AB Shutter3 B04 Bluetooth Remote Control
Product Usage Instructions
- Installation and Operation:
- Ensure the device is installed and operated with a minimum distance of 5mm between the radiator and your body to comply with RF radiation exposure limits.
- Regulatory Compliance:
- Operate the device in accordance with Innovation, Science and Economic Development Canada’s license-exempt RSSs. Ensure the device does not cause interference and can accept any interference that may occur.
- Accessories:
- Avoid using third-party belt clips, holsters, or similar accessories that contain metallic components. Body-worn accessories should meet RF exposure requirements to comply with regulations. Only use the supplied or approved antenna.
FAQs
- Q: Can I use any antenna with this device?
- A: No, use only the supplied or an approved antenna to ensure compliance with RF specifications.
- Q: What is the minimum distance required between the device and the body?
- A: Maintain a minimum distance of 5mm between the radiator and your body for safe operation within RF exposure limits.
PRODUCT INFORMATION
- This product is based on Bluetooth 5.0/5.2. It can remotely control the camera photographing function of the mobile phone through the button of the Bluetooth self-timer, thus realizing remote control of the mobile phone photographing.
- This product also serves as Android and Apple systems. You can take photos and record videos by connecting Bluetooth without switching.
Operation
- Press and hold the key to start the machine and the blue light flashes.
- Open the mobile phone “Settings”, find “Bluetooth”, and search for the Bluetooth device name: AB Shutter3.
- Turn on “Camera” and click the self-timer button to take pictures.
Product specification
- Bluetooth version: 5.0/5.2
- Bluetooth distance; 10m
- Battery model: CR 2032
- Service life: more than 3 months
FCC
FCC Warning
15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, includinginterference that may cause undesired operation. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipmentdoescause harmful interference to radio or television reception, which can be determined by turning equipment off and on, the user is encouraged to try to correct the interference by one ormore of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF Radiation Exposure Statement:
This Transmitter must not be co-located or operating in conjunction with any other antenna ortransmitter.
- This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
- This equipment should be installed and operated with a minimum distance of 5mm between the radiator and your body.
IC Warning
- This device complies with Innovation, Science, and Economic Development Canada’s license-exempt RSSs. Operation is subject to the following two conditions:
- This device may not cause interference;
- This device must accept any interference, including interference that may cause undesired operation of the device
- The information listed above provides the user with the information needed to make him or her aware of a RF exposure, and what to do to assure that this radio operates within the exposure limits of this radio. The device complies with RF specifications when the device used at 5mm from the body. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied oran approved antenna.
Documents / Resources
 |
AB Shutter3 B04 Bluetooth Remote Control [pdf] User Manual 2BMNI-B04, 2BMNIB04, B04 Bluetooth Remote Control, B04, Bluetooth Remote Control, Remote Control, Control, Remote |
