Instant Glucometer
“
Product Information:
Specifications:
- Device Function: Blood sugar measuring device
- Measurement Time: Less than four seconds
- Lancing Depths: 11 levels (0.5 to 5.5)
- Display: Arrow indicator for test result interpretation
Product Usage Instructions:
Measuring Blood Sugar:
- Insert Test Strip:
Wash hands with warm soapy water, dry thoroughly. Insert test
strip to turn on the device. - Collect Blood:
Use lancing device when the drop symbol blinks to collect blood
sample. - Apply Blood:
Touch the yellow edge of the test strip with the blood drop.
Remove finger when hourglass symbol appears. - Read Test Result:
Test result appears in less than four seconds on display. Arrow
indicates target range status.
Easy Blood Collection Steps:
- Preparation:
Wash hands with warm water and soap, dry well.
- Remove Cap:
Take off cap from lancing device.
- Insert Lancet:
Place new lancet in holder, adjust depth, cock device, and
collect blood. - Eject Used Lancet:
Remove cap, slide ejector, and dispose of used lancet.
Frequently Asked Questions (FAQ):
Q: How do I know if my test result is within the target
range?
A: The arrow indicator on the display will show whether your
test result is above, within, or below your target range.
Q: Can I reuse test strips or lancets?
A: No, test strips and lancets are for single use only to ensure
accurate results and reduce the risk of contamination.
“`
Four steps for measuring blood sugar
1
2
Navigation button
Intuitive color scale )to interpret your measurements(
Navigation button
Ejection button
Insert test strip Wash your hands with warm soapy water and dry them thoroughly before you start the measuring process. The measuring unit turns on when you insert the test strip into the device.
3
Collect blood When the blinking drop symbol appears, use the lancing device to collect the blood sample.
4
Test strip slot
Test strip with yellow area to apply blood sample
Apply blood
Touch the yellow edge of the test strip with the drop of blood. Take your finger away from the test strip as soon as the blinking hourglass symbol appears on the display.
Read the test result
The test result appears in less than four seconds on the display. The arrow indicates whether your test result is above, within or below your target range.
Easy collection of blood in a few steps
1
2
3
Cocking button
Preparation
Wash your hands with warm water and soap before you take the blood sample. Dry your hands well.
Remove the cap Pull the cap off of the lancing device.
Insert the lancet
Place a new lancet in the lancet holder. Twist the protective cap off of the lancet. Put the cap back on the lancing device.
4
5
Release button
Protective cap
Lancet Twistable cap
Adjust the lancet depth
You can set 11 lancing depths )0.5 to 5.5(. Turn the cap until it aligns with the desired lancing depth mark.
ACCU-CHEK, ACCU-CHEK INSTANT und SOFTCLIX sind Marken von Roche. © 2025 Roche Diagnostics Deutschland accu-chek.de | Roche Diagnostics Deutschland GmbH | Sandhofer Straße 116 | 68305 Mannheim
Cock the lancing device and take a drop of blood
Press the cocking button all the way through. The lancing device is cocked when the middle of the release button is yellow. Hold the lancing device firmly on to the desired puncture site. Press the release button in order to collect the blood.
6
Eject the used lancet Take the cap off of the lancing device and slide the ejector forward. The used lancet will be ejected. Put the cap back on.
0625 Englisch
Documents / Resources
 |
ACCU-CHEK Instant Glucometer [pdf] Instructions Instant Glucometer, Instant, Glucometer |