Moonwind mk II Analog Filter Tracker

Product Information

Zvinotsanangurwa

• Product Name: Moonwind mk II
• Type: Analog Filter Tracker
• Manhanho ekupinda: Kubva pamagitare asina kusimba masaini kusvika kune yakakwira studio mutsetse mazinga e +20dBu
• Output Level Range: Inochinjika kubva - kusvika kunenge max. +20 dBu
• Cutoff Frequency Range: 16Hz-ca. 35kHz
• Resonance Range: 0 kusvika pakukwirira kwekugona-oscillation kugona

Mirayiridzo Yekushandiswa Kwechigadzirwa

Single Mode

1. Mushure mekuibatidza, iyo Moonwind MK II iri mune Imwe modhi uye iyo huru menyu (nekukurumidza edit mode).
2. Iyo sefa uye mhedzisiro processor inoshanda sebhangi resefa uye inogona kugadziridzwa yakanangana uchishandisa rotary knobs.
3. Imwe neimwe shanduko yakaitwa inonzwika nekukurumidza uye inogona kuchengetwa ipapo ipapo.

Kudzora Pamusoroview

• WANA: Rongedza kupinza kuwana kudzivirira Peak LED kubva pakuvhenekera kumusoro.
• DRY/WET: Dzora musanganiswa pakati pechiratidzo chakananga uye huwandu hwekuita.
• VOLUME: Gadzirisa chikamu chekubuda.
• CUTOFF & Q: Dzora cutoff frequency uye firita narrowness zvichiteerana.
• RES: Gadzirisa resonance yefirita yekugona-self-oscillation.

MIDI Basa

• MIDI mu: Inogamuchira MIDI data
• MIDI Kunze: Inoendesa MIDI data kune imwe MIDI-inokwanisa mudziyo.
• MIDI Kubva: Bypass MIDI data kune imwe MIDI-inokwanisa mudziyo pasina shanduko.

Kugadzirisa Sequencer

1. Dzvanya iyo SINGLE/SEQ bhatani kuti uchinje pakati peimwe modhi uye sequencer modhi.
2. Shandisa mana asingaperi encoder kugadzirisa akasiyana siyana anoenderana neakasarudzwa modhi.

Mibvunzo Inowanzo bvunzwa (FAQ)

Mubvunzo: Chii chinangwa cheEncoder 1-4 paMoonwind mk II?

• A: Iwo encoder anoshandiswa kugadzirisa akasiyana ma paramita anoenderana neakasarudzwa modhi, senge sefa yekuseta kana FX paramita mukukurumidza edit mode.

Mubvunzo: Ndinochinja sei pakati peIngle uye Sequence modhi paMoonwind MK II?

• A: Dzvanya bhatani SINGLE/SEQ kushandura pakati pemamodhi maviri.

Single Presets

• Mushure mekubatidza, iyo Moonwind MK II yapinda
• Single mode uye mune huru menyu kureva
• kukurumidza kugadzirisa mode.
• Iyo sefa uye mhedzisiro processor ikozvino inoshanda senge sefa yebhangi uye inogona kugadziridzwa zvakananga neinotenderera mapfundo.
• Shanduko imwe neimwe inonzwika pakarepo uye inogona kuchengetwa ipapo ipapo.

SINGLE/SEQ

• Iri bhatani rinochinja pakati peimwe modhi uye kutevedzana modhi. Mune imwechete modhi, iyo Moonwind MK II inoshanda seyakamira sefa bhangi.

CHEKA

• Iyi knob inodzora cutoff (kona) frequency yesefa. Zvinoenderana nechimiro chesefa, iwe unoshandura zvakakosha zvimiro zvesefa uye neruzha rwayo.
• Iyo huwandu hunoenda kubva ku16Hz-ca. 35kHz uye nekudaro inovhara iyo yese audio renji.
• Mwedzi Mhepo MK II ine mafirita maviri akafanana. Naizvozvo divi rimwe chete ndiro rinotsanangurwa zvakadzama pano nekuti matatu, ari mugonyo akarongwa maknob Cutoff, Q, uye Res ane basa rimwechete pasefa yega yega.

Encoder

Encoder 1-4

• Kuruboshwe kweOLED kuratidzwa, mana asingaperi encoder anogona kugadzirisa akasiyana siyana anoenderana neakasarudzwa modhi.
• Zvikamu zvina zvinofanirwa kuchinjwa pamapeji ese emenyu. Aya akawedzera mapfumo anotenderera anogara achishanda zvine chekuita neparameter yakasarudzwa uye anowedzera nekufamba kwewachi uye achidzikira nekutenderera kwewachi.
• Mukukurumidza kugadzirisa maitiro, iwo encoders anogadzirisa iyo 4 FX paramita zvakananga.

Noise

• Dzvanya bhatani reNOISE uye menyu inovhura:
• Iwe unogona kusarudza pano kana chena kana simbi ruzha rwakadyiswa mumhepo yemwedzi MK II sefa kana kwete. Kune mamwe ekuedza ruzha maapplication, izvi zvinogona kubatsira zvakanyanya.
• Mwedzi Mhepo MK II inobuda kuita izere ruzha mugadziri.
• Noise = 001 inogadzira ruzha ruchena. Pamusoro peiyo metallic ruzha patani ibhinari chirongwa chakatorwa kubva kune ruzha kukosha.
• Hapana chakafanana, uye une mhando hombe dzesimbi dzeruzha mapatani ekuongorora. Zvimwe zvacho zvinoti tonal, zvimwe zvine ruzha uye zvine ruzha. Iyo yakakwirira iyo nhamba, iyo yakanyanya kuoma iyo inodzokororwa chiratidzo cheruzha chinogona kuva.

Ruzha Vhoriyamu

• Ruzha rwakasanganiswa neyekuyerera kwechiratidzo chikuru chinogona kudzorwa vhoriyamu pano.

Midhi

Midi In

• Iyi jack inoshanda kudzora iyo Moonwind MK II neimwe Midi inokwanisa mudziyo, semuenzaniso nyoro- kana hardware sequencer, controller bhokisi, Jomox Alpha Base, kana zvakafanana.
• Iyo moonwind mk II iri kugadzirisa midi noti mirairo. Ose FIL uye VCA hamvuropu inokonzeresa. Manotsi anodzora kucheka kwemasefa ese ari maviri. Nhamba yenoti yakayerwa nenzira yekuti nemasefa ega-resonating anenge emimhanzi semitones anosangana - zvisinei, mafirita modes haana kumbobvira akanyatsoita seVCO ye synth. Iyo pitch inosiyana neQ uye resonance huwandu uye iyo logarithmic kuyera haina kukwana futi. Ndiani anotarisira pano synthesizer ine yakakwana tuning ichaodzwa mwoyo - iyi ianalog sefa bhangi uye kwete synth.

Midi Out

• Inoshanda kutumira Midi data kubva kumwedzi mhepo mk II kuenda kune imwe Midi inokwanisa mudziyo, semuenzaniso nyoro- kana hardware sequencer, kuchinjanisa data.

Midi Thru

• Inoshanda kudarika Midi data kubva kuMoonwind MK II kuenda kune imwe Midi-inokwanisa mudziyo. Iwo anouya Midi mameseji anopfuudzwa nehardware kuenda kuMidi Thru port pasina shanduko.

Kugadzirisa Sequencer

• Dzvanya bhatani SINGLE/SEQ. Kana iyo Moonwind MK II yaive mune yekukurumidza dhiza skrini yeimwe modhi zvisati zvaitika, iyo inoratidzira inochinja kune sequencer modhi izvozvi.

Iyo imwechete preset inokurumidza skrini inoramba iri muchiratidziro:

• Mabhawa ezvikwiriso zvakasiyana-siyana anomiririra kukosha kweiyo cutoff (kana imwe parameter) iyo inoridzwa kumashure pamatanho ekutevedzana.
• Kunze kwekucheka, iyo sequencer inogona kurekodha uye kutamba zvakare Q uye resonance zvakare.

START

• Inotanga sequencer. Zvisinei neiyo Imwe / Seq modhi iyo sequencer inomhanya uye inoratidza nhanho dzakaridzwa nekupenya kweKutanga LED. Iwe unogona kuramba uchifambisa cutoff knobs uye kuwedzera yakatsiga cutoff kukosha kune iyo inoteedzana.

MIRA

• Inomisa sequencer.

RECORD

• Inomisikidza kurekodha chaiko kweCutoff/Q/Res knobs mafambiro apo sequencer iri kushanda.
• Iwe unogona kuona shanduko dzakarekodhwa sebar graph chete kana iwe uri mu sequencer mode. Ne UNDO/EXIT unogona kudzoreredza kusvika ku1000 nhanho dzekugadzirisa.
• Rekodhi inogona kungoitwa chete kana iyo sequencer iri kutamba. Iyo tsvuku LED padivi pebhatani inovhenekera.
• Kudzvanya bhatani zvakare kunosiya rekodhi modhi.

Kugadzirisa Sequences kuburikidza neTouchpad

• Enda kuSequence Danho Rongedza Modhi nekudzvanya STEP, uye unogona kufambisa chitubu ne touchpad uye wochinja mabhawa ekutevedza nekufamba kumusoro/pasi nemunwe wako.
• Kaviri-kubata pafiripi pakati pekuruboshwe nekurudyi kutevedzana.

GAIN

• Inodzora kuwanda kwekupinza. Iyo Moonwind MK II inogona kugadzirisa ingangoita chero nhanho yekuisa, kubva kune isina simba gitare masiginecha kusvika kune yakakwira studio mutsetse mazinga e +20dBu.
• Ndokumbira ugadzirise kuwana kuitira kuti Peak LED yakavakidzana ichangovhenekera parizvino.

KUOMA / WET

• Inodzora musanganiswa pakati pechiratidzo chakananga uye huwandu hwemhedzisiro. Yakatenderedzwa yakazara kuruboshwe chiratidzo chekubuda chakaenzana nechiratidzo chekuisa pasina mhedzisiro (bypass), yakatendeuka zvizere wachi unowana iyo yakachena mhedzisiro chiratidzo.

VOLUME

• Inodzora chikamu chekubuda. Izvo zvinobuda hazvina kuenzana uye zvinochinjika kubva -∞ kusvika kunenge max. +20 dBu.

Q

• Iyo Q (Q = mhando) inogadzirisa hutete hwesefa. Kukosha kwepamusoro kunotungamira kune nosy sefa kugadziridzwa, diki kune Broadband inorira sefa.
• PaResonance = 0, iyo sefa haizozvimisikidzi asi panzvimbo pacho inove yakatetepa zvakanyanya kana Q iri pakakwirira.

RES

• Inogadzirisa ruzha rwesefa. Kupokana kune mamwe akawanda mafirita emoonwind mk II ane akasiyana marongero eQ uye Resonance.
• Ne resonance, iyo sefa inokwanisa kuzvidzora-oscillate uye inogona kuburitsa yakagadzikana sine oscillation pane cutoff frequency. Kuti izvi zviitike, Q inofanirwa kusetwa yakakwira kupfuura zero zvakare.

Kubata Mode

• Paunenge uri muSingle Mode, bata kaviri pane touchpad, uye munguva pfupi "Bata Mode On" ichave inokurudzirwa muchiratidziro.
• Iyo skrini inobuda uye dot rinotevera chigunwe chako pachiratidziro. Muhafu yekurudyi yechidzitiro, iwe unodzora kuchekwa kwekurudyi nekurudyi-kuruboshwe kufamba uye iyo Q / Resonance nekumusoro / pasi mafambiro.
• Hafu yekuruboshwe inoshanda kune yekuruboshwe sefa iri mhiri kwakatarisana nezve cutoff.
• Izvo zvinoita kuti mafirita aite tweet uye aridze muridzo pamunwe wako, uye iwe unogona kuridza zvinonzwika sefa.

Kurekodha Sequences kuburikidza neTouchpad

• Kana iwe uchida kurekodha, ingotanga iyo sequencer, uye paunongobata touchpad, kurekodha kunotanga otomatiki. Mafambiro ese anonyorwa musequencer. Kunakidzwa!

LFO

• Dzvanya LFO1 kana LFO2.
• NeLFO (Low Frequency Oscillator) unogona kugadzira inonakidza modulations yeiyo cutoff. Zvishoma nezvishoma kusimuka uye kupera kwesefa kutsvaira kusvika tonal vibratos zvinogoneka.
• Nhamba huru ye64 waveforms ndeyesarudzo yako.
• Kana mafirita ari mu-self-resonance, unogona kugadzira modulated sine mafungu ane maLFO anorangarira mahombe modular masisitimu.
• Kushandura chiyero pamusoro pe127 inoshandura Midi wachi sync kune maLFOs.

LFO sync modes

FIL Envelope / VCA Envelopu

• Dzvanya ENV.
• Iyo moonwind mkII ine sefa uye envelopu yeVCA inogona kukonzereswa nechiitiko chemidi noti. Chinyorwa chekutanga chinovhura mahamvuropu uye chinyorwa chekupedzisira chakaburitswa chinoburitsa hamvuropu pamakodhi anoridzwa.
• Saka iwe unogona kushandisa iyo Moonwind mkII seruzha synthesizer kana synth kusimudzira uye wedzera analog sefa kune yako synth kana iwe ukateedzera nzira kuburikidza neMwedziWind mkII uye shandisa zvakafanana midi manotsi.
• Kudzvanya ENV zvakare kunochinja pakati peFIL neVCA envelopu.

• Iwe unogona kugadzirisa yakajairwa ADSR paramita Attack, Kuora, Sustain, uye Released neiyo 4 encoder. Iwo magirafu ari nyore anotevera maitiro.
• Ndokumbira utarise kuti chiratidziro chete chine mutsara asi kwete chiratidzo chemuviri chinogadzirisa iyo CV. Zviri classic exponential.
• Nekuda kwekureruka inodhirowa nemitsetse yakatwasuka.

Sefa Envelope

• Iyo envelopu yekusefa inoshanda pane ese mafirita, asi iyo modulation huwandu hunogona kusiyana kune yega sefa.

VCA envelope

• Iyo VCA hamvuropu inodzora ruzha rwekukwirisa kwekupedzisira VCA (Voltage Kudzorwa Amplifier). Ndapota cherechedza kuti izvi zvinopindirana zvakasimba neparameter VCAm (VCA Amount).
• Kana VCAm iri zero, hamvuropu chete ndiyo inogona kuvhura VCA uye moonwind mkII yakanyarara kana pasina midi manotsi anoshanda.
• Kana VCAm yakavhurwa ku127, envelope yeVCA haina chekuita. Huwandu huri pakati ngahurege chiratidzo chipfuure uye wedzera kadiki VCA ruzha curve.
• Default-huchenjeri kukosha uku kunovhurwa zvizere nekuti iyo moonwind mkII inoshanda seyakamira sefa pakutanga.

SHAPE L/ SHAPER

• Iri bhatani rinoshandura iyo Shape (fomu) kuseta yeruboshwe kana kurudyi sefa. Nekuidzvanya zvakare zvimiro zvina zvakasiyana pinda mukati. Iwo anoratidzwa muOLED. Pane marongero mana:

Lp (Low Pass)

• Chete yakaderera frequency kusvika kune cutoff (kona) frequency inopfuudzwa. Iwo trebles ari kudimburwa.
• Iri bhatani rinoshandura iyo Shape (fomu) kuseta yeruboshwe kana kurudyi sefa. Nekuidzvanya zvakare zvimiro zvina zvakasiyana pinda mukati. Iwo anoratidzwa muOLED. Pane marongero mana:

Lp (Low Pass)

• Chete yakaderera frequency kusvika kune cutoff (kona) frequency inopfuudzwa. Iwo trebles ari kudimburwa.

Hp (High Pass)

• Iwo chete ma frequency epamusoro pasi kune cutoff frequency anopfuudzwa. The low frequency vari kugurwa.

Bp (Band Pass)

• Mafrequency chete ari mukati mebhendi yekupfuura akatenderedza cutoff frequency anopfuudzwa. Iyo yakakwirira uye yakaderera frequency iri kugurwa.

Nt (Notch)

• Ese ma frequency kunze kwekumisa bhendi yakatenderedza cutoff frequency inopfuudzwa. Iyo bhendi yakatenderedza cutoff frequency inotemwa.

Preset Selection

• Nekutendeutsa iyo DATA encoder unogona kuyeuka huwandu hwe256 preprogrammed ruzha - vashoma vavo mafekitori preset.
• Nhamba uye zita zvinoratidzwa pakupuruzira.
• Nekudzvanya pane DATA knob iyo yakasarudzwa preset inotakurwa.
• Nzira yechipiri yekusarudza presets ndeyekukwira kana kudzika nemabhatani eKumusoro/Kudzika.
• Iye zvino haufanirwe kurodha preset, inotakura otomatiki.

Migumisiro Chirongwa

• Dzvanya ALG.
• Iyo mhedzisiro processor yeSPIN semiconductor inopa 7 isingachinjike ROM zvirongwa uye 8 algorithms inogadziridzwa kuburikidza neOS, iyo inoita huwandu hwegumi neshanu emhedzisiro zvirongwa pamwe nechirongwa chekuyedza pasina basa.
• Vanogona kusarudzwa mumwe mushure meumwe.
• Papeji rino, unogona kusarudza chirongwa chekuita neiyo DATA encoder kana mabhatani eKumusoro/Kudzika.
• Nekuti iyo mitatu iripo Fx paramita ine chirevo chakasiyana kune yega Fx chirongwa, kukosha kwavo tsananguro inochinja yega yega yega yega algorithm.

FX Feedback

• Nekukosha uku, iwe unoshandura mhinduro yeFX. Kana zvirongwa zvekunonoka zvikaitwa, unogona kugadzira kunonoka kwematepi uye ping-pong echoes, sezvo iyo sefa inobuda ichidzoserwa zvakafanana uye chiratidzo chinopepetwa zvishoma nekumhanya-kwega kwega.
• Iwe unofanirwa kuyedza nechero FX chirongwa kuti uwane yaunoda mhedzisiro sezvo yega algorithm inopindirana zvakasiyana neanalogi mhinduro.
• Chenjerera: kana FX Feedback ikanyungudutswa inogona kuerekana yaguma nemhinduro yakasimba kana zvimwe zvirongwa zveFX zvasarudzwa zvingaite sezvinotyisa!

CV Zvabuda

• CV OUT kuruboshwe uye kurudyi kwemukati cutoff CV. Kana iwe uchida kushandisa yemukati cutoff kutevedzana kudzora yekunze mudziyo (semuenzaniso VCO kana imwe sefa), batanidza pano.
• Iyo CV inotevera ese emukati mafirita modulations anosanganisira sequencer, FIL Envelopu, uye maLFO. Kubuda 0-5 Volts.

DEMA L CV IN

• CUT L = Kuruboshwe
• Inowedzera CV kune yemukati cutoff yeruboshwe sefa. Saka iwe unogona kugadzirisa modulations kana uchida.
• Iyi yekunze CV haikanganise iyo yemukati CV kugadzirisa uye inoshanda chete pane hardware sefa inobuda.
• Iyo CUT L inogona kushandiswa nemaCVs asina kunaka zvakare, kubva -5V kusvika +5V.

DAI R CV IN

• CUT R = Right cutoff
• Inowedzera CV kune yemukati cutoff yerudyi sefa. Inoshanda zvakafanana neCUT L pamusoro.

VCA CV IN

• VCA = yekupedzisira VCA (Voltage Kudzorwa Ampkuchenesa)
• Iyi jack ine switching function: unplugged iyo VCA yakavhurika zvizere uye iri pasi pekutonga kweMoonwind mkII OS, uye nekukurumidza plug yaiswa iyo VCA inongotevera yakashandiswa CV.
• 0 Volt CV = VCA yakavharwa uye hapana chiratidzo chinobuda. 5 Volt CV = VCA yakavhurika zvizere uye chiratidzo chinopfuura.

Programmable CV IN

• Matanhatu eCV ekuisa jacks akarongwa mumakoramu maviri.
• Iyo L (kuruboshwe) inogadzirisa iyo kuruboshwe mafirita paramita uye vice-versa yeR (kurudyi) column. Kunze kwemafirita ane hukama neparamita, mamwe ma paramita anogona kufambiswa kubva kumativi ese.

CV Input Routing Parameters

• Iwe unofanirwa kudzvanya SET L kana SET R kuronga mabasa.
• Pakupinza kweCV yega yega, une parameter yainoenda nayo uye chiyero chinobva pa0..127. Kana iyo mari iri> 0 uye CV inoshandiswa kune iyo jack, bar inooneka, uye nhamba yeCV jack.
• Kureba kwebhari kunomiririra CV voltage inopetwa nehuwandu, kureva kudzika kwemodulation yenzvimbo yekuenda.

Zvinyorwa / Zvishandiso

Moonwind mk II Analog Filter Tracker [pdf] User Manual mk II Analog Sefa Tracker, mk II, Analogi Sefa Tracker, Sefa Tracker, Tracker

References

• User Manual