Amazon Basics Adjustable Boom Height Microphone
Specifications
- Weight
3.31 pounds - Dimensions
24.25 x 21.32 x 85.75 inches - Material Type
Plastic, Steel - Brand
Amazon
An adjustable Bom height microphone stand is used to hold a microphone securely in a place at the height you chose. It is a long boom arm with the molded plastic. It is adjusted to standard height for speech, singing, and speaking. And its design is versatile folds straight mic. Its max height is 85.75 inches and its base is 21 inches. And it is Compatible with 3/8 inches to 5/8 inches adapters. And its max microphone weight is 1kg.
Tripod Mic Stand with Boom
Contents:
Before getting started, ensure the package contains the following components:
| Part | Qty | |
|
Tripod mic stand with boom |
1 |
|
|
Small cable holder
|
1 |
|
|
Large cable holder
|
1 |
Assembly
Step 1:
Setting Up the Product
Loosen the circular knob. Pull the legs of the tripod downward until they are fully extended and tighten the circular knob securely.
Step 2:
Setting Up the Product
Step 3:
Setting Up the Product
Loosen the large knob. Lift the boom upward, adjust to the desired angle, and tighten the large knob securely.
Step 4:
Setting Up the Product
Loosen the small knob. Adjust the boom to the desired length and tighten the small knob securely.
Step 5:
Setting Up the Product
Attach the mic holder (not provided) on the top of the boom. Place the microphone (not provided) in the mic holder.
If a heavy microphone is used, it is recommended to add a sandbag or weight on the rear of the boom to keep it balanced.
Step 6:
Setting Up the Product
Cleaning and Maintenance
- Wipe with a dry cloth as needed to remove dust and dirt.
- Avoid contact with corrosive substances.
Safety and Compliance
- Warning: Do not let children climb on or play with the product.
- Store the product in a dry and clean area and out of reach of children.
- Handle with care.
- Regularly check if all fastening knobs and clutches are tightly secured.
- To avoid scratching the floor, assemble the product on a soft surface such as a carpet.
- Do not place heavy items on the product.
- Before assembly: Make sure that all parts have been delivered and are in good condition.
- The product should be placed on a flat horizontal surface.
Feedback and Help
We would love to hear your feedback. To ensure we are providing the best customer experience possible, please consider writing a customer review. Scan QR Code below with your phone camera or QR reader:
UK: amazon.co.uk/review/review-your-purchases#
If you need help with your AmazonBasics product, please use the website or number below.
US: amazon.com/gp/help/customer/contact-us
UK: amazon.co.uk/gp/help/customer/contact-us
+1 877-485-0385 (US Phone Number)
Frequently Asked Question
- Question: What is the tallest comfortable height this stand can get, measured from floor to clip?
Answer: Well, I just measured it and….with the stand fully extended and the boom vertical (parallel to the stand shaft) and also fully raised, the mic clip is just over 7 feet above the floor. Whether that is comfortable or not really depends on how heavy the mic or whatever you’re going to put up there is. - Question: What size is the thread?
Answer: I just want to clear things up, this is a 5/8 thread, I know it’s confusing when it says “3/8-5/8 adapter” but What they are saying is that you can get a male 3/8 – female 5/8 adapter thereby reducing the thread size - Question: Does It work with a shure sm7b? I bought a desk mic stand but the weight of the microphone pulls it down.
Answer: It should work with any mic. I have a blue baby bottle mic I use with it. It can with an adapter so it should help - Question: can I use it with MXL 990??
Answer: Yes. Your MXL 990 Should have come with a mic clip. You can screw that onto the mic stand or you could get a shock mount that is suzed for your microphone and screw that onto the mic stand to help isolate the mic from vibrations transmitted through the stand. - Question: How tall is it with the boom fully up but parallel to the ground?
Answer: if you were to extend the boom fully, while it’s parallel to the ground, the stand would tip over, unless you were to weigh down the legs somehow/ - Question: So I ordered the stage rocker mic clip but it doesn’t attach to the boom because it doesn’t have a screw part so what adapter do I buy for it to work?
Answer: Your stage rocker clip should have a female threaded socket that you can screw onto the end of the boom of this microphone stand. Perhaps your clip is missing the threaded socket. - Question: Does it work with PreSonus m7 mic?
Answer: I’m not sure if but it should be compatible with any mic. - Question: Would this hold a akg p220 with shock mount and pop filter?
Answer: Yes - Question: Can you suggest a microphone clip holder that works with this? this? https://www.amazon.com/gp/product/b00nl2xsd0/ref=oh_aui_detailpage_o00_s00?ie=utf
Answer: Any microphone clip holder will work with this stand - Question: Has anyone used this to connect to a rode polemic?
Answer: It’s a mic stand. I use them for cordless mics which are heavier than most, so should be good for any type of mic. - Question: Is there just the boom arm alone for sale?
Answer: You can probably find one online try googling it. - Question: Does this fit a. Blue baby bottle mic?
Answer: Yes
