MOXA EDS-G500E Series EtherDevice Switch Installation Guide

Package Checklist

Iyo EDS-G500E inotumirwa nezvinhu zvinotevera. Kana chimwe chezvinhu izvi chisipo kana kukuvadzwa, tapota taura nemumiririri webasa revatengi vako kuti ubatsirwe.

• 1 EDS-G508E kana EDS-G512E-4GSFP kana EDS-G516E-4GSFP Ethernet switch
• Kurumidza kuisa gwaro (rakadhindwa)
• Warranty card
• USB tambo
• Zvivharo zvivharo zvezviteshi zvisina kushandiswa

Features

• Kusvika gumi nemaviri 12/10/100BaseT(X) zviteshi uye 1000 4/100BaseSFP zviteshi
• Turbo Ring uye Turbo Chain (nguva yekudzoreredza <50 ms @ 250 switch), RSTP/STP, uye MSTP yetiweki redundancy
• RADIUS, TACACS+, SNMPv3, IEEE 802.1x, HTTPS, uye SSH kusimudzira kuchengetedzwa kwetiweki.
• EtherNet/IP, PROFINET, uye Modbus/TCP mapuroteni anotsigirwa manejimendi uye kutarisa mudziyo.

Panel Views yeEDS-G500E Series

Front Panel 

1. 1000BaseT (X) LED chiratidzo
2. 10/100BaseT (X) LED chiratidzo
3. 10/100/1000BaseT (X) zviteshi
   EDS-G508E: 1 kusvika 8
   EDS-G512E-4GSFP: 1 kusvika 8
   EDS-G516E-4GSFP: 1 kusvika 12
4. Sistimu mamiriro e LED:
   1. STATE LED chiratidzo
   2. PWR1 LED chiratidzo
   3. PWR2 LED chiratidzo
   4. FAULT LED chiratidzo
   5. MSTR/HEAD LED chiratidzo
   6. CPLR/TAIL LED chiratidzo
5. USB chiteshi chekuchengetedza
6. SFP port LED chiratidzo
   EDS-G512E-4GSFP: 9 kusvika 12
   EDS-G516E-4GSFP: 13 kusvika 16
7. 100/1000BaseSFP slots
8. Model Name

Top Panel

1. Reset bhatani
2. USB console port
3. DIP inoshandura yeTurbo Ring,
   Ring Master, uye Ring Coupler
4. Grounding screw
5. 4-pini terminal block yekupinza yedhijitari uye simba rekuisa 2
6. 4-pini terminal block ye relay kubuda uye simba rekuisa 1

Rear Panel 

1. Maburi maburi emadziro anoisa kit
2. DIN-njanji yekumisikidza kit

Mounting Dimensions

Chikamu = mm (inch)

DIN-Rail Kukwira

Iyo simbi yeDIN-rail kit inogadziriswa kuseri kwepaneli yeEDS-G500E yakatevedzana paunoibvisa mubhokisi. Mount iyo EDS-G500E yakatevedzana pane corrosion-isina kukwira njanji inosangana neEN 60715 yakajairwa.

Installation

CHECHITATU: Isa muromo wepamusoro weDIN njanji muDIN-njanji inokwira kit.
STEP 2: Dzvanya iyo EDS-G500E yakatevedzana yakananga kuDIN njanji kusvika yapinda panzvimbo.

Kubviswa

STEP 1: Dhonza pasi latch pakiti inokwirisa ine screwdriver.
STEP 2 & 3: Dhonza zvishoma EDS-G500E yakatevedzana mberi uye simudza kumusoro kuti uibvise kubva kuDIN njanji.

ATTENTION

1. Midziyo iyi midziyo yakavhurika-mhando inofanirwa kuiswa muvharivha ine mudziyo unobvisika kavha kana musuwo unokodzera nharaunda.
2. Mudziyo uyu wakakodzera kushandiswa muKirasi I, Chikamu 2, Mapoka A, B, C, uye D kana nzvimbo dzisina njodzi chete.

Kukwirisa madziro (Sarudzo)

Kune mamwe maapplication, iwe unozviwana zviri nyore kukwira Moxa EDSG500E akatevedzana pamadziro, sezvinoratidzwa mumifananidzo inotevera:

STEP 1: Bvisa aluminium DIN rail attachment plate kubva kuseri kweEDS-G500E series, wobva wabatanidza madziro ekumisikidza mahwendefa ane M3 screws, sezvinoratidzwa pamufananidzo uri kurudyi.

STEP 2: Kuisa iyo EDS-G500E yakatevedzana pamadziro inoda 4 screws. Shandisa EDS-G500E yakatevedzana, ine madziro ekumisikidza mahwendefa akabatanidzwa, segwara rekumaka nzvimbo dzakafanira dzechina screws. Misoro yezvikwiriso inofanira kunge isingasviki 4 mm muhupamhi, uye shafts inofanira kuva isingasviki 6.0 mm muhupamhi, sezvinoratidzwa mumufananidzo uri kurudyi.

CHERECHEDZA Usati wasimbisa screws mumadziro, ita shuwa kuti musoro wescrew uye shank size yakakodzera nekuisa sikuru kuburikidza neimwe yemakona-yakaita buri-apertures eWall Mounting Plates.

Usapenengura ma screws munzira yese - siya anenge 2 mm kuti ape nzvimbo yekutsvedza madziro emadziro pakati pemadziro nema screws.

STEP 3: Kana ma screws aiswa kumadziro, isa misoro ina screw kuburikidza nenzvimbo dzakafara dzemakiyi-shaped apertures, wobva watsveta EDS-G500E pasi, sezvakaratidzwa mumufananidzo uri kurudyi. Simbisa ma screws kuti uwedzere kugadzikana.

YAMBIRO

1. KUPUPUTSA HAZARD - Usabvisa midziyo kunze kwekunge simba rabviswa kana nzvimbo ichizivikanwa kuti haina ngozi.
2. NJODZI YEKUPUPUTSA - Kutsiva chero zvikamu zvinogona kukanganisa kukodzera kweKirasi I, Chikamu 2.
3. KURATIDZWA KUNE MAMWE MAKEMIKARI ZVINOGONA KUDZIDZISA ZVINHU ZVINHU ZVAKASIMWA ZVINHU ZVINHU ZVINOSHANDISWA MUCHINHU.

Nhoroondo ye ATEX 

1. Nhamba yechitupa: DEMKO 14 ATEX 1212X
2. Certification tambo: Ex nA nC IIC T4 Gc
3. Mitemo yakavharwa:
   EN 60079-0:2012+A11:2013, EN 60079-15:2010
4. Zvigadzirwa izvi zvinofanirwa kuiswa muATEX Certified IP54 enclosure uye zvinongowanikwa chete nekushandisa chishandiso.
5. Zvigadzirwa izvi ndezvekushandiswa munzvimbo isingapfuuri dhigirii rekusvibisa 2 zvinoenderana neIEC 60664-1.

Wiring Zvinodiwa

YAMBIRO

Usabvisa ma modules kana waya kunze kwekunge simba radzimwa kana nzvimbo ichizivikanwa kuti haina ngozi. Midziyo yacho inogona kunge yakabatana chete neiyo voltage inoratidzwa pane type plate. Iwo maturusi akagadzirirwa kushanda ane Safety Extra-Low Voltage. Saka, ivo vanogona chete kubatanidzwa kune voltage zvinongedzo uye kune iyo chiratidzo chekusangana neiyo Safety Extra-Low Voltages (SELV) maererano neIEC950/ EN60950/ VDE0805.

ATTENTION
Ichi chikwata imhando yakavakirwa-mukati. Kana iyo unit yaiswa mune chimwe chidimbu chemidziyo, midziyo yakavharira iyo unit inofanirwa kutevedzera moto wakavharirwa mutemo IEC 60950 / EN60950 (kana mutemo wakafanana).

ATTENTION
Chengetedzo Kutanga!
Iva nechokwadi chekubvisa tambo yemagetsi usati waisa uye / kana wiring yako Moxa Ether Device Switch. Verenga iyo yakawanda inogoneka ikozvino mune yega yega waya yemagetsi uye yakajairika waya. Tarisa macode ese emagetsi achiraira iyo yakanyanya ikozvino inotenderwa kune yega saizi waya. Kana iyo yazvino ichikwira pamusoro peyepamusoro ratings, iyo wiring inogona kupisa, zvichikonzera kukuvadza kwakanyanya kumidziyo yako.

Ndapota verenga uye tevera mazano aya: 

• Shandisa nzira dzakasiyana dzekufambisa wiring kune simba nemidziyo. Kana simba wiring uye mudziyo wiring nzira dzinofanira kuyambuka, ita shuwa kuti waya dziri perpendicular panzvimbo yemharadzano.
  CHERECHEDZA: Usamhanye siginecha kana kutaurirana wiring uye wiring yemagetsi kuburikidza newaya imwe chete conduit. Kuti udzivise kupindira, waya dzine zviratidzo zvakasiyana-siyana dzinofanirwa kuendeswa zvakasiyana
• Iwe unogona kushandisa rudzi rwechiratidzo chinofambiswa kuburikidza newaya kuona kuti ndedzipi waya dzinofanirwa kuchengetwa dzakaparadzana. Mutemo wechigunwe ndewekuti wiring inogovera maitiro emagetsi akafanana anogona kuunganidzwa pamwechete
• Iwe unofanirwa kuparadzanisa wiring yekupinza kubva kune inobuda wiring
• Isu tinopa zano kuti iwe unyore iyo wiring kune ese maturusi ari muhurongwa.

Kudzika iyo Moxa EDS-G500E Series

Kudzika pasi uye waya routing kunobatsira kudzikisira mhedzisiro yeruzha nekuda kwekukanganiswa kwemagetsi (EMI). Mhanya chinongedzo chepasi kubva pasiruu yepasi kusvika panzvimbo yepasi usati wabatanidza zvishandiso.

ATTENTION

Ichi chigadzirwa chakagadzirirwa kukwidziridzwa kune yakadzika-ivhu yekumisikidza senge simbi panel.

Wiring iyo Relay Contact

Iyo EDS-G500E yakatevedzana ine imwe seti yekuburitsa relay. Iyi relay yekubata inoshandisa maviri anobatika eiyo terminal block pane EDS-G500E's top panel. Tarisa kune chikamu chinotevera kune yakadzama mirayiridzo yekuti ungabatanidza sei waya kune terminal block yekubatanidza, uye maitiro ekubatanidza iyo terminal block yekubatanidza kune terminal block receptor. Muchikamu chino, tinotaridza zvinorehwa nemazita maviri anoshandiswa kubatanidza relay contact.

MHOSVA:
Iwo maviri anobatika e6-pini terminal block yekubatanidza anoshandiswa kuona zviitiko zvakagadziriswa nemushandisi. Idzo waya mbiri dzakanamirwa kune dzakakanganisa dzinoumba dunhu rakavhurika kana mushandisi-yakagadziriswa chiitiko chinotangwa. Kana chiitiko chemushandisi-chakagadziriswa chisingaiti, dunhu remhosva rinoramba rakavharwa.

Wiring the Redundant Power Inputs 

Iyo EDS-G500E yakatevedzana ine maseti maviri emagetsi ekuisa-simba rekuisa 1 uye simba rekuisa 2. Kumusoro nekumberi. views yeimwe yeterminal block yekubatanidza inoratidzwa pano.

STEP 1: Isa iyo yakaipa / yakanaka DC waya muV-/V+ zviteshi, zvichiteerana.

STEP 2: Kuchengetedza waya dzeDC kuti dzisadhonze, shandisa diki-blade screwdriver kuomesa waya-cl.amp screws pamberi peiyo terminal block connector.

STEP 3: Isai epurasitiki terminal block connector prongs mune terminal block receptor, iyo iri pane EDS-G500E's top panel.

Wiring iyo Digital Inputs

Iyo EDS-G500E yakatevedzana ine imwe seti yedhijitari yekupinda (DI). Iyo DI ine maviri anobatika eiyo 4-pini terminal block yekubatanidza pane EDS-G500E's yepamusoro panhi, ayo anoshandiswa kune maviri maDC ekuisa. Pamusoro uye mberi views yeimwe yeterminal block yekubatanidza inoratidzwa pano.

CHECHITATU: Isa iyo isina kunaka (pasi)/yakanaka DI waya mu ┴/I zviteshi, zvichiteerana.

CHECHITATU: Kuchengetedza waya dzeDI kuti dzisadhonze, shandisa diki-blade screwdriver kuomesa waya-cl.amp screws pamberi peiyo terminal block connector.

STEP 3: Isai epurasitiki terminal block connector prongs mune terminal block receptor, iyo iri pane EDS-G500E's top panel.

Kukurukurirana Connections

Imwe neimwe EDS-G500E yakatevedzana switch ine 4 mhando dzekutaurirana ports:

• 1 USB console port (mhando B yekubatanidza)
• 1 USB chiteshi chekuchengetedza (mhando A yekubatanidza)
• 8 (EDS-G508E/EDS-G512E-4GSFP) kana 12 (EDS-G516E-4GSFP) 10/100/1000BaseT(X) Ethernet ports
• 4 100/1000Base SFP slots (EDS-G512E-4GSFP/EDS-G516E-4GSFP)

USB Console Connection

Iyo EDS-G500E yakatevedzana ine imwe USB console port (mhando B yekubatanidza), iri pamusoro pepaneru. Shandisa tambo ye USB (yakapihwa mupakiti yechigadzirwa) kubatanidza EDS-G500E's console port kune PC yako USB port uye isa USB mutyairi paPC. Iwe unogona ipapo kushandisa console terminal chirongwa, senge Moxa PCm Terminal Emulator, kuti uwane iyo EDS-G500E's console kumisikidza utility.

USB Console Port (Type B Connector) Pinouts 

Pin	Tsanangudzo
1	D– (Data -)
2	VCC (+5V)
3	D+ (Data+)
4	GND (Pasi)

USB Storage Connection

Iyo EDS-G500E yakatevedzana ine imwe USB yekuchengetera chiteshi (mhando A yekubatanidza) pane yekumberi panhi. Shandisa Moxa ABC-02-USB-T otomatiki backup configurator kubatanidza EDS-G500E's USB yekuchengetera chiteshi chekugadzirisa, kukwidziridza firmware kana system log. file backup.

ABC-02-USB Kuiswa
Batanidza iyo ABC-02-USB muUSB yekuchengetera chiteshi cheMoxa EDS-G500E akatevedzana. Kuchengetedza iyo ABC-02-USB pamadziro neM4 screw inokurudzirwa.

USB Storage Port (Type A Connector) Pinouts 

Pin	Tsanangudzo
1	VCC (+5V)
2	D– (Data -)
3	D+ (Data+)
4	GND (Pasi)

1000BaseT Ethernet Port Connection 

1000BaseT data inofambiswa pane musiyano TRD+/- siginecha pairi pamusoro pewaya dzemhangura.

MDI/MDI-X Port Pinouts 

Pin	Signal
1	TRD(0)+
2	TRD(0)-
3	TRD(1)+
4	TRD(2)+
5	TRD(2)-
6	TRD(1)-
7	TRD(3)+
8	TRD(3)-

100/1000BaseSFP (mini-GBIC) Fiber Port

Gigabit Ethernet ports paEDS-G500E series ndeye 100/1000BaseSFP Fiber ports, inoda kushandisa 100M kana 1G mini-GBIC fiber transceivers kuti ishande nemazvo. Moxa inopa akapedzwa transceiver modhi kune akasiyana chinhambwe chinodiwa.

Pfungwa iri kuseri kweLC port uye tambo yakatwasuka. Ngatiti iwe uri kubatanidza zvishandiso I uye II; zvinopesana nemagetsi emagetsi, zviratidzo zvemaziso hazvidi dunhu kuitira kutumira data. Nekuda kweizvozvo, imwe yemitsara yekuona inoshandiswa kuendesa data kubva kune mudziyo I kuenda kumudziyo II, uye imwe mutsara wekuona unoshandiswa kuendesa data kubva kune mudziyo II kuenda kune mudziyo I, kune yakazara-duplex kutapurirana.

Rangarira kubatanidza Tx (kutumira) chiteshi chemudziyo I kune Rx (gashira) chiteshi chemudziyo II, uye Rx (gashira) chiteshi chemudziyo I kune Tx (kutumira) chiteshi chemudziyo II. Kana iwe ukagadzira tambo yako, tinokurudzira kunyora mativi maviri emutsara mumwechete nemavara akafanana (A-to-A uye B-ku-B, sezvaratidzwa pazasi, kana A1-ku-A2 uye B1-ku-B2 )

LC-Port Pinouts
LC-Port kuenda kuLC-Port Cable Wiring 

ATTENTION
Ichi ndicho Kirasi 1 Laser / LED chigadzirwa. Kuti udzivise kukonzera kukuvadza kwakakomba pameso ako, usatarise zvakananga muLaser Beam.

Reset Bhatani

Pane mabasa maviri anowanikwa paReset Button. Imwe ndeyekugadzirisa zvakare Ethernet switch kune fekitori default marongero nekudzvanya uye kubata iyo
Reset bhatani kwemasekonzi mashanu. Shandisa chinhu chakanongedza, senge bepa rakatwasuka clip kana toothpick, kudzvanya bhatani reReset. Izvi zvichaita kuti STATE LED ibwaire kamwe chete sekondi. Mushure mekudzvanya bhatani kwemasekonzi mashanu anoenderera, iyo STATE LED inotanga kubwaira nekukasira. Izvi zvinoratidza kuti zvigadziriso zvefekitori zvakatakurwa uye unogona kusunungura bhatani reset.

Kana iyo ABC-02-USB yakabatana neiyo EDS-G500E Ethernet switch, bhatani reseta rinobvumira kukurumidza kumisikidzwa uye neback up log. files kuABC-02-USB. Dzvanya bhatani reReset pamusoro peEDS-G500E, switch yeEthernet ichatanga kutsigira ikozvino sisitimu yekumisikidza. files uye matanda echiitiko kuABC-02-USB

CHERECHEDZA Usatore magetsi kubva paEthernet switch kana uchinge uchinge uchinge uchinge uchinge uchinge uchinge uchinge uchinge uchinge uchinge uchinge uchinge uchinge wakaita.

Turbo Ring DIP Switch Settings 

EDS-G500E series are plug-and-play managed redundant Ethernet switches. The proprietary Turbo Ring protocol was developed by Moxa to provide better network reliability and faster recovery time. Moxa Turbo Ring’s recovery time is less than 300 ms (Turbo Ring) or 50 ms (Turbo Ring V2) —compared to a 3- to 5-minute recovery time for commercial switches—decreasing kurasikirwa kunokwanisika kunokonzerwa nekutadza kwetiweki munzvimbo yeindasitiri.

Kune 4 Hardware DIP Swichi yeTurbo Ring pane yepamusoro peneru yeEDS-G500E yakatevedzana inogona kubatsira kuseta iyo Turbo Ring zviri nyore mukati memasekonzi. Kana iwe usingade kushandisa hardware DIP chinja kuseta iyo Turbo Ring, unogona kushandisa a web browser, telnet, kana console kudzima basa iri.

CHERECHEDZA Ndokumbira utarise chikamu cheTurbo Ring muKukurukurirana Redundancy Mushandisi Manual kuti uwane rumwe ruzivo nezve kuseta uye kushandiswa kweTurbo Ring uye Turbo Mhete V2.

EDS-G500E Series DIP Swichi 

Iyo yekumisikidza yekuseta yega yega DIP Shandura YAKOMA. Tafura inotevera inotsanangura mhedzisiro yekuseta iyo DIP Shandura kune iyo ON chinzvimbo.

"Turbo Ring" DIP Switch Settings 

DIP 1	DIP 2	DIP 3	DIP 4
Reserved for	ON: Inogonesa izvi	ON: Inogonesa iyo	ON: Inomutsa
kushandiswa mune ramangwana.	EDS seRing	default "Ring	DIP chinja 2 uye
	Tenzi.	Coupling" zviteshi.	3 kugadzirisa
			"Turbo Ring"
			zvirongwa.
	DZIMA: EDS iyi	DZIMA: Usashandise	DZIMA: DIP chinja
	hazvizovi	iyi EDS seyo	1, 2, uye 3 zvichava
	Ring Master.	ring coupler.	kuremara.

"Turbo Ring V2" DIP Switch Settings 

DIP 1	DIP 2	DIP 3	DIP 4
ON: Inogonesa iyo default "Ring Coupling (backup)" chiteshi kana DIP switch 3 yatove enabled.	ON: Inogonesa iyi EDS seRing Master.	ON: Inogonesa iyo default "Ring Coupling" port.	ON: Inomisikidza DIP switch 1, 2, uye 3 kugadzirisa "Turbo Ring V2" marongero.
DZIMA: Inogonesa iyo default "Ring Coupling (yekutanga)" chiteshi kana DIP switch 3 yatogoneswa.	DZIMA: Iyi EDS haizove iyo Ring Master.	DZIMA: Usashandise iyi EDS semhete coupler.	DZIMA: DIP chinja 1, 2, uye 3 ichavharwa.

CHERECHEDZA Iwe unofanirwa kugonesa iyo Turbo Ring basa kutanga usati washandisa DIP switch kuti uite iyo Master uye Coupler mabasa.

CHERECHEDZA Kana iwe ukasagonesa chero eEDS-G500E akatevedzana switch kuti ive Ring Master, iyo Turbo Ring protocol inongosarudza iyo EDS-G500E yakatevedzana ine diki kero yeMAC kero kuti ive Ring Master. Kana ukaita netsaona kugonesa inodarika imwe EDS-G500E nhevedzano kuti ive Ring Master, aya EDS-G500E akateedzana switch anozotaurirana otomatiki kuti aone kuti ndiani angave Ring Master.

LED Indicators

Iyo yekumberi pani yeMoxa EDS-G500E yakatevedzana ine akati wandei ma LED zviratidzo. Basa re LED yega yega rinotsanangurwa mune inotevera tafura:

LED	Color	Status	Tsanangudzo
STATE	Girinhi	On	Iyo sisitimu yakapfuura iyo yekuzviongorora bvunzo paboot-up uye yakagadzirira kumhanya.
		Kubwaira	Iyo switch iri pasi pekugadzirisazve kufambira mberi (1 nguva/s Wona ABC-02-USB batanidza kune switch (1 nguva/2s).
	Tsvuku	On	Iyo sisitimu yakatadza kuzviongorora pa boot-up. RAM Kuedza Kukundikana / Sisitimu Ruzivo. Verenga Kukundikana / Kuchinja Kwekutanga Kukundikana / PTP PHY Kanganiso. (+ Green MSTR yakabatidzwa pa: HW FAIL) FW Checksum Kukundikana / Kusamanikidzwa Kukundikana. (+ Green Coupler yakabatidzwa pa: SW FAIL)
MHOSVA	Tsvuku	On	Mucherechedzo wekusangana wakavhurika. ABC Loading/Saving Fail. Chiteshi chiri kuvharwa nekuda kweiyo ingress multicast uye nhepfenyuro mapaketi anodarika ingress rate inogumira. Kubatana kwe loop kusiri iko mune imwe switch. Kubatana pachiteshi cheRing hakusiko.
PWR1	Amber	On	Simba ririkupihwa kune main module's power input PWR1.
		Off	Simba harisi kupihwa kune main module's power input PWR1.
PWR2	Amber	On	Simba ririkupihwa kune main module's power input PWR2.
		Off	Simba harisi kupihwa kune main module's power input PWR2.

LED	Color	Status	Tsanangudzo
MSTR/ MUSORO	Girinhi	On	Iyo switch inogadzwa saTenzi weTurbo Ring, seMusoro weTurbo Chain, kana seRot bhiriji reRSTP. POST HW Fail (+Stat on uye Fault blinking).
		Kubwaira	Iyo switch yave Ring Master yeTurbo Ring. Musoro weTurbo Chain, mushure mekunge Turbo Ring kana Turbo Chain yadzika. Iyo switch inogadzika seNhengo yeTurbo Chain uye chiteshi chetani chinowirirana chiri pasi.
		Off	Iyo switch haisi Tenzi weiyi Turbo Ring. Iyi switch inoiswa seNhengo yeTurbo Chain.
CPLR/ SIZE	Girinhi	On	Iyo switch yekubatanidza basa inogoneswa kugadzira nzira yekudzosera kumashure. Kana yaiswa seMuswe weTurbo Chain. POST SW Yakundikana (+Stat on uye Kutadza kubwaira)
		Kubwaira	Turbo Chain iri pasi. Iyo switch inogadzika seNhengo yeTurbo Chain uye chiteshi chetani chinowirirana chiri pasi.
		Off	Switch iyi yadzima basa rekubatanidza. Iyi switch inoiswa seNhengo yeTurbo Chain.
MHOSVA + MSTR/MUSORO + CPLR/TAIL		Tenderedza Blinking Sequentially	ABC-02-USB iri kuunza/kutumira kunze files.
STATE + FAULT + MSTR/MUSORO + CPLR/TAIL		Kubwaira	Kuchinja kuri kuwanikwa/kunowanikwa naMXview (2 nguva/s).
10M / 100M (TP)	Amber	On	TP port's 10 kana 100 Mbps link iri kushanda.
		Kubwaira	Data iri kufambiswa pa10 kana 100 Mbps.
		Off	TP port's 10/100 Mbps link haisi kushanda.
1000M (TP)	Girinhi	On	TP port's 1000 Mbps link iri kushanda.
		Kubwaira	Data iri kufambiswa pa1000 Mbps.
		Off	TP port's 1000 Mbps link haisi kushanda.
100M (SFP)	Amber	On	SFP port's 100 Mbps link iri kushanda.
		Kubwaira	Data iri kufambiswa pa100 Mbps.
		Off	SFP port's 100 Mbps link haishande.
1000M (SFP)	Girinhi	On	SFP port's 1000 Mbps link iri kushanda.
		Kubwaira	Data iri kufambiswa pa1000 Mbps.
		Off	SFP port's 1000 Mbps link haishande.

Zvinotsanangurwa

Vadivelu Comedy Technology
Mitemo	IEEE 802.3 ye10BaseT IEEE 802.3u ye100BaseT(X) uye 100BaseFX IEEE 802.3ab ye1000BaseT(X) IEEE 802.3z ye1000BaseX
Protocols	IGMPv1/v2/v3, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 66/67/82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SSH, Syslog, EtherNet/IP, PROFINET, Modbus/TCP, SNMP Inform, LLDP, IEEE 1588 PTP V2, IPv6, NTP Server/Client
MIB	MIB-II, Ethernet-Senge MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Boka 1, 2, 3, 9
Kudzora Kuyerera	IEEE 802.3x kudzora kuyerera, kumashure kudzvinyirira kuyerera kutonga
Interface
RJ45 Ports	8 (EDS-G508E/EDS-G512E-4GSFP) kana 12 (EDS-G516E-4GSFP) 10/100/1000BaseT(X)
Fiber Zviteshi	4-chiteshi 100/1000BaseSFP slot (EDS-G512E-4GSFP/EDS-G516-4GSFP chete)
USB Ports	USB console port (mhando B yekubatanidza) USB yekuchengetera chiteshi (mhando A yekubatanidza)
Bhatani	Reset bhatani
LED Indicators	PWR1, PWR2, MHOSVA, STATE, 10/100M, 100/1000M, MSTR/MUSORO, CPLR/MUSE
Alarm Contact	1 relay kubuda neazvino kutakura kugona kwe1 A @24 VDC
Dhijitari Inzwa	1 yekupinda nevhu rakafanana, asi rakaparadzaniswa nemagetsi kubva kune zvemagetsi.  +13 kusvika +30V yedunhu "1" -30 kusvika +3V yehurumende "0" Max. kupinza ikozvino: 8 mA
Simba
Chiyamuro Voltage	12/24/48/-48 VDC, redundant dual inputs
Input Current	EDS-G516E: 0.46 A @ 24 VDC EDS-G512E: 0.4 A @ 24 VDC EDS-G508E: 0.33 A @ 24 VDC
Connection	2 inobviswa 4-inobata terminal blocks
Overload Current Dziviriro	Present
Reverse Polarity Dziviriro	Present
Hunhu Hwenyama
Housing	Metal, IP30 kudzivirira
Dimension	79.2 x 135 x 137 mm (3.1 x 5.3 x 5.4 mukati)
Installation	DIN-njanji yekumisikidza, kumisa madziro (ine sarudzo kit)

Environmental Limits
Kushanda Tembiricha	-10 kusvika 60°C (14 kusvika 140°F) yemhando dzemhando -40 kusvika 75°C (-40 kusvika 167°F) ye -T mhando
Storage Tembiricha	-40 kusvika 85°C (-40 kusvika 185°F)
Ambient Relative Humidity	5 kusvika 95% (isina-condensing)
Altitude	Kusvika ku2000 m
Ongorora: Ndokumbira ubate Moxa kana iwe uchida zvigadzirwa zvakavimbiswa kushanda zvakanaka pakakwirira.
Regulatory Approvals
Safety	UL 508
EMI	FCC Chikamu 15 Chikamu B Kirasi A, EN 55022 Kirasi A
EMS	EN 61000-4-2 (ESD) Chikamu chechina, EN 61000-4-3 (RS) Chikamu 3, EN 61000-4-4 (EFT) Chikamu chechina, EN 61000-4-5 (Surge) Chikamu chechina, EN 61000-4-6 (CS) Chikamu 3, EN 61000-4-8
Shock	IEC 60068-2-27
Free Fall	IEC 60068-2-32
Vibration	IEC 60068-2-6
Warranty
Warranty	5 years

 

Zvinyorwa / Zvishandiso

MOXA EDS-G500E Series EtherDevice Switch [pdf] Installation Guide EDS-G500E Series EtherDevice Switch, EDS-G500E Series, EtherDevice Switch

References

• User Manual