ALLEN AND HEATH logoALLEN AND HEATH Qu-16 Digital Mixer Versatile Rack Custom Control Release Notes
V1.4.1

Qu-16 Digital Mixer Versatile Rack

ALLEN AND HEATH Qu-16 Digital Mixer Versatile Rack - icon Refer to www.allen-heath.com for instructions on how to update the
ALLEN AND HEATH Qu-16 Digital Mixer Versatile Rack - icon Avantis firmware and important notes about the update.
ALLEN AND HEATH Qu-16 Digital Mixer Versatile Rack - icon We recommend that any Config created with V1.2.4 is re-saved with V1.2.5 or higher and re-uploaded to the unit/s.
ALLEN AND HEATH Qu-16 Digital Mixer Versatile Rack - icon Check that the firmware version of the host unit supports multi-unit Configs. For example, AHM V1.30 or higher.
ALLEN AND HEATH Qu-16 Digital Mixer Versatile Rack - icon Due to security improvements, AHM processors with firmware V1.30 or higher will only connect to Custom Control app V1.3.0 or higher. Earlier versions of Custom Control (e.g. V1.2.6) will not connect, displaying an incorrect username / password error. Please ensure you update your Custom Control devices at the same time as / prior to updating the AHM processor.

V1.4.1 June 2024
Maintenance Release

Improvements:

  • dLive V2 Firmware compatibility
  • Support for RackUltra FX

Fixes:

ID575 Copying / Pasting could sometimes display a red image.
ID670 Uploading to an invalid IP address will now timeout.

V1.4.0 July 2023
Feature Release

New Features:

  • Support of AHM Room Combining, including new Room Combining widget, and Room functions for faders, buttons and Source Selectors.

Improvements:

  • Meter improvements for network performance with large Configurations / high number of devices.

Fixes:

ID595 App AM/PM function didn’t work.
ID604 Connection error with multi-unit and Custom IP configs
ID617 Opening a multi-unit config in single unit mode could cause Custom Control Editor to crash.
ID611 Graphical issues

Several other fixes and improvements.
V1.3.1 February 2023

Maintenance Release

Fixes:

ID582 The kiosk version of the Android app would not install with the adb command.
ID585 Copy/Paste would sometimes not work correctly with custom images.
ID588 New gesture settings in Android would block access to the app menu.
ID590 The default Off colour for the CC-7 and CC-10 LED bars was red.
ID591 Default unit names in a multi-unit Config now increment only if a unit of the same type already exists.
ID597 Multi-unit Configs would sometimes present connection issues after upload.

Several other fixes and improvements.
V1.3.0 January 2023
Feature Release
New Features:

  • Ability to control multiple AHM / Avantis / dLive units from the same Config or Layout
  • Keyring password management for multiple units
  • New Custom IP function for buttons – send TCP/UDP control strings to other equipment
  • New Resource Packs with custom images
  • New Colour Palettes to store custom colours
  • Ability to import/export Resource Packs and Colour Palettes
  • Custom images can be tagged for easier search / filtering
  • Option to display list of users at login
  • Option to set LED bar on CC-7 and CC-10 touch panels (static colour or linked to a mixer / processor function)
  • Clock widget with date and time
  • Horizontal faders and meters
  • Track playback control for AHM
  • Styling improvements for Source Selector widget, including option to use custom images
  • Option to lock Aspect ratio of control widgets
  • Option to lock position and dimension of control widgets
  • Grouping of control widgets for ease of handling
  • Opacity / transparency setting for images
  • Gradient option for rectangles
  • Momentary use of Paging buttons (AHM)
  • Auto-resize of oversized images when importing resources
  • Added option to toggle -inf for Level Down / Up buttons

Fixes:

ID356 Layouts with the same properties but a different Orientation would display an error in the Editor.
ID295 Custom Control would not work with the Microsoft Surface Pen.
ID431 Transparency settings would not work with Tab Container colours.
ID194 Changing tabs in a Tab Container would not clear the current object selection.
ID328 Changing tabs would in rare cases cause a software crash.
ID342, 381 Rare crashed when connecting / disconnecting.
ID348 Improvements to connection time.
ID329 Improvements to Source Selector.
ID319, 320 Issues with tool selection and full-screen mode on macOS.
ID324 Improvements to fader drag sensitivity.
ID354 Text colour option for buttons would not always work.

Several other fixes and improvements.

V1.2.6 March 2022
Maintenance Release
Fixes:

ID382 Losing or disabling the network connection could result in the app crashing in some cases.
ID392 Restarting an AHM processor via System Manager could crash the Custom Control app.

V1.2.5 December 2021
Maintenance Release
Fixes:

ID355, ID372 Connecting an earlier version of the Custom Control app to a unit with a V1.2.4 Config would reset all faders to 0dB and could display the wrong state for buttons and LEDs.

ALLEN AND HEATH Qu-16 Digital Mixer Versatile Rack - icon We recommend that any Config created in V1.2.4 is re-saved in V1.2.5 or higher and re-uploaded to the unit/s to prevent the occurrence of this bug.

ID348, ID350 Improved efficiency and memory usage of large Configs to reduce connection time and prevent freezes or crashes on low-performance hardware.

V1.2.4 July 2021
Feature Release
New Features:

  • Kiosk version for Android now supports CC-7 and CC-10 touch panels

Fixes:

ID328 Under certain circumstances, changing the number of tabs of a tab container could cause Custom Control editor to crash
ID324 Fader control sensitivity improved

V1.1.1 August 2020
Maintenance Release
ALLEN AND HEATH Qu-16 Digital Mixer Versatile Rack - icon Layouts created in V1.1.0 with AHM Zone post-compressor/post-fader meter types should be re-saved in V1.1.1 with the correct meter tap-off points selected.
Fixes:

ID321 Text labels for Meters and Chromatic Meters are not editable in V1.1.0
ID322 AHM Zone metering not displaying correctly when using Post-Compressor and Post-Fader meter types in V1.1.0

Known Issues:

ID313 Dynamic Labels not working with Avantis mixers ­ will be resolved in future Avantis firmware (V1.10)
ID317 Setting an invalid send level in Custom Control triggers warning triangle and error log entries on Avantis mixers ­ will be resolved in future Avantis firmware (V1.10)

V1.1.0 July 2020
Feature Release
New Features:

  • AHM-64 compatibility
  • Avantis compatibility
  • Text Colour option added for Button, LED and Source Selector widgets

Fixes:

ID286 Gain Reduction meter shows as unavailable on Stereo Group, Stereo Aux and Stereo Matrix
ID294 Changing colour properties of multiple Chromatic Meters does not work as expected
ID296 Gain Reduction meter on the right (R) channel of stereo inputs does not update correctly
ID300 Custom Control app doesn’t work with WiFi Mobile Data Assist

V1.00 June 2019
This is the first public release of Custom Control.ALLEN AND HEATH logo

Documents / Resources

ALLEN AND HEATH Qu-16 Digital Mixer Versatile Rack [pdf] Instructions
Qu-16 Digital Mixer Versatile Rack, Qu-16, Digital Mixer Versatile Rack, Mixer Versatile Rack, Versatile Rack

References

Leave a comment

Your email address will not be published. Required fields are marked *