CoMo Wireless Intercom System Headsets
Accsoon CoMo Product Information
Specifications
- Communication Range: 1312ft / 400m (with no
barriers and interference) - Battery Capacity: 2320 mAh (single
battery) - Operating Time: Remote headset: 13 hours, Host
headset: 10 hours (4 remotes in connection), Host headset: 8 hours
(8 remotes in connection) - Signal-to-noise Ratio: >65dB
- Microphone Type: Electret
- Communication Sampling Rate: 16KHz/16bit (8
remotes in connection) - Weight: 257g (Single headset with
battery) - Size: 241.8 x 231.5 x 74.8 mm (single
headset) - Operating Temperature: -15~45°C
Product Usage Instructions
1. First Use
- Open the battery slot and insert the battery.
- Turn on both the host and remote headsets by pushing the power
switch to ON. The headsets will play a Power On voice prompt, and
the indicator will show a slow green flicker. - Turn on the microphone.
2. Volume Control
To adjust the volume, use the Volume+ and Volume- buttons on the
headset.
3. Indicator Status and Voice Prompt
The indicator light on the headset provides various status
indications:
- Disconnected: Slow green flicker
- Connected: Green light stays on
- Mute On: Red light stays on
- Mute Off: Green light stays on
- Battery Level Low: Slow red flicker
- Battery Level Lower than 10%: Slow red
flicker
Frequently Asked Questions (FAQ)
Connection Drops
If you experience connection drops, try re-pairing the host and
remote headsets. Ensure there are no obstacles or interferences
affecting the communication range.
Pairing and Host Headset Memory Clearing
To pair new devices or clear pairing memory:
- If your host headset’s memory isn’t fully used, follow the
pairing guidelines to add new remote headsets. - If a remote headset needs to pair with a new host headset,
clear the remote headset’s pairing memory following the
instructions in the manual before pairing it with the new host
headset.
User Manual
contents
01 Packaging List
06 Product Features
06 Product Description
06 Instruction 06 Accsoon CoMo 08 First use
08 Volume control 10 Indicator status and voice prompt
11 Specifications 12 FAQ 14 Warranty
14 After sales 15 Safety Information 15 Contact Us
19 24
24 24 26
29 30 32
24
27 28 32 32 33
1.Packaging list
Accsoon CoMo (1 host headset, 8 remote headsets) package includes
Host Headset × 1
Remote headset × 8
Battery × 18
Battery charger × 2
Battery storage box × 3
Headset ear cushion × 9
Microphone windscreen × 9
Headset storage bag × 9
Storage container × 1
User manual × 1 1
Accsoon CoMo (1 host headset, 6 remote headsets) package includes
Accsoon CoMo (1 host headset, 4 remote headsets) package includes
Host Headset × 1
Remote headset × 6
Battery × 14
Battery charger × 2
Battery storage box × 3
Headset ear cushion × 7
Microphone windscreen × 7
Headset storage bag × 7
Storage container × 1
User manual × 1
2
Host Headset × 1
Remote headset × 4
Battery × 10
Battery charger × 1
Battery storage box × 2
Headset ear cushion × 5
Microphone windscreen × 5
Headset storage bag × 5
Storage container × 1
User manual × 1
3
Accsoon CoMo (1 host headset, 2 remote headsets) package includes
Accsoon CoMo (Single headset) package includes:
Host Headset × 1
Remote headset × 2
Battery × 6
Battery charger × 1
Battery storage box × 1
Headset ear cushion × 3
Microphone windscreen × 3
Headset storage bag × 3
Storage container × 1
User manual × 1
4
Headset × 1
Battery × 2
User manual × 1
Headset ear cushion × 1
Microphone windscreen × 1
5
2.Product Description
Thank you for choosing the Accsoon CoMo — A full-duplex wireless intercom system. Accsoon CoMo is equipped with Accsoon stability, seamlessly supporting communication for teams of up to 9 people. With its all-new product design and enhancements from ENC technology, the Accsoon CoMo, with no need of base station, can provide a 400 -meter (1312 f t) line of sight connection range and over 10 hours of noisefree communication experience. The Accsoon CoMo could be your perfect team communication solution for added convenience and better connectivity.
3.Product Features
·Flip-to-mute microphone ·10+ hours of extended battery life ·Environmental noise cancellation(ENC) ·1312ft line of sight transmission range ·Full duplex real-time audio communication ·1 host headset can support up to 8 remote headsets ·Industry leading wireless stability for easier real time communication ·Ergonomic headset design, compatible for both left ear and right ear wearing ·Simply power on for immediate use, rebuild connection automatically after signal loss
4.Instruction
Accsoon CoMo
Marking badge Noise sensing microphone
Green badge for the host headset Grey badge for remote headsets
Volume+ Volume-
6
Antenna
Firmware update port
Battery slot Pairing button
Microphone boom Indicator
Microphone
ENC switch
Power switch 7
First use
STEP 1
As the picture shown, open the battery slot and put in the battery.
STEP 2
Push the host and remote
ON
headsets’power switch to”ON”,
the headset will be powered
on and play “Power On”
voice prompt. Indicator will
OFF
show a slow green flicker.
Slow green flicker
STEP 3 Headset connection ·Host and remote headsets are pre-paired in default. The headsets will automatically start connecting when powered on. ·The remote headsets will play “Connected” voice prompt once successfully connected to the host headset.
STEP 4 Turn on the microphone
· As the picture shown, when the microphone boom is placed at±45°, the inidicator will remain on with red light and the microphone is muted. · To turn on the microphone, push the microphone boom forward to 45° the indicator will remain on with a green light. ·You will hear a “Toot” voice prompt, when the microphone is turned on/off.
NoteMaximum swivel angle of the boom shaft±135°
Volume control
1.Push the volume “+” or “-” button on the side of the headset to turn the volume up or down. 2.The volume “+” or “-“button on the headsets can only be used for hearing volume control, not the microphone volume nor the sound effect. 3.The headsets have 7-level adjustable volumes. and is initially set to level 4. The headset can remember the last setting of the volume level. 4.The environmental noise cancellation (ENC) is set to be ON by default when the headset’s powered on. You can manually turn off the ENC mode by clicking the ENC switch button.
ENC
8
9
Indicator status and voice prompt
Manual Instruction
Indicator
Disconnected
Push the power switch to Slow green flicker
“ON”
Connected
Green light stays on
Push the power switch to “OFF”
Indicator off
Lift up the mic boom
Mute on:
Mic mute on
Red light stays on
Put down the mic boom
Mute off:
Mic mute off
Green light stays on
Turn the volume to /
maximum/minimum
Indicator stays on
Connection success (light color follows
microphone status)
Connection drops
Slow green flicker
Voice Prompt Power On
Power Off
Toot
Toots Connected Disconnected (Remote headset only)
Pairing
Fast green flicker
Pairing
Pairing success Press the “ENC” Button
Indicator stays on (light color follows microphone status)
/
Pairing success
ENC On Noise Cancelling On
ENC Off Noise Cancelling Off
Battery Level lower than 10%
Slow red flicker
Battery Level Low
5.Specifications
Label
Description
Communication 1312ft / 400m (with no barriers and interference))
Range
Battery Capacity
2320 mAh (single battery)
Operating Time
Signal-to-noise Ratio
Remote headset: 13 hour Host headset: 10 hour (4 remotes in connection) Host headset: 8 hour (8 remotes in connection)
>65dB
Microphone Type
Electret
Communication Sampling Rate
16KHz/16bit (8 remotes in connection)
Weight
257g (Single headset with battery)
Size
Operating Temperature
241.8 x 231.5 x 74.8 mm (single headset) -15~45
10
11
6.FAQ
Connection drops
1.If the host headset was powered off, or the distance between host and remote headsets is too far, the remote headsets will be disconnected from the host, and the indicators on the remote headsets will turn into slow green flickers and play “Disconnected” voice prompt. 2.When the remote headsets are disconnected from the host headset, you can reconnect the headsets by powering on the host headset or put the host and remote headsets back into the communication distance, the remote headsets will automatically reconnect to the host headset. Remote headsets’ indicator will stay on with green light and will play “Connected” voice prompt.
Pairing and host headset memory clearing
Pairing
PAIR
Fast green flicker
1. Switch the power button on both the host and remote headsets to “ON”. 2. Press and hold the pairing button on the host headset for 3 seconds to enter pairing mode. The indicator will show fast green flickers, with no prompt voice. 3. Press and hold the pairing button on remote headsets for 3 seconds to enter pairing mode. The remote headsets will play “Pairing” voice prompt, and the indicator will show fast green flickers. 4. If the pairing succeed, remote headsets will play “Pairing success” voice prompt and the indicator will show slow green flickers. 5. Please press and hold the pairing button on the host headset for 3 seconds to exit pairing.
Note: Please ensure you exit pairing mode before using Accsoon
CoMo for communication.
12
Memeorize pairing information
Host headset × 1
Max Remote headset × 8
1. One host headset can connect and memorize 8 remote headsets at the maximum. If your host headset’s memory isn’t fully used, you can follow previous guideline to pair and add new remote headset(s).
2. A single remote headset can only store pairing information of one host headset at a time. To pair it with a new host headset, please follow the instructions in previous guideline to clear the remote headset’s pairing memory and then pair it with the new host headset.
Note: If you have multiple Accsoon CoMo host and/or remote headsets, follow previous guideline to arrange the pairing memory of each host/remote group. Two seperate groups of Accsoon CoMo can work in the same place without interference.
Pairing overtime
The pairing mode will last for 120s. The headsets will automatically exit pairing mode.If host/remote headsets are unable to pair up within the time limit, follow previous guideline to restart pairing.
Pairing memory clearing
If your host headset has already memorized 8 remote headsets, to replace the remote headsets, please follow the steps below to clear the existing pairing memory.
1. Switch your host headset power switch to “ON”. 2. Press and hold both the volume up “+” and down “-” button for 3 seconds. The host headset’s indicator will alternately flash red and green lights, indicating that the host headset has entered the memory clearing process 3. Once the pairing memory is fully cleared, the host headset’s indicator will change to slow green flickers.
Note: You only need to execute the pairing memory clearing process on the host headset. After you fully cleared the memory of the host headsets, please follow previous guideline to pair up the host and remote headsets, The new pairing information will be automatically memorized after successful pairing.
13
7.Warranty
Warranty period
1. If product quality related issues occur within 15 days of receiving the product, Accsoon provides complimentary maintenance or replacement. 2. Under proper use and maintenance, from the date of receipt, Accsoon provides a one-year warranty on the main product (headset, battery charger) and a three-month warranty on the battery. Free maintenance service is available during the warranty period. 3. Please keep the proof of purchase and the user manual.
Warranty exclusion
1. Out of warranty period (If the proof of purchase is unavailable, the warranty will be calculated from the date the product is delivered from the manufacturer).
2. Damage caused by use or maintenance of not following the requirements of the user manual.
3. Accessories not covered by warranty (ear cushions, windscreens, headset sleeves, storage bags and containers).
4. Unauthorized repair, modification or disassembly.
5. Damage caused by force majeure such as fire, flood, lightning strike, etc.
8.After sales
1. Please contact your local Accsoon authorized dealers for after-sales service. When there is no authorized dealer available in your region, you can contact Accsoon through email at support@accsoon.com or contact our customer service through our website (www.accsoon.com).
2. You can get detailed solutions from authorized dealers orAccsoon.
3. Accsoon reserves the right to review the damaged product.
9.Safety information
1. When operating this equipment, read and follow all the instructions in this manual.
2. Use only accessories/batteries/chargers specified or recommended by Accsoon.
3. Do not expose to moisture, excessive heat or fire.
4. Keep away from water and other liquids.
5. Keep the equipment properly during lightning storms or when unused for long periods of time.
6. Please do not use the product in a place overheating, under cooling or with lots of moisture, or nearby strong magnetic devices.
7. To reduce the risk of fire or electric shock, refer servicing to qualified service personnel.
14
15
36
Documents / Resources
 |
ACCSOON CoMo Wireless Intercom System Headsets [pdf] User Manual CoMo Wireless Intercom System Headsets, Wireless Intercom System Headsets, Intercom System Headsets, Headsets |
