snapmaker J1 IDEX 3D Printer User Guide
Foreword
Before using your Snapmaker J1, make sure to read thoroughly and understand the Safety Guidelines. Failure to follow the safety instructions may result in personal injury, inferior results, or damage to the product.
In the Box
- Snapmaker J1 3D Printer × 1
- Quick Start Guide × 1
- Safety Guidelines × 1
- Calibration Card × 1
- Filament × 2
- Left Door × 1
- Right Door × 1
- Side Panel × 2
- PEI Glass Plate × 1
- Tool Box × 1
a. USB Flash Drive × 1
b. Wire Brush × 1
c. Power Cable × 1
d. Glue Stick × 1
e. Palette Knife × 1
f. Tweezers × 1
g. Diagonal Pliers × 1
h. Filament Holder × 2
i. USB-B Cable × 1
j. Hex Key × 4
k.Open-end Wrench × 1
l. M3 × 6 Screw × 16
m. M4 × 10 Screw × 4
n. Hot End Sock × 2
o. Wiping Cloth × 1
Installation
Place the Printer Horizontally
Install Filament Holders
Install Side Panel
Install Doors
Install the PEI Glass Plate
Connect the Power Cable
Using the Printer
Turn on the printer
Follow the guidance of the Touchscreen to set up your printer
Complete the general settings
Follow the Wizard to complete the steps needed to start a print
Starting a Print
Download Lava Studio at https://support.snapmaker.com and install it on your computer.
Slice your model and generate the G-code file in Lava Studio
Send the G-code file to the printer via Wi-Fi or USB flash drive.
On the Touchscreen, tap the blank area in the home screen to select the file to print.
Resourses
A detailed User Manual is available on our Support website:
Select Snapmaker J1 > Go to User Manual.
The latest version of this guide is on our Support website:
Select Snapmaker J1 > Go to Quick Start Guide.
We are here for you whenever you need general information or technical support:
Purchase spare parts and materials:
Share anything you want with other Snapmaker users in our community:
Documents / Resources
 |
snapmaker J1 IDEX 3D Printer [pdf] User Guide J1 IDEX 3D Printer, J1, J1 Printer, IDEX 3D Printer, J1 3D Printer, 3D Printer |
 |
Snapmaker J1 IDEX 3D-Printer [pdf] User Guide J1 IDEX 3D-Printer, J1, IDEX 3D-Printer, 3D-Printer, Printer |
 |
Snapmaker J1 IDEX 3D Printer [pdf] User Guide J1 IDEX 3D Printer, J1 IDEX, 3D Printer, Printer |
