AeroCool Quantum/Quantum Mesh Miditower User Manual
AeroCool Quantum/Quantum Mesh Miditower

Front I/O Cable Connection

Front I/O Connectors
(Please refer to the motherboard’s manual for further instructions).
Front I/O Cable Connection

Note Specifications may yaw depending on your region. Contact your local retailer for more information.
Front I/O Cable Connection

Accessory Bag Contents

  1. SSD Screw MB Screw
    Accessory Bag Contents
  2. PSU Screw PCI Screw
    Accessory Bag Contents
  3. HDD Screw
    Accessory Bag Contents
  4. 3.5* HDD Sliding Screw for (4b)
    Accessory Bag Contents
  5. MB Standoff
    Accessory Bag Contents
  6. Cable tie
    Accessory Bag Contents

How to Install

  1. Install Motherboard
    How to Install
  2. Install PSU
    How to Install
  3. Install Add-on-Card
    How to Install
  4. a. Install 3.5″ HDD x1
    How to Install How to Install
    b.Install 3.5″ HDD x1
    How to Install How to Install
  5. a. Install 2.5″ SSD x2
    How to Install How to Install
    How to Install
    b. Install 2.5″ SSD x 2 (only for Mini-ITX M/B)
    How to Install How to Install
    How to Install
  6. a. Install Front Radiator
    How to Install How to Install
    How to Install
  7. a. Install Front Fans
    How to Install How to Install
    How to Install
    b. Install Rear Fan
    How to Install
    c. Install Top Fans
    How to Install
    d. Install PSU Fans
    How to Install

I/O Panel

I/O Panel

Press and hold LED Control Button for 3 sec to turn off LED. (For RGB Version Only)

Note: Specifications may vary depending on your region. Contact your local retailer for more information.

Documents / Resources

AeroCool Quantum/Quantum Mesh Miditower [pdf] User Manual
Quantum, Quantum Mesh, Miditower

References

Leave a comment

Your email address will not be published. Required fields are marked *