ANALOG-DEVICES-logo

ANALOG DEVICES Precision High Voltage Density Optimized Voltage Drive

ANALOG-DEVICES-Precision-High-Voltage-Density-Optimized-Voltage-Drive-PRODUCT

This document is interactive. You can click on any underlined text to navigate through the document.

For the resources

ANALOG-DEVICES-Precision-High-Voltage-Density-Optimized-Voltage-Drive-fig-1

ANALOG-DEVICES-Precision-High-Voltage-Density-Optimized-Voltage-Drive-fig-2

For the individual pages

ANALOG-DEVICES-Precision-High-Voltage-Density-Optimized-Voltage-Drive-fig-3

Non-isolated; Multichannel
With LT6375A Amplifier
With AD8479 Amplifier

ANALOG-DEVICES-LT3471 -Precision-High-Voltage-High-Common-Mode-Current-Measurement-Performance-Size -Optimized-FIG-1

 

Non-isolated; Multichannel
With LT6375A Amplifier
With AD8479 Amplifier

 

ANALOG-DEVICES-LT3471 -Precision-High-Voltage-High-Common-Mode-Current-Measurement-Performance-Size -Optimized-FIG-2

 

Non-isolated; Multichannel
With LT6375A Amplifier
With AD8479 Amplifier

 

PART # DESCRIPTION
LT3471 Dual 1.3A, 1.2MHz Boost/Inverter in 3mm ×3mm DFN
LT8570 Boost/SEPIC/Inverting DC/DC Converter with 65V Switch, Soft-Start and Sync.
LT8604 High Efficiency 42V/120mA Synchronous Buck
ADP7118 20V, 200mA, Low Noise, CMOS LDO Linear Regulator
ADP7182 –28V, −200mA, Low Noise, Linear Regulator

 

Non-isolated; Multichannel
With LT6375A Amplifier
With AD8479 Amplifier

 

 

PARAMETER

STAGES ADC Amplifier
Part # AD7606C-18 [1] [2] LT6375A AD8479
Pin AVCC VDRIVE V+ / +VS V- / -VS
Supply Voltage V 5 3.3 [1] [2] 15

15

-15

-15

Supply Current mA 50 1.9 [1] [2] 0.6

0.85

-0.6

-0.85

PSRR dB 60 [1] [2] 30 (100kHz)

33 (100kHz)

15 (100kHz)

13 (100kHz)

POWER REQUIREMENTS

Note 1: The supply currents indicated are the maximum quiescent current of the supply rails. For overall full load or short circuit current specifications, refer to the datasheets of the signal chain components.
Note 2: The supply voltages indicated are the values for typical applications.
Note 3: Consult the corresponding datasheets for details on power dissipation if needed.
Note 4: The actual supply current requirement shall be multiplied depending on the number of channels on the signal chain.

©2022 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.

Documents / Resources

ANALOG DEVICES LT3471 Precision High Voltage High Common-Mode Current Measurement Performance-Size Optimized [pdf] Instructions
LT3471 Precision High Voltage High Common-Mode Current Measurement Performance-Size Optimized, LT3471, Precision High Voltage High Common-Mode Current Measurement Performance-Size Optimized
ANALOG DEVICES LT3471 Precision High Voltage High Common-Mode Current Measurement Performance-Size Optimized [pdf] Instructions
LT3471 Precision High Voltage High Common-Mode Current Measurement Performance-Size Optimized, LT3471, Precision High Voltage High Common-Mode Current Measurement Performance-Size Optimized

References

Leave a comment

Your email address will not be published. Required fields are marked *