ADAM MATRIX 11 iPad Magic Keyboard User Manual

Bluetooth connection:
1. Press the fn + Bluetooth key to enter the pairing state.
2. The caps lock key flashes white once every 1 second.
3. Turn on Bluetooth on the iPad.
4. Select the device named (MATRIX 11 or MATRIX 12).
5. Open the connection to pair. After successful pairing, the indicator turns off. (No need to follow these steps again after the first pairing.)

Compatible Models

MATRIX 11: iPad Pro 11-inch (1st, 2nd, 3rd and 4th generation), iPad Air 11-inch (M2), iPad Air 10.9-inch (4th and 5th generation)

MATRIX 12: iPad Pro 12.9-inch (3rd, 4th, 5th and 6th generation), iPad Air 13-inch (M2)

Attention

Do not disassemble, puncture, drop, bend, or modify.
Do not shake while charging.

Unplug the device when fully charged.
Do not expose to liquids.

Keep away from children.
Avoid extreme temperatures.

Warranty Information
This device comes with a 3-Year Limited Warranty. For the fastest and safest charge, use an ADAM cable, your device’s original cable, or a certified cable (such as MFi).

FCC Information
This device complies with part 15 of the FCC Rules. Operation is subject to certain conditions. For more information, refer to the FCC ID provided in the manual.

Contact Information
For more information, please visit the ADAM store or contact ADAM Elements International Co., Ltd. at support@adamelements.com or +886-2-2738-9900.

FAQ

Q: What should I do if the keyboard is not responding?
A: Try turning off the keyboard and then turning it back on. If the issue persists, check your device’s Bluetooth settings and ensure proper pairing.

Specification

iPad Magic Keyboard
Model Name: MATRIX 11/MATRIX 12
- Input Interface: USB-C
- Input Power: 5V=450mA
- Battery Capacity: 3.7V / 600 mAh
- Backlight Sleep Time: 1 min
- Keyboard Sleep Time: 30 mins
MATRIX 11
Size: 193 x 253 x 16.5 mm Weight: 650.5 g
MATRIX 12
Size: 229 x 286 x 17.5 mm Weight: 866 g
3-Year Limited Warranty

Product Introduction

Snap Your iPad

Open the MATRIX.
Adjust the top cover to the viewing angle.

Snap your iPad to the top cover.

How to use

Power on
Expand the keyboard, the device will automatically turn on.
Bluetooth connection
1. Press the fn + Bluetooth key to enter the pairing state. The caps lock key flashes white once every 1 second
2. Turn on Bluetooth “on” the iPad.
3. Select the device named “(MATRIX 11 or MATRIX 12)”
4. Open the connection to pair. After the connection is successful, the indicator turns off.
  (No need t follow these steps again after the first pairing.)

LED Indicator Introduction

Power indicator

Power on
Solid Red for 3 seconds
Charging
Solid red
Low battery
Flashing red once every 3 seconds

Fully charged
Solid green

Compatible Models

MATRIX 11
- iPad Pro 11-inch (1st, 2nd, 3rd and 4th generation)
- iPad Air 11-inch (M2)
- iPad Air 10.9-inch (4th and 5th generation)
MATRIX 12
- iPad Pro 12.9-inch (3rd, 4th, 5th and 6th generation)
- iPad Air 13-inch (M2)

Attention

Do not disassemble, puncture, drop, bend or modify
Do not shake while charging
Unplug the device when fully charged

Do not expose to liquids
Keep away from children
Avoid extreme temperatures

3-Year Limited Warranty
For the fastest and safest charge, use an ADAM cable, your device’s original cable, or a certified cable (such as MFi).
The information in this user manual may be changed without prior notice, please scan the QR code for the latest version.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.

Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution:
Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

FCC ID: 2ABY9MATRIX-11 CCAJ24LP7300T2
FCC ID: 2ABY9MATRIX-12 CCAJ24LP7301T4