V3 LoRa Board
Specifications:
- Main Frequency: 240MHz
- FLASH: 8Mbyte
- Processor: xtensa32-bit LX7 dual-core processor
- Main control chip: ESP32-S3FN8
- LoRa chip: SX1262
- Deep Sleep: Supported
Product Usage Instructions:
1. Powering On the V3 LoRa Board:
To power on the V3 LoRa Board, connect it to a stable power
source using the provided power adapter.
2. Connecting to a Device:
Use the appropriate cables to connect the V3 LoRa Board to your
device. Ensure the connections are secure and match the required
specifications.
3. Configuring Settings:
Access the configuration menu on your device to set up the
necessary parameters for communication with the V3 LoRa Board.
4. Sending and Receiving Data:
Once connected and configured, you can start sending and
receiving data between your device and the V3 LoRa Board.
Frequently Asked Questions (FAQ):
Q: How do I update the firmware of the V3 LoRa Board?
A: To update the firmware, download the latest firmware version
from the official website and follow the provided instructions for
flashing it onto the board.
Q: Can I use multiple V3 LoRa Boards simultaneously?
A: Yes, you can use multiple V3 LoRa Boards simultaneously by
configuring them with unique settings to avoid interference.
Q: Is the V3 LoRa Board compatible with all devices?
A: The V3 LoRa Board is compatible with devices that support
LoRa communication protocols. Ensure your device meets the
necessary requirements for seamless integration.
Manual
EN: Please enter “V3 LoRa Board” in the URL below to get detailed instructions. DE: Für detaillierte Anweisungen geben Sie bitte ” V3 LoRa Board” in die untenstehende URL ein. FR : Veuillez saisir “V3 LoRa Board” dans l’URL ci-dessous pour obtenir des instructions détaillé es. IT: inserisci “V3 LoRa Board” nell’URL seguente per istruzioni dettagliate. ES:Introduzca “V3 LoRa Board” en la siguiente URL para obtener instrucciones detalladas. NL:Voer “V3 LoRa Board” in de onderstaande URL in voor gedetailleerde instructies.
Web:www.ainewiot.com
V3 LoRa Board
Parameters: Main Frequency: 240MHz FLASH: 8Mbyte Processor: xtensa32-bit LX7 dual-core processor Main control chip: ESP32-S3FN8 LoRa chip: SX1262 Deep sleep: <10pA USB to interface chip Cp2102 Open communication distance 2.8KM Dual-mode Bluetooth: traditional Bluetooth and BLE low-power Bluetooth Development environment: perfect support for Arduino Operating voltage: 3.3~7V Operating temperature range:-20~70°C Receiver sensitivity :-139dbm(Sf12,125KHz) Support mode:WIFI Bluetooth LORA
V3 LoRa Board
Parameter: Hauptfrequenz: 240MHz FLASH: 8Mbyte Prozessor: xtensa32-bit LX7
Dual-Core-Prozessor Hauptsteuerchip: ESP32-S3FN8 LoRa-Chip: SX1262 Tiefschlaf: <10pA USB-Schnittstellen-Chip Cp2102 Offene Kommunikationsentfernung 2.8KM Dual-Mode Bluetooth: traditionelles Bluetooth und BLE Low-Power Bluetooth Entwicklungsumgebung: perfekte Unterstü tzung für Arduino Betriebsspannung: 3.3~7V Betriebstemperaturbereich: -20~70°C Empfindlichkeit des Empfängers: -139dbm (Sf12, 125KHz) Unterstützungsmodus:WIFI Bluetooth LORA
V3 LoRa Board Paramètres : Fréquence principale : 240MHz FLASH : 8Mbyte Processeur : xtensa32-bit LX7 dual-core processor Puce de contrôle principale : ESP32-S3FN8 Puce LoRa : SX1262 Sommeil profond : <10pA
Puce d’interface USB Cp2102 Distance de communication ouverte 2.8KM Bluetooth bimode : Bluetooth traditionnel et Bluetooth basse consommation BLE Environnement de développement : support parfait pour Arduino Tension de fonctionnement : 3.3~7V Température de fonctionnement : -20~70°C Sensibilité du ré cepteur :-139dbm(Sf12,125KHz) Mode de support : WIFI Bluetooth LORA
V3 LoRa Board
Parametri: Frequenza principale: 240MHz FLASH: 8Mbyte Processore: processore dual-core xtensa32-bit LX7 Chip di controllo principale: ESP32-S3FN8 Chip LoRa: SX1262 Sonno profondo: <10pA USB al chip di interfaccia Cp2102 Distanza di comunicazione aperta 2,8KM Bluetooth a doppia modalità: Bluetooth tradizionale e Bluetooth a basso consumo
BLE Ambiente di sviluppo: supporto perfetto per Arduino Tensione di funzionamento: 3,3~7V Temperatura di funzionamento: -20~70°C Sensibilità del ricevitore: -139dbm (Sf12, 125KHz) Modalità di supporto: WIFI Bluetooth LORA
V3 LoRa Board
Parámetros: Frecuencia principal: 240MHz FLASH: 8Mbyte Procesador: xtensa32-bit LX7 procesador de doble núcleo Chip de control principal: ESP32-S3FN8 Chip LoRa: SX1262 Sueño profundo: <10pA USB a chip de interfaz Cp2102 Distancia de comunicación abierta 2,8KM Bluetooth de modo dual: Bluetooth tradicional y Bluetooth de bajo consumo BLE Entorno de desarrollo: soporte perfecto para Arduino Voltaje de funcionamiento: 3.3~7V
Rango de temperatura de funcionamiento:-20~70°C Sensibilidad del receptor :-139dbm(Sf12,125KHz) Modo de soporte:WIFI Bluetooth LORA
V3 LoRa Board
Parameters: Hoofdfrequentie: 240MHz FLASH: 8Mbyte Bewerker: xtensa32-beetje LX7 bewerker met twee kernen Hoofdbesturingschip: ESP32-S3FN8 LoRa-chip: SX1262 Diepe slaap: <10 pA USB naar interfacechipCp2102 Open communicatie afstand2.8KM Dual-mode Bluetooth: traditionele Bluetooth en BLE low-power Bluetooth Ontwikkelomgeving: perfecte ondersteuning voor Arduino Bedrijfsspanning: 3,3 ~ 7V Bedrijfstemperatuurbereik: -20 ~ 70 ° C Ontvangersgevoeligheid: -139dbm (Sf12, 125KHz) Steunwijze: WIFI Bluetooth LORA
FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Documents / Resources
 |
ainewiot V3 LoRa Board [pdf] User Manual 2BM37-YY1-0292, 2BM37YY10292, yy1 0292, V3 LoRa Board, V3, LoRa Board, Board |