ABtUS-logo

ABtUS Wireless Bluetooth Microphone Transmitter/Receiver

ABtUS-Wireless-Bluetooth-Microphone-Transmitter-Receiver-product

Specifications

  • Profile: Advanced Audio Distribution Profile (A2DP)
  • Output Power: Class 1 for reliable connectivity
  • Transmission Distance: Up to 35 meters (unobstructed line of sight)
  • Battery Requirements: Uses 4 AAA batteries (2 for the transmitter, 2 for the receiver)
  • Battery Life: Approximately 8 hours of continuous use
  • Carrier Band Frequency: ISM band 2.400~2.4835GHz
  • Transmit Power: +5dBm for enhanced signal strength
  • Receive Sensitivity: -85dBm for reliable audio reception
  • Maximum Output Voltage: 110mV (RMS)
  • Maximum Current Consumption: 70mA
  • Weight: Transmitter: 29g, Receiver: 32g (batteries not included)
  • Frequency Response: 25~19KHz for rich, clear audio

Key Features

  • Quick Pairing: Connect your devices in less than 2 seconds, ensuring a seamless audio experience.
  • Bluetooth Audio Streaming: Play music from smartphones and tablets through Bluetooth, enhancing your audio setup without the clutter of wires.ABtUS-Wireless-Bluetooth-Microphone-Transmitter-Receiver-fig-1

Connecting the Device

  1. Ensure the device is charged or connected to a power source.
  2. Turn on the Bluetooth Microphone Transmitter/Receiver.
  3. Enable Bluetooth on your smartphone or tablet.
  4. Search for available Bluetooth devices and select the ABtUS device to pair.
  5. Once connected, you can start streaming audio wirelessly.

Using Bluetooth Audio Streaming

  1. Pair your smartphone or tablet with the ABtUS device by following the steps above.
  2. Play music or audio on your mobile device.
  3. The audio will be wirelessly transmitted to the ABtUS device for clear sound output.

Frequently Asked Questions

Q: How do I know if the device is successfully paired?
A: When the Bluetooth Microphone Transmitter/Receiver is paired, you will usually hear a confirmation sound or see a notification on your connected device.

Q: Can I pair multiple devices with the ABtUS device?
A: The ABtUS device typically allows pairing with one device at a time. To switch devices, disconnect from the current one and pair with the new device following the connection steps.

Documents / Resources

ABtUS Wireless Bluetooth Microphone Transmitter/Receiver [pdf] Instructions
Wireless Bluetooth Microphone Transmitter Receiver, Bluetooth Microphone Transmitter Receiver, Microphone Transmitter Receiver, Transmitter Receiver, Receiver

References

Leave a comment

Your email address will not be published. Required fields are marked *