microsonic mic+25/DD/TC Mic+ Ultrasonic Sensors ine Maviri Kuchinja Kubuda
Product Description
Iyo mic + sensor ndeye ultrasonic sensor ine maviri ekuchinja anobuda. Inoshandiswa pakusaonana kwekuona zvinhu. Iyo sensor ine bofu zone umo kuyerwa kwechinhambwe hakugoneki. Iyo inoshanda renji inoratidza chinhambwe che sensor inogona kuiswa neyakajairwa maratidziro ane yakakwana basa rekuchengetedza. Zvinhu zvinotora zvine simba (semuenzaniso furo repurasitiki) kana kutaridza ruzha (semuenzaniso matombo ehurungudo) zvinogonawo kuderedza huwandu hwekushanda hwakatsanangurwa.
chigadzirwa Safety Notes
Verenga mirairo yekushanda usati watanga-up. Kubatanidza, kuisa, uye kugadzirisa mabasa anogona chete kuitwa nenyanzvi vashandi. Hapana chekuchengetedza chikamu zvinoenderana neEU Machine Directive, kushandiswa munzvimbo yekuzvidzivirira uye yemuchina haibvumidzwe.
chigadzirwa Kushandisa Kwakakodzera
Iyo mic + ultrasonic sensors inoshandiswa kune isiri-yekuona kuona kwezvinhu. Masensor anofanirwa kushandiswa nevashandi vehunyanzvi chete.
Measuring Range
Iyo mic + sensors ine 3-manhamba LED-kuratidza LED D1 uye D2 yekuseta switching inobuda D1 uye D2. Iwo masensa ane push-mabhatani T1 uye T2 yekuseta yekuona chinhambwe mumm kana masendimita.
chigadzirwa Synchronization
Kana madaro egungano anoratidzwa muFig. 1 kune maviri kana kupfuura sensors akapfuudzwa, kuwirirana kwakabatanidzwa kunofanira kushandiswa. Batanidza Sync/Comchannels (pini 5 panzvimbo yekugamuchira mayuniti) yeese masensor (gumi epamusoro).
chigadzirwa Maintenance
mic + sensors inoshanda kugadzirisa-isina. Hutsvina hudiki huri pamusoro hahukonzeri basa. Zvikamu zvakakora zvetsvina uye caked-pane tsvina zvinokanganisa sensor function uye saka zvinofanirwa kubviswa.
Kushandisa Mirayiridzo
- Verenga mirairo yekushanda usati watanga-up.
- Kubatanidza, kuisa, uye kugadzirisa mabasa anogona chete kuitwa nenyanzvi vashandi.
- Shandisa iyo mic + ultrasonic sensors yekuona-isina-kubata kuona kwezvinhu.
- Ita shuwa kuti zvinhu zvinonyudza zvine simba (senge furo repurasitiki) kana kuratidza ruzha (semuenzaniso matombo ehurungudo) zvinodziviswa sezvo zvichigona kudzikisira mashandiro akatsanangurwa.
- Shandisa iyo 3-manhamba LED-kuratidza LED D1 uye D2 kumisikidza switching inobuda D1 uye D2.
- Shandisa push-mabhatani T1 uye T2 kumisikidza kuona chinhambwe mumm kana masendimita.
- Kana madaro egungano anoratidzwa muFig. 1 kune maviri kana kupfuura sensors akapfuudzwa, shandisa kuwirirana kwakabatanidzwa. Batanidza Sync/Comchannels (pini 5 pane yekugamuchira unit) yeese ma sensors (gumi epamusoro).
- Ita shuwa kuti ma mic + sensors anochengetwa akachena kubva kune akakora mativi etsvina uye caked-patsvina kuchengetedza kushanda.
Operating Manual
mic + Ultrasonic Sensors ine maviri ekuchinja kubuda
- mic+25/DD/TC
- mic+25/EE/TC
- mic+35/DD/TC
- mic+35/EE/TC
- mic+130/DD/TC
- mic+130/EE/TC
- mic+340/DD/TC
- mic+340/EE/TC
- mic+600/DD/TC
- mic+600/EE/TC
Product Description
- Iyo mic + sensor ine maviri ekuchinja anobuda inoyera chinhambwe chechinhu chiri mukati meiyo yekuona nzvimbo isina kubatana. Zvichienderana neyakagadziridzwa yekuona kureba iyo switching inobuda yakaiswa.
- Zvese zvigadziriso zvinoitwa nemabhatani maviri-push uye matatu-manhamba e-LED-display (TouchControl).
- Matatu-mavara ma LED anoratidza mamiriro ekuchinja.
- Iwo anobuda mabasa anochinjika kubva kuNOC kuenda kuNCC.
- Iwo ma sensors anogadziriswa nemaoko kuburikidza neTouchControl kana kuburikidza neTeach-in maitiro.
- Anobatsira mamwe mabasa akaiswa muAdd-on-menu.
- Uchishandisa iyo LinkControl adapta (inosarudzika accessory) ese TouchControl uye yekuwedzera sensor parameter marongero anogona kugadziriswa neWindows® Software.
Safety Notes
- Verenga mirairo yekushanda usati watanga-up.
- Kubatanidza, kuisa uye kugadzirisa mabasa anogona chete kuitwa nenyanzvi vashandi.
- Hapana chekuchengetedza chikamu zvinoenderana neEU Machine Directive, kushandiswa munzvimbo yemunhu uye kudzivirira muchina hakubvumidzwe.
Kushandisa Kwakakodzera
mic + ultrasonic sensors inoshandiswa kune isiri-yekuona kuona kwezvinhu. Iyo mic + sensors ine bofu zone umo kuyerwa kwechinhambwe kusingagoneke. Iyo inoshanda renji inoratidza chinhambwe che sensor inogona kuiswa neyakajairwa maratidziro ane yakakwana basa rekuchengetedza. Paunenge uchishandisa zvakanaka zvinoratidzira, senge yakadzikama yemvura pamusoro, iyo sensor inogona zvakare kushandiswa kusvika kune yayo yakanyanya kuwanda. Zvinhu zvinotora zvine simba (semuenzaniso furo repurasitiki) kana kutaridza ruzha (semuenzaniso matombo ehurungudo) zvinogonawo kuderedza huwandu hwekushanda hwakatsanangurwa.
Synchronization
Kana madaro egungano anoratidzwa muFig. 1 kune maviri kana kupfuura sensors akapfuudzwa kuwiriranisa kwakabatanidzwa kunofanira kushandiswa. Batanidza Sync/Com-channels (pini 5 panzvimbo yekugamuchira mayuniti) yeese ma sensors (gumi epamusoro).
Mufananidzo 1: Gungano kureba, zvichiratidza kuwiriranisa/multiplex
Multiplex mode
Iyo yekuwedzera-pamenu inobvumira kugovera imwe kero »01« ku »10« kune yega sensor yakabatana kuburikidza neSync/Com-channel (Pin5). Iwo ma sensor anoita chiyero che ultrasonic sequentially kubva pasi kusvika pakakwirira kero. Naizvozvo chero pesvedzero pakati pema sensor inorambwa.
Kero »00« yakachengeterwa kuwiriranisa modhi uye inodzima iyo multiplex modhi. Kushandisa synchronized mode ese ma sensors anofanirwa kusetwa kuti ataure »00«.
Installation
- Unganidza sensor panzvimbo yekuisa.
- Batanidza tambo yekubatanidza kune M12 yekubatanidza, ona Fig.
- Mufananidzo 2: Pini basa ne view pa sensor plug uye coding yemavara yeiyo microsonic yekubatanidza tambo
Tanga
- Batanidza magetsi.
- Gadzirisa maparamendi e sensor nemaoko kuburikidza neTouchControl (ona Fig. 3 uye Dhiagiramu 1)
- kana kushandisa nzira yeDzidzisa-mukati kugadzirisa mapoinzi ekuona (ona Dhiagiramu 2).
Mufananidzo 3: TouchControl / LED kuratidza
Kuiswa kwefekitari
mic + sensors inounzwa fekitori-yakagadzirwa neanotevera marongero:
- Kuchinja zvinobuda paNOC
- Kuona kureba pakushanda siyana uye hafu yekushanda renji
- Chiyero chekuyeresa chakaiswa kuhuwandu hwehuwandu
Maintenance
mic + sensors inoshanda kugadzirisa mahara. Hutsvina hudiki huri pamusoro hahukonzeri basa. Zvikamu zvakakora zvetsvina uye caked-pane tsvina zvinokanganisa sensor function uye saka zvinofanirwa kubviswa.
Notes
- mic + sensors ine muripo wemukati wekushisa. Nekuda kwekuti ma sensors anodziya ega, muripo wetembiricha unosvika payakanyanya kushanda nzvimbo mushure me approx. Maminitsi makumi matatu ekushanda.
- Munguva yakajairika yekushanda modhi, yero ye LED inoratidza kuti switching inobuda yakabatana.
- Munguva yakajairika yekushanda maitiro, iyo yakayerwa nhanho kukosha inoratidzwa pa LED-chiratidzo mumm (kusvika 999 mm) kana masendimita (kubva pa100 cm). Scale inochinja otomatiki uye inoratidzwa nepoint iri pamusoro pemanhamba.
- Munguva yeDzidzisa-mu modhi, iyo hysteresis loops inodzoserwa kumashure kune fekitori marongero.
- Kana pasina zvinhu zvakaiswa mukati menzvimbo yekuona iyo LED-chiratidzo chinoratidza »– ––«.
- Kana pasina push-mabhatani anotsikirirwa kwemasekonzi makumi maviri panguva yekumisikidza paramende shanduko dzakaitwa dzinochengetwa uye sensor inodzokera kune yakajairika maitiro ekushandisa.
- Iyo sensor inogona kumisikidzwa kune yayo yekumisikidza fekitori, ona »Kiyi yekukiya uye fekitori kuseta«, Dhiagiramu 3.
Ratidza parameters - Mune yakajairika maitiro ekushandisa nekukurumidza sunda T1. Chiratidziro che LED chinoratidza »PAR.« Pese paunobaya-push-bhatani T1 iwo chaiwo marongero eanalog kubuda anoratidzwa.
Dhiagiramu 1: Seta ma sensor paramita nhamba uchishandisa LED kuratidza
Dhiagiramu 2: Seta sensor paramita kuburikidza ne Dzidzisa-mu maitiro
Dhiagiramu 3: Kiyi yekiyi uye kuseta fekitori
Dhiagiramu 4: Inobatsira mamwe mabasa muAdd-on menyu (yevashandisi vane ruzivo chete, zvigadziriso hazvidiwe kune zvakajairwa maapplication)
Technical data
microsonic GmbH / Phoenixseestraße 7 / 44263 Dortmund / Germany / T +49 231 975151-0 / F +49 231 975151-51 / E info@microsonic.de /W microsonic.de
Zviri mugwaro rino zvinoenderana nekuchinja kwehunyanzvi. Zvinotsanangurwa mugwaro iri zvinoratidzwa nenzira inotsanangura chete. Ivo havabvumire chero zvigadzirwa zvemhando. Enclosure Type 1 Yekushandisa chete mumaindasitiri muchina NFPA 79 application. Iwo epadhuze switch anozoshandiswa neYakanyorwa (CYJV/7) tambo/koninganisi gungano yakarongerwa kushoma 32 Vdc, shoma 290 mA, mukumisikidzwa kwekupedzisira. Kunyoresa nhamba. 75330-19 Yakatenderwa musi waChikumi 25, 2019
Zvinyorwa / Zvishandiso
 |
microsonic mic+25/DD/TC Mic+ Ultrasonic Sensors ine Maviri Kuchinja Kubuda [pdf] User Manual mic 25 DD TC Mic Ultrasonic Sensors ine Mabudiro Aviri Anochinja, mic 25 DD TC, Mic Ultrasonic Sensors ane Mabudiro Aviri Anochinja, Mabudiro Aviri Anochinja, Achichinja Mabudiro. |
