Chii chinonzi Z-Wave?

Z-Wave ndiyo yepasirese isina waya protocol yekutaurirana muSmart Home. Izvi
mudziyo wakakodzera kushandiswa munharaunda yakataurwa muchikamu che Quickstart.

Z-Wave inovimbisa kutaurirana kwakavimbika nekusimbisa meseji yese (nzira mbiri
kutaurirana) uye ese mains powered node anogona kuita seanodzokorora mamwe ma node
(meshed network) kana iyo inogamuchira isiri yakananga isina waya renji ye
transmitter.

Ichi chishandiso uye chimwe nechimwe chakasimbiswa Z-Wave chishandiso chinogona kuva kushandiswa pamwe chete nezvimwe
yakasimbiswa Z-Wave mudziyo zvisinei nerudzi uye kwaakabva chero bedzi ari maviri akakodzera kune
zvakafanana frequency range.

Kana mudziyo unotsigira kukurukurirana kwakachengeteka ichataurirana nemimwe michina
yakachengeteka chero bedzi chigadziro ichi chinopa imwechete kana yakakwirira yehutano.
Zvikasadaro zvinongoerekana zvashanduka kuita yakaderera mwero wekuchengetedza kuchengetedza
kumashure kugarisana.

Kuti uwane rumwe ruzivo nezve Z-Wave tekinoroji, zvishandiso, machena mapepa nezvimwe ndapota tarisa
kune www.z-wave.info.

Product Description

Iyo Wink Door/Window Sensor ndeye Z-Wave Plus bhatiri-powered mudziyo unoona kana gonhi, hwindo, kana kabhiti yakavhurwa nekuvharwa mumba mako, ichikubatsira kutarisa zviitiko zvakatenderedza imba yako kuchengetedza mhuri yako. Inoshanda nemagonhi ekunze nemukati, magonhi egaraji, magonhi epapatio, mahwindo, makabati, madhirowa, uye kumwe kuvhurika. Kana sensor yako yaona chiitiko, yako Wink Hub kana imwe Z-Wave Plus certified hub inogona kutumira yambiro kune yako smartphone, kudzima alarm kana chime, kana kukonzeresa otomatiki senge kubatidza mwenje wako. Iyo Wink Door/Window Sensor inopa yakawedzera-yakareba z-wave isina waya renji inosvika 150 tsoka, uye inoda Wink Hub kana imwe Z-Wave Plus yakasimbiswa hub yekushanda. Iyo Wink Door / Window sensor inouya neCR14250 bhatiri uye ine makore matatu ehupenyu hwebhatiri, uye inotumira yambiro kune yako smartphone kuburikidza nehubhu kana mudziyo une bhatiri rakaderera. Z-Wave Plus Certified Inoda Z-Wave Plus Certified Hub kuti ishandiseInoshanda neZ-Wave Plus inofambirana networkKusvika 150 tsoka kurengerengerwa Kwemakore Matatu Battery Hupenyu (CR14250 Bhatiri rinosanganisirwa)Low Bhatiri Chiratidzo Zviyero mumamilimita: 19 x 66.3 mm (20.2 mm) uye 10 x 39.55 x 10.5 mm (magineti)

Gadzirira Kuisa / Reset

Ndapota verenga bhuku rekushandisa usati waisa chigadzirwa.

Kuti ubatanidze (wedzera) mudziyo weZ-Wave kune network inofanira kunge iri mufekitari default
state. Ndokumbirawo muve nechokwadi chekuseta zvakare mudziyo mufekitari default. Unogona kuita izvi ne
kuita basa reKusabatanidzwa sezvinotsanangurwa pazasi mubhuku rekushandisa. Yese Z-Wave
controller inokwanisa kuita oparesheni iyi asi zvinokurudzirwa kushandisa yekutanga
mutongi weiyo yapfuura network kuti ave nechokwadi chekuti mudziyo wacho hauna kubatanidzwa nemazvo
kubva kune network iyi.

Dzorera kufekitari default

Ichi chishandiso chinobvumirawo kusetwa patsva pasina kubatanidzwa kweZ-Wave controller. Izvi
nzira inofanirwa kushandiswa chete kana iyo yekutanga controller isingashande.

Kana zvichidikanwa, iyo Door/Window Sensor inogona kumisikidzwa munharaunda nekutevera matanho aya. Ita izvi chete kana Z-Wave controller yako yakabviswa kana neimwe nzira isingasvikike. Chenjerera kuti kuseta zvakare mudziyo wako unoibvisa kubva kuhurongwa:1. Bvisa SENSOR COVER uye simbisa kuti Door/Window Sensor yako yakabatidzwa.2. Dzvanya uye bata BUTTON kweinenge 10 seconds wobva waregedza. Chiedza chinopenya chinoratidza kugadziridzwa kwefekitori kwakabudirira.3. Iyo Door/Window Sensors ndangariro ichadzimwa kune zvigadziriso zvefekitori.

Kubatanidzwa/Kusabatanidzwa

Pafekitori default mudziyo hausi weZ-Wave network. Chishandiso chinoda
kuva yakawedzerwa kune iripo isina waya network kutaurirana nemidziyo yetiweki iyi.
Iyi nzira inodaidzwa Kubatanidzwa.

Midziyo inogona zvakare kubviswa kubva kunetiweki. Iyi nzira inodaidzwa Kusabatanidzwa.
Maitiro ese ari maviri anotangwa neyekutanga controller yeZ-Wave network. Izvi
controller inoshandurwa kuita yekusabatanidzwa inoenderana inclusion mode. Kubatanidzwa uye Kusabatanidzwa ndiko
obva aita kuita yakakosha yemanyorero chiito pamudziyo.

Kubatanidzwa

Tevedzera mirairo kune yako Z-Wave certified Controller kuti uise inclusion mode.Kana uchikurudzirwa neMutungamiriri:1. Kuti ubatanidzwe kwakakodzera, hunza iyo Door/Window Sensor mukati mechikamu cheMutungamiriri wako.2. Dhonza bhatiri tebhu kuseri kwe sensor kuti ibatise, kana kubvisa wozoisazve mabhatiri. Chiedza che LED chinofanira kupenya.

Kusabatanidzwa

Tevedza mirairo yeZ-Wave yako yakasimbiswa Controller kuti uise kusarudzika modhi. Paunokurudzirwa neMutungamiriri:1. Dzvanya bhatani rekuburitsa kavha ye sensor kuti ubvise kavha yepamusoro, uye iva nechokwadi chekuti sensor inobatidzwa pa.2. Dzvanya Bhatani reBatanidza padyo nebhatiri nekukurumidza katatu mumutsara.Chiratidzo che LED chinopenya kashanu chichiratidza kusabatanidzwa/kubviswa.

Kukurukurirana kumudziyo wekurara (Wakeup)

Chishandiso ichi chinoshandiswa nebhatiri uye chinoshandurwa kuita hope dzakadzika nguva zhinji
kuchengetedza hupenyu hwebhatiri nguva. Kukurukurirana nemudziyo kunogumira. Kuti uzo
kutaurirana nemudziyo, static controller C inodiwa mumambure.
Mutongi uyu anochengetedza bhokisi retsamba remidziyo inoshandiswa nebhatiri uye chitoro
mirairo isingagamuchirwe panguva yehope huru. Pasina mutongi akadaro,
kutaurirana kunogona kuve kusingaite uye / kana hupenyu hwebhatiri nguva yakanyanya
yakaderera.

Chishandiso ichi chinomuka nguva nenguva uye kuzivisa kumuka
state nekutumira inonzi Wakeup Notification. Mutongi anogona ipapo
bvisa bhokisi retsamba. Nokudaro, chigadziro chinoda kugadziriswa nezvinodiwa
nguva yekumuka uye node ID yemutongi. Kana mudziyo wakabatanidzwa ne
a static controller uyu controller anowanzo kuita zvese zvinodiwa
configurations. Nguva yekumuka ndeye tradeoff pakati pemaximal bhatiri
nguva yehupenyu uye mhinduro dzinodiwa dzechigadzirwa. Kuti umutse mudziyo ndapota ita
chiito chinotevera:

Nekuti iyo Door/Window Sensor chishandiso chine bhatiri, inomuka nguva nenguva kuti ipe bhatiri uye zvimwe zvigadziriso zvemamiriro kune controller, pamwe nekugamuchira zvigadziriso kubva kumutongi (kusiyana nekugara uchingogara online uye kudhiza bhatiri rayo. .) Chishandiso chinogona kumanikidzwa kumuka (kutumira mishumo iyi kana kugamuchira marongero matsva nekukasira) nekungodzvanya uye kubata BUTTON kwemasekonzi maviri.

Kukurumidza dambudziko kupfura

Heano mashoma mazano ekuisa network kana zvinhu zvikasashanda sezvaitarisirwa.

1. Ita shuwa kuti mudziyo uri mufekitori reset mamiriro usati wasanganisira. Mukupokana usabvisa pamberi sanganisira.
2. Kana kusanganisirwa kuchiri kutadza, tarisa kana zvese zvishandiso zvinoshandisa ma frequency akafanana.
3. Bvisa zvese zvakafa kubva kumasonganiro. Zvikasadaro uchaona kunonoka kwakanyanya.
4. Usamboshandisa bhatiri midziyo yekurara isina yepakati controller.
5. Usavhote FLIRS zvishandiso.
6. Ita shuwa kuti une yakakwana mains powered mudziyo kuti ubatsirwe kubva kune meshing

Kushamwaridzana - imwe mudziyo inodzora imwe mudziyo

Z-Wave zvishandiso zvinodzora zvimwe Z-Wave zvishandiso. Ukama pakati pemudziyo mumwe
kudzora mumwe mudziyo kunonzi kushamwaridzana. Kuti udzore zvakasiyana
mudziyo, mudziyo unodzora unofanirwa kuchengetedza runyoro rwemidziyo inogashira
kudzora mirairo. Aya mazita anonzi mapoka ekubatana uye anogara aripo
zvine chekuita nezvimwe zviitiko (semuenzaniso bhatani rakadzvanywa, sensor trigger, ...). Zvikazo
chiitiko chinoitika ese maturusi akachengetwa muboka rekubatana achaita
gamuchira imwechete isina waya yekuraira isina waya, kazhinji iyo 'Basic Set' Command.

Mapoka eMasangano:

Nhamba YebokaMaximum NodesDescription

1	5	Boka 1 iboka reLifeline, rinogona kubata nhengo shanu, kazhinji kusanganisira iyo huru Z-Wave controller. Iyo Door/Window Sensor inotumira boka iri Notification Report uye Binary Sensor Report kana yakavhurwa kana kuvharwa. Inotumirawo boka iri Chirevo cheBattery mukupindura kumirairo yeBattery Get.
2	5	Iyo Door/Window Sensor inotumira Yekutanga Set kuraira kushamwaridzana Boka 2 (kana iyo Kudzora Boka) kukonzeresa zvakananga zvishandiso (semwenje, chime, nezvimwewo) mukupindura kune zviitiko. Zvadaro, mushure menguva yakatarwa, murairo weBASIC_SET(0x00) unotumirwa kugadzirisa zvakare mudziyo (semuenzaniso kudzima mwenje.) Kukosha kweiyo Basic Set command (semuenzaniso kupenya kwe l.amp,) uye nguva yekunonoka isati yatumirwa BASIC_SET(0x00) inogadziriswa uchishandisa zvigadziriso zvekugadzirisa 1 uye 2 zvakateerana.
3	5	Boka 3 rinotsigira nhengo dzinosvika 5 uye Door/Window Sensor inotumira NOTIFICATION_REPORT kana gonhi richivhurwa kana kuvharwa.
4	5	Boka 4 rinotsigira nhengo dzinosvika 5 uye Door/Window Sensor inotumira SENSOR_BINARY_REPORT kana gonhi richivhurwa kana kuvharwa.

Configuration Parameters

Z-Wave zvigadzirwa zvinofanirwa kushanda kunze kwebhokisi mushure mekuiswa, zvisinei
kumwe kugadziridzwa kunogona kugadzirisa basa zvirinani kune zvinodiwa nemushandisi kana kuvhura mberi
kuvandudzwa maitiro.

ZVINOKOSHA: Vadzori vanogona chete kubvumidza kugadzirisa
dzakasaina tsika. Kuti uise kukosha muhuwandu 128 ... 255 kukosha kwakatumirwa mukati
chikumbiro chichava kukosha kunodiwa kubvisa 256. For example: Kuisa a
parameter kusvika 200  ingangodiwa kuseta kukosha kwe200 minus 256 = minus 56.
Kana iri mbiri yebhayiti kukosha kwakafanana kunoshanda: Values ​​yakakura kupfuura 32768 inogona
inoda kupihwa sehunhu husina kunaka zvakare.

Parameter 1: BASIC_SET Off Kunonoka

Iyi parameter inoseta nguva yekunonoka kubva painotumira Door/Window Sensor inotumira BASIC_SET command kuAssociation Group 2 uye kana BASIC_SET(0) yatumirwa. Inogamuchira kukosha kusvika pa65535, mumasekondi.
Saizi: 2 Byte, Default Value: 30

SettingDescription

1-65535

mumasekonzi

Parameter 2: BASIC_SET Level

Iyi parameter inoisa kukosha kwakatumirwa neBASIC_SET murairo kuAssociation Group 2 (kuti uwane rumwe ruzivo, ona Mapoka eMasangano.)
Saizi: 1 Byte, Default Value: 99

SettingDescription

0	Off/Cancel Alarm/Etc.
1-99	Dim Level (yeMultilevel Switch)
255	Batidza (yeBinary Switch)

Technical Data

Hardware Platform	ZM5202
Device Type	Chiziviso Sensor
Network Kushanda	Kushuma Muranda Akarara
Firmware Shanduro	HW: 65 FW: 3.61
Z-Wave Vhezheni	6.51.06
Chitupa ID	ZC10-17075685
Z-Wave Chigadzirwa Id	0x017F.0x0100.0x0001
Tsika Dzakatsigirwa Marudzi	Access Control
Sensors	Vhura/Kuvharwa (Bhinary)
Color	Chena
Frequency	XXfrequency
Maximum transmission simba	XXantenna

Inotsigirwa Command Classes

• Sangano Grp Info
• Sangano V2
• Bhatiri
• Configuration
• Device Reset Local
• Manufacturer Specific
• Chiziviso V4
• Powerlevel
• Sensor Binary V2
• Shanduro V2
• Muka V2
• Zvaveplus Info V2

Controlled Command Classes

• Basic

Tsanangudzo yeZ-Wave chaiyo mazwi

• Controller - iri Z-Wave mudziyo une kugona kubata network.
  Ma controller anowanzo magedhi, Remote Controls kana bhatiri rinoshandiswa madziro controller.
• Muranda - iri Z-Wave chishandiso chisina kugona kubata network.
  Varanda vanogona kunge vari masensa, actuators uye kunyange kure kure.
• Primary Controller - ndiye murongi wepakati wetiweki. Zvinofanira kuva
  controller. Panogona kuve nemutongi mumwe chete wekutanga muZ-Wave network.
• Kubatanidzwa - ndiyo maitiro ekuwedzera michina mitsva yeZ-Wave mune network.
• Kusabatanidzwa - ndiyo maitiro ekubvisa Z-Wave zvishandiso kubva kunetiweki.
• Kushamwaridzana - hukama hwekutonga pakati pemudziyo unodzora uye
  mudziyo unodzorwa.
• Wakeup Chiziviso -imeseji yakakosha isina waya yakapihwa neZ-Wave
  mudziyo wekuzivisa unokwanisa kutaura.
• Node Information Frame -imeseji yakakosha isina waya inoburitswa nea
  Z-Wave mudziyo kuzivisa kugona kwayo uye mabasa.