýýÖ ýóÖòýýÖóýÖùùòýòóióóýý

%Öýýó

dù dù

Dù

ýýýóýýÖóý ýÖóýýÖÖýùýùòý
2

Web:www.anjielo.com

dù

Dù

ýóÖòýýýýýÖ ;ýÖóýf ouróý ~ýÖóýýùòýÖùýòóý ;ýÖÖýýÖf ouróý Dýýó%óÖùýù ýóýýýùýóÖòý%%ýù ýóýùÖ© ýÖùÖý AÖýùýÖÖý

5 ýóùùòýÖùù

ýýùùòýÖýÖÖýù ýýýùýóÖòýóýóýù%ýù DýýÖýùùòýýýùùòýóýóýù% ýóùùòýÖùù

Web:www.anjielo.com

6 DùýÖùó

DýóÖ

ýý %ý ^ýiý

ýóù

Ring

Öùò

ùÖóýùý DÖ

ý ý %ýóýD%Öý ùýóýóýùùùòýÖýù D%ýD%ÖýÖýýýsýÖ

%ýóýD% ýý ý

Öùòóói ó VÖÖýýý ) Ö <ýÖ ;ýó Ö DÖÖ ~ ~ýý i ÖùÖ ýý RÖÖýý TýÖ Öòó ©ýÖýý Týýó
òÖói %ý ^ýýýòýÖùýÖýóýýý )Öòýó~ýÖýóýóiýýýùùòýóýóýùDý ùùòýóýóýùýÖýýýÖòýý óýóýùùùòý óiùýÖýýýóýói ýóùùý ÖiýùýýóÖùýýóýýù ùýýóóùýýóýÖòýùùÖòýù ùýýóýýù ùýýóùÖ ýýùýýóýýýóùý ýÖýó ýýÖýÖýÖý ýÖýýýýýÖýÖýÖýý Öùý~V^Öó Öý ýÖý A%ýóýóýÖÖù ùòýýÖýýýóýÖÖýýóÖÖóùýýó ÖýùýóÖòýýùÖ A%A%©D©D©D©D© ýÖýòÖýù
ýýýýýùýýýý
óýýýýý
^ýiýÖòýýýÖýù
ýÖýùóýóýù<ª;óùý)¸ùýÖù~ùý
ýóóýÖýÖýýý ùù%ýóýòý

Web:www.anjielo.com

ùÖóýùý ;Ö%ùi;ÖóýÖýÖùýýÖý DÖ ÖýýýýÖýùÖý%ýÖÖóýD%
óiòÖýýýýóÖòýùùòý

ýùòý

ÖiýÖ

ùýòý Ö ÖÖ
ói Öi

AÖ

©ùý

ÖiýÖiý
óÖýÖÖýýýýóÖòýù ùòýDýùÖÖýiÖýù ýóÖÖýÖýùÖi

ýóóiDýóÖýóÖóÖýù

óiýóùùÖýýóùóÖýÖýýýý Öùýòýýýýýó%ýýýùýýýÖýÖù

ýÖý

ªiùý
^ý ýùýýùýý ;óÖùÖùýýÖýýÖòýù ýýýýýóÖòýù Ö ~~ýóýýýóÖýóýýýÖùýóÖ ÖýýùùùòýýÖýÖýÖý ýÖýýýýýýóÖòýòýýù ýÖýÖýÖý Ö ~~ýóýýý ýªýóÖýýýùùòýýùÖ Öýýý ~~ýóýýýóÖ

Web:www.anjielo.com

7 %Öù
ýÖóÖÖÖý ~~ý<ý~ÖÖóóù ýý óÖýóùýòýùÖù
8 ~~ýý
~ýÖýýýý ~~ýý ýý ~~ýÖýÖùùùýóýÖýóýÖÖÖ ýòóýý ~~ýÖýóóiý AýÖÖýýýÖýÖýýÖÖùÖý ýýÖùùýùýóýòýóýýÖýÖùóÖýý ÖýýýÖýòý ýýýýÖùùýùýóýýýýòýÖùùý ù ýóýÖÖóÖ ýÖùùùòýÖýýòý ÖýóióÖÖýùÖóó ýóÖÖùùÖùÖýýòý ýùýùòýÖùýóýÖýýóýýýùýóý òýýýùýÖÖóóòýýóÖòýòù Ö ýÖóó

Web:www.anjielo.com

ùùÖýù ~~
^ýdýÖóÖóýó~~ÖùýÖýóÖ óiýýýª;Dóýóª;

óiýóª;

ùýóý óýóýù

ýýóýª;Öóýó

D~Öùùý

óýóý<A¸òÖù

ýýýýª;Öù

ýD~ÖùùýÖùýòýùÖýù ªV^

ýóùýóýóýóýù

óùÖ ýóª;D

ýóÖýýÖý<ª;óóýóýùý óiùù%ýóýýýóýý~~

óiùùÖùÖÖòýÖùùýùòýý~~

Web:www.anjielo.com

Výùý
óiýùýóýýýÖý~~ýýýóýýýóÖÖiý ÖiùýóiÖòÖóiýùýó%ÖùÖùýÖò
óiýòýýóý ýýýýýÖóý

óióiÖùÖýÖýóù

ýÖýÖiýÖùùýùóóÖùýýó

ùýÖùùýýùýóùýýùóóÖ

ùýýóùÖòýùòý

ùóÖýóÖùýóý

©ýD~ÖùùýD%ýý

ýýùýóýÖÖ

ýóýýÖ

ùýýýùòý

ùýýóýýÖÖýÖùýÖÖýýù

ýóiýóÖÖóýýóÖùÖùÖýýóÖù

ýùýóýýÖÖÖý~~Öýý
~ýÖýóýóiýóòýóÖý
)ýýòýýòýýÖÖùùýýýÖÖý óói;ýÖýùýóÖói
ýýýùýóýýùýóýòýùÖýùýùýóý ýóùòýýóý)ýýóýÖýý ýóùòýýóýùýýýùÖý ýóÖýýý~óÖÖiÖiýóýÖùùý

Web:www.anjielo.com

11ùýýóÖùóÖ
ýýýýýóÖòóÖý ÖÖ

ýòýýÖùòÖýýùóÖÖ

ÖÖ
ùýýóýù D~%Öùýýóýùýý
°ÖýÖ D~%ýýýòý

óiýùýýóýù ýýýÖÖýÖý
óiý°ÖýÖ ýýýùý

óiýýóýý óýýýý óÖý

Web:www.anjielo.com

12 dù
1. Diagram

Web:www.anjielo.com

2 . Set t ing diagram

Web:www.anjielo.com

3 . Set t ing
3.1. Memory reset Press SET button for 3s and release until long beep heard. Shortly press it for 3 times and 3x long beep heard.
3.2. Master password setup In standby mode enter master password (default master password is 123456) and press # button to enter settings mode. Double long beep sound will be heard. Press 0 and # button to enter into master password setup mode. One long beep sound will be heard. Enter new 6-digit password and press # button. One long beep sound will be heard. Press * button to exit into standby mode. Double short beep sound will be heard.
3.3. Unlock password setting In standby mode enter master password (default master password is 123456) and press # button to enter settings mode. Double long beep sound will be heard. Press 1 and # button to enter into user password setting mode. One long beep sound will be heard. Set 3-digit cell number from 000 to 199, and press # button. One long beep sound will be heard. Set new 6-digit user password and press # button. One long beep sound will be heard if successful added. If current cell is already occupied then double short beep sound will be heard. User can add new passwords for new cell number. Set new 6-digit user passwords after setting new cell number. Press # to confirm. Press * button twice to exit into standby mode. Double short beep sound will be heard.
Example: Add 333333 password into 003 cell number and 444444 password into 004 cell number.123456 # 1 # 003 # 333333 # ** 123456 # 1 # 004 # 444444 # **

3.4. Unlock password deleting In standby mode enter master password (default master password is 123456) and press # button to enter settings mode. Double long beep sound will be heard. Press 2 and # button to enter into user password deleting mode. One long beep sound will be heard. Set 3-digit cell number from 000 to 199, and press # button to delete the password. One long beep sound will be heard. Enter 99 instead of cell number and press # button to delete all user passwords. User can continue deleting passwords by entering their cell numbers and pressing # button after each cell number. Press * button twice to exit into standby mode. Double short beep sound will be heard.
Example: Delete passwords from 003 and 004 cell numbers: 123456 # 2 # 003 # ** 123456 # 2 # 004 # ** delete all passwords: 123456 # 2 # 99 # **

Web:www.anjielo.com

3.5. RFID key setting In standby mode enter master password (default master password is 123456) and press # button to enter settings mode. Double long beep sound will be heard. Press 3 and # button to enter into wireless unlock key setting mode. One long beep sound will be heard. Enter 3-digit cell number from 000 to 199, and press # button. One long beep sound will be heard. Add the keys one by one to recognized area within 20s. One long beep sound will be heard if successful added. If double short beep sound be heard that means the current cell number is already used. User can add extra new keys for new cell number. Set New cell number and press #, add the new keys to recognized area one by one within 20s. Press * button twice to exit into standby mode. Double short beep sound will be heard.
Example: Add RFID key into 003 cell number
123456 # 3 # 003 # Add the RFID keys near recognized area ** Add RFID key into 004 cell number 123456 # 3 # 004 # Add the RFID keys near recognized area**
Tips: Alternative way to add unlock keys : Standby mode press SET button shortly Reader the keys one by one Press SET to exit
3.6. RFID key setting In standby mode enter master password (default master password is 123456) and press # button to enter settings mode. Double long beep sound will be heard. Press 4 and # button to enter into wireless unlock key deleting mode.One long beep sound will be heard. Enter 99 and press # button to delete all RFID keys.
Example: Delete all keys 123456 # 4 # 99 #
3.7. Fingerprint setting In standby mode enter master password (default master password is 123456) and press # button to enter settings mode. Double long beep sound will be heard. Press 5 and # button to enter into fingerprint setting mode. One long beep sound will be heard. Enter 3-digit group number from 000 to 199, and press # button. One long beep sound will be heard. Add the fingerprints one by one to recognized area within 20s. One long beep sound will be heard if successful added. If double short beep sound be heard that means the current group number is already used. Press * button twice to exit into standby mode. Double short beep sound will be heard.
Example: Add fingerprint into 001 group number 123456 # 5 # 001# Add the fingerprint at recognized area**
Tips: Alternative way to add fingerprint : Standby mode press SET button shortly Reader the fingerprints one by one Press SET to exit

Web:www.anjielo.com

3.8. Fingerprint deleting In standby mode enter master password (default master password is 123456) and press # button to enter settings mode. Double long beep sound will be heard. Press 6 and # button to enter into fingerprint deleting mode. One long beep sound will be heard. Enter 99 and press # button to delete all fingerprints.
Example: Delete all fingerprints 123456 # 6 # 99 #
3.9. Keyboard backlight setup In standby mode enter master password (default master password is 123456) and press # button to enter settings mode. Double long beep sound will be heard. Press 7 and # button to enter into keyboard backlight setup mode. One long beep sound will be heard. Modes for options 00# – keyboard backlight disabled all the time 01# – keyboard backlight enabled all the time 02# – keyboard backlight enabled in working mode and disabled in standby mode. Press * button to exit into standby mode. Double short beep sound will be heard.
Example: Enable keyboard backlight only in working mode 123456 # 7 # 02 # *
4 . Product paramet ers

Camera View angle Definition(Hor.) LEDS for night Power consumption Power supplier Operation temp Installation

CCD/CMOS 1/3p (120°) 1/2.7p (148°) CVBS800TVL: AHD720P/960P/1080P IR LEDS(120°) 200mA max.(10V-13V DC) Supplied from indoor unit -40-+50 Surface/Flush mount

NOTE:
1. Match the doorbell video signal same with indoor monitor. e.g : 600TVL~1000TVL doorbell, the monitor set CVBS signal mode 720P doorbell, the monitor set 720P signal mode.1080P doorbell, the monitor set 1080P signal mode.
2. If use the exit button function, the indoor monitor when standby state must have 5V power supply.

Web:www.anjielo.com

5 . Connect t he elect ronic lock æElectromagnetic lock
Electronic lock

Web:www.anjielo.com

Cathode Lock, Anode Lock Connecting the Power Controller

Web:www.anjielo.com

Note:
Electronic locks with 12V or less only. If the voltage of the electronic lock is more than 12V, it needs to be connected here, and the lock should be connected to an external power cable.

13 Common problems
1. Oùùòýiýý (òýý)

If the outdoor doorbell is equipped with a card unlocking function, it is necessary to turn on the “Support access card” function, otherwise the outdoor doorbell will continue to beep continuously, and when it is turned on, it will not make a strange sound.

2 . Ö’ýÖýùòýýý?

If you press the doorbell, the indoor display does not appear in the picture and sound, or after the appearance of the picture but was cut off, you need to check whether the indoor unit is set to “Message Mode” or “Mute Mode”, change to ” Ring Mode” can be.

Web:www.anjielo.com

14 After-sales support

Customer Service Email: sales@anjielo.com

Due to the regular upgrades of systems and products,could not guarantee exact consistency between the actual product and the written information in this manual.

Web:www.anjielo.com

FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Documents / Resources

ANJIELO SMART 4-Wire Digital Analog Hybrid System [pdf] User Guide
4-Wire Digital Analog Hybrid System, Digital Analog Hybrid System, Analog Hybrid System, Hybrid System

References

User Manual

ANJIELO SMART 4-Wire Digital Analog Hybrid System User Guide

4-Wire Digital Analog Hybrid System

Specifications:

Product Usage Instructions:

Installation:

Setup:

Monitoring:

FAQ:

Q: Can I use this camera with other smart home platforms?

Q: What is the maximum resolution supported by this
camera?

Q: How can I troubleshoot connectivity issues with the
camera?

Documents / Resources

References

Leave a comment

Cancel reply