SNRMD2 Wi-Fi Router User Manual

This step allows you to configure IPTV/SIP ports based on your ISP’s requirements. Choose the type of service and set the VLAN ID if needed, or leave it blank for bridge mode.

Indicators

(!) Power
(1) Wi-Fi 2.4GHz

(!) VPN connection
(1) LAN connection

(!) System indicator
(1) WAN connection

CONNECT YOUR ROUTER ТО ТНЕ INTERNET

Connect саЫе from your ISP to the WAN port of the router
Connect your computer to the LAN port or use Wi-Fi

INTERNET ACCESS CONFIGURATION

Attention! You will need to obtain a configuration guide from your ISP.

Туре of connection

Credentials (login/password for L2TP. РРТР connection. IP/Gateway/ IP mask for Static IP). lf your connection type is DHCP(Automatic), then you won’t need any special credentials

Configuring SNR-CPE with SNR-CPE-CONFIG арр

Connect your Android device to the Wi-Fi network, which is stated оп а sticker at the bottom of the router
Open SNR-CPE-Config арр
Choose «Quick Setup Wizard» and follow the instructions

CONFIGURING USING WEB BROWSER

Open WЕВ browser
Enter address 192.168.l.l
Follow the instructions

STEP 1: Enter the standard login and password, which аге stated оп the bottom sticker, and press the «Login» button. Pic 1
STEP 2: Choose «Quick Setup Wizard» from the main menu and push the «Proceed» button. Choose а system language and push the «Proceed» button. Pic 2
STEP 3: Choose the connection protocol used Ьу your ISP. Enter connection credentials if needed and push the «Proceed» button. Pic 3
STEP 4: Configure the Wi-Fi network. Enter network name (SSID), аuth mode and а password (not less than в symbols, using letters and digits). It’s recommended to use «WPA2 Personal». Push the «Proceed» button. Pic 4.
STEP 5: Configuring VLAN ID. This page allows you to configure IPTV/SIP ports, provided Ьу your ISP using tagged VLAN 1D or in bridge mode.
- Choose а type of service and state VLAN 1D if availaЫe, or leave this field Ыank to use а bridge mode. Pic 5.
- lf your ISP doesn’t require VLAN 1D or а bridge mode, then keep the default values.
STEP 6: Change the default password and push the «Proceed» button. After applying all changes, the router will restart. Don’t turn off the power while the router restarts. Pic 6.

INDICATORS

WARRANTY CARD

warranty period is 24 months from the date of purchase

Model
- Serial number——————————————
- Date of purchase——————————————
- Seller organization——————————————

DATE OF MANUFACTURE OF ТНЕ DEVICE

The date of manufacture of the device is encrypted in the serial number. The serial number of the type «RT622G31022300000I» consists of the following parts.

SNR management and configuration арр

MODELS AND TECHNICAL DETAILS

MODELS AND TECHNICAL DETAILS OF SNR ROUTERS FAMILY

SNR-CPE-W4N (rev.N)

Power
- 5V, lA

Wi-Fi
- Wi-Fi 802.llЬ/g/n, MIMO 2х2
LAN ports
- 4xLAN 10/100 Ethernet
WAN рогt
- 10/100 Ethernet

USB рогt
- Not available
Working temperature
- 0°С ~ 40°С

SNR LTE

Power
- 12V, lA
Wi-Fi
- 802.llb/g/n, MIMO 2х2

LAN ports
- 2xLAN 10/100 Ethernet
- LTE Cat.4 up to I50mbit/s
- LTE-FDD: В1/В3/В5/87/В8/В20/В28
- LTE-ТDD: В38/В40/В41
- WCDMA: В1/В8
- GSM: 900/1800
WAN рогt
- 10/100 Ethernet

USB рогt
- USB 2.0
Working temperature
- 0°С ~ 40°С

SNRMD2

Power
- 12V, lA
Wi-Fi
- 802.lla/b/g/n/ac, Wave 2
- MU-MIMO 2х2:2
LAN ports
- 4xLAN 10/100 Ethernet

WAN рогt
- 10/100 Ethernet
USB рогt
- Not available
Working temperature
- 0°С ~ 40°С

SNR-CPE-ME2-Lite (rev. В)

Power
- 12V, lA

Wi-Fi
- 802.lla/blg/n/ac, Wave 2
- MU-MIMO 2х2:2

LАN-порты
- 4xLAN 10/100/1000 Ethernet
WAN рогt
- 10/100/1000 Ethernet
USB рогt
- Not available

Working temperature
- О0С ~ 40°С

SNR-CPE-ME2-SFP Lite

Power
- 12V, 1,5А
Wi-Fi
- 802.lla/b/g/n/ac, Wave 2
- MU-MIMO 2х2:2
LAN ports
- 4xLAN 10/100/1000 Ethernet
WAN рогt
- 10/100/1000 SFP

USB рогt
- Not available
Working temperature
- 0°С ~ 40°С

SNRAX2

Power
- 12V, lA
Wi-Fi
- 802.lla/BLg/n/ac/ax

LAN ports
- 4xLAN 10/100/1000 Ethernet
WAN рогt
- 10/100/1000 Ethernet
USB рогt
- Not available

Working temperature
- О0С ~ 40°С

ANNEX

MANUFACTURER INFORMATION

UAE lmporter: Grond Block Technologies L.L.C., UAE, Duboi,
Office M-03, Al Garhoud Business center Building
КZ lmporter: NAG Kazokhston LLC, Kazokhston, Almoty, st.

Aboi 151/1109
UZ lmporter: NAGTECH LLC, Uzbekiston, Toshkent,
st. Mirzo Ulug’bek 520

Website: snr.global
E-mail: sale@snr.global
Technical support portal: snr.support

«NAG» company reserves the right to change and improve appearance, technical characteristics and Bох contents without prior notice.

FAQ

Q: How do I reset my router to factory settings?
- A: To reset your router, locate the reset button, which is usually found on the back of the device. Use a paper clip to press and hold the button for about 10 seconds until the router restarts.

Q: How can I update the firmware of my router?
- A: Check the manufacturer’s website for firmware updates specific to your router model. Download the latest firmware file and follow the instructions provided to update your router’s firmware.

Documents / Resources

SNR SNRMD2 Wi-Fi Router [pdf] User Manual
SNRMD2, SNR-CPE-W4N, SNR-CPE-ME2-Lite, SNRMD2 Wi-Fi Router, Wi-Fi Router, Router

References

User Manual

SNRMD2 Wi-Fi Router

Product Usage Instructions