ALGO 8420 IP Dual-Sided Display Speaker
Product Information
Specifications
- Product Name: Protective Cover – 8420 IP Dual-Sided Display Speaker
- Material: Polycarbonate
- Weight: Adds 6lbs (2.7kg) to the total weight of the 8420
- Manufacturer: Algo Communication Products Ltd.
- Website: www.algosolutions.com
About
- The Protective Cover – 8420 IP Dual-Sided Display Speaker is a polycarbonate cover designed to protect the display screen of the 8420 IP Dual-Sided Display Speaker from accidental contact in surrounding areas.
- It can be mounted during new installation or added to an existing 8420 already installed on the wall or ceiling.
Installation Guide
- Peel off the protective liners on both sides of each polycarbonate sheet.
- Slide the attachment brackets over each corner of the 8420 ensuring a snug fit with rubber pads.
- Install the polycarbonate sheet to the attachment brackets on both sides using the provided screws. Align the cut-out of the sheet with the speaker grill.
Important Note
This guide contains safety information that should be thoroughly read before permanently installing the product.
User Guides
For detailed user guides, visit algosolutions.com/guides/
Contact Information
For support, contact Algo Communication Products Ltd. at support@algosolutions.com or visit their office at 4500 Beedie Street Burnaby, BC, V5J 5L2, Canada.
FAQ
Q: Can the Protective Cover be used with other speaker models?
A: The Protective Cover – 8420 IP Dual-Sided Display Speaker is specifically designed for use with the 8420 model and may not fit other speaker models.
Q: Is the Protective Cover weatherproof?
A: The Protective Cover is made of polycarbonate, providing some level of protection from environmental elements, but it is not fully weatherproof. Avoid exposure to extreme weather conditions for prolonged periods.
ABOUT
- The Protective Cover – 8420 IP Dual-Sided Display Speaker is a polycarbonate cover that can be installed with the 8420 IP Dual-Sided Display Speaker to protect the display screen from accidental contact due to activities in the surrounding areas.
- The 8420PC can be mounted to a new installation of the 8420, before the wall or ceiling mount, or mounted directly to an existing 8420 already installed to the wall or ceiling.
- The full user guide for the 8420 be found on algosolutions.com/guide/.
Included
- 3/8” Polycarbonate Sheet (2)
- Attachment Brackets (4)
- 10-32 Attachment Screws (8)
Important This guide contains safety information which should be read thoroughly before permanently installing the product.
INSTALLATION
Before installing, note that adding the 8420PC to an 8420 adds 6 lbs (2.7kg) to the total weight of the 8420.
- Peel off the protective liners on both sides of each polycarbonate sheet.
- Slide the attachment brackets over each corner of the 8420. The rubber pads on the bracket will provide a snug fit.
- Install the polycarbonate sheet to the attachment brackets on both sides using the provided attachment screws.
- Each side requires four (4) screws. Ensure the rectangular cut-out of the polycarbonate sheet is aligned with the rectangular speaker grill of the 8420.
- Each side requires four (4) screws. Ensure the rectangular cut-out of the polycarbonate sheet is aligned with the rectangular speaker grill of the 8420.
Customer Service
- ©2024 Algo Communication Products Ltd.
- All Rights Reserved
- support@algosolutions.com
- IG-8420PC-06112024
- 90-00133
- support@algosolutions.com
- Algo Communication Products Ltd. 4500 Beedie Street
- Burnaby, BC, V5J 5L2, Canada www.algosolutions.com
- View full user guides at algosolutions.com/guides/
Documents / Resources
 |
ALGO 8420 IP Dual Sided Display Speaker [pdf] Instruction Manual 8420 IP Dual Sided Display Speaker, 8420, IP Dual Sided Display Speaker, Sided Display Speaker, Display Speaker, Speaker |