SMARTRISE VERSION 1.03 C4 LINK2 PROGRAMMER

Zvinotsanangurwa

• Product Name: C4 Link2 Programmer
• Shanduro: 1.03
• Date: Mbudzi 7, 2025

Overview

• Gwaro iri rinopa nhanho-ne-nhanho mirairo yekurodha, kuisa, uye kushandisa iyo Link2 Programmer ine C4 controllers. Inotsanangura nzira yekuisa software paC4 controller uchishandisa Link2 Programmer.

Zvinodiwa Zvishandiso zveSoftware Programming

Zvishandiso zvinotevera zvinodiwa kuronga software:

1. Laptop ine Windows-based operating system.
2. Iyo Link2 Programmer.
3. Controller software: The original controller software is stored on a flash drive inside the white job binder. If the flash drive is missing or contains outdated prints and software, Smartrise can provide a weblink yekuwana yazvino software nemaprints.

Application Download Instructions

Kurodha software paSmartrise controller, iyo programming application inofanirwa kudhaunirodwa kune laptop. Ichi chishandiso chinowanikwa pane flash drive. Tevedza nhanho idzi kurodha C4 Link2 Programmer application:

1. Vhura flash drive.
2. Navigate to (5) – Smartrise Programs and open the folder.
3. Tsvaga uye vhura iyo C4 Programmer folda.
4. Dhawunirodha uye mhanyisa ese maapplication palaptop. Mamwe malaptop anogona kunge aine firewall inodzivirira maapplication kubva kudhanilodha. Kuti uwane rubatsiro, bata system administrator.
5. Kana yapera, zvikumbiro zviviri izvi zvinofanirwa kuoneka padesktop.
   CHERECHEDZA: MCUXpresso haidi kuvhurwa, inongoiswa palaptop.

Software Loading Instruction

Kuti ive nechokwadi chekushanda kwakaringana, iyo controller software inofanirwa kurodha paSmartrise controller uchishandisa Link2 Programmer. Tevera matanho ari pasi apa kuti upedze hurongwa:

1. Batanidza iyo Link2 Programmer kune laptop kuburikidza ne USB port.
2. Vhura iyo C4 Link2 Programmer nekudzvanya kaviri icon yayo. Iyo application inozozvigadziridza kune yazvino vhezheni kana yakabatana neinternet. Ita shuwa kuti application yacho ndeyemazuva ano usati waenderera.
3. Bhurawuza iyo controller software:
   • Vhura (1) - Controller Software.
   • Sarudza folda ine zita rebasa.
   • Sarudza Mota yekurodha software.
   • Dzvanya Sarudza Folder pazasi pehwindo.
4. Sarudza processor yekuvandudza uchishandisa menyu yekudonha. Ma processor anogona kuvandudzwa mune chero kurongeka:
   • MR A: MR MCUA
   • MR B: MR MCUB
   • SRU A: CT uye COP MCUA
   • SRU B: CT uye COP MCUB
   • Riser/Kuwedzera: Riser/Expansion board
   • Ma processor akabatanidzwa anogona kuwanikwa pabhodhi.
5. Tanga iyo software yekurodha maitiro nekudzvanya bhatani rekutanga.
   • Zvakakosha: Paunenge uchigadzira MR SRU, dzimwe mota dziri muboka dzinogona kukanganiswa. Kuti udzivise izvi, bvisa materminals eboka pabhodhi.
6. Hwindo idzva richaonekwa, uye software yekurodha ichatanga. Kana yapera, meseji yekusimbisa icharatidzwa.CHERECHEDZA: Kana software ikatadza kurodha, edza zvinotevera:
   • Edzazve maitiro.
   • Shandisa imwe USB port yakasiyana.
   • Simba kutenderera mutongi.
   • Ita shuwa kuti Link2 Programmer yakabatana nemazvo.
   • Tangazve laptop.
   • Edza imwe Link2 Programmer.
   • Shandisa imwe laptop.
   • Bata Smartrise kuti ubatsirwe.
7. Dzvanya Rongedza kuti uenderere mberi nekurodha software kune asara ma processor uye tevera matanho apfuura.
8. Kana zvese zvekukwidzwa kwesoftware zvapera, batanidzazve materminal eboka uye kutenderera kwemagetsi mutongi.
9. Simbisa iyo software vhezheni pasi peMain Menu | About | Vers.
10. Bhura pasi ku view sarudzo dzese uye simbisa iyo inotarisirwa vhezheni inoratidzwa.
    • ZITA REBASA
    • SRU BOARD
    • CAR LABEL
    • JOB ID: ########
    • VERS. ##.##.##
    • © 2023 SMARTRISE
11. Default to factory settings by navigating to Main Menu | Setup | Miscellaneous | Default | Default Factory.

Restoring a Bricked Processor

In the event of a bricked processor, follow the steps below to restore functionality:

1. Locate the two jumpers positioned beneath the LCD display – one jumper corresponds to each processor.
2. Connect the jumper associated with the affected (bricked) processor to establish communication.
3. Power cycle the board.
4. Once power is restored, program the processor using a release file that already includes a bootloader.
5. Start the application once programming is complete.
6. Remove the jumper used for recovery.
7. Power cycle the board again to finalize the restoration.

FAQs

Q: What should I do if I encounter issues with downloading the programming application?

A: If you face problems downloading the programming application due to firewalls or other reasons, contact your system administrator for assistance.

Zvinyorwa / Zvishandiso

SMARTRISE VERSION 1.03 C4 LINK2 PROGRAMMER [pdf] Bhuku reMushandisi VERSION 1.03 C4 LINK2 PROGRAMMER, VERSION 1.03, C4 LINK2 PROGRAMMER, LINK2 PROGRAMMER, PROGRAMMER

References

• User Manual