METCAL CV-5200 Connection Validation (CV) User Guide
NHUNGAMIDZO
Gwaro iri nderekuwedzera kuConnection Validation™ User Guide inovhara zvigadziriso uye zvinhu zvitsva zvinosanganisirwa mu2022 CV Firmware Upgrade.
Kuti uwane ruzivo rwakakwana pane system hardware uye software maficha, kuseta, tekinoroji maratidziro, uye CV mashandiro, tarisa kune Mushandisi Guide.
KUKAMUDZIRA KUNYANYA KUNYANYA FIRMWARE PANE YAKO CV SYSTEM
Kutora advantage yezvitsva zvezvino CV firmware kuburitswa, iwe uchafanirwa kugadzirisa firmware yako.
- Kuti uwane tsananguro yakapusa yeiyo firmware yekuvandudza maitiro, dhawunirodha gwaro "CV Firmware Update."
- Kuti uwane tsananguro yakazara yeiyo firmware update process, dhawunirodha gwaro iri "CV-5200 Firmware Update Loading Instructions."
CONNECTION VALIDATION™ MAIN SCREEN
Kuti usvike kune zvitsva zveCV maficha mune iyi kusimudzira, tinya iyo Settings/Setup icon.
KUGADZIRA SCREEN
Mazhinji emabasa makuru eConnection Validation™ system anodzorwa kuburikidza neSettings Screen.
Heino runyorwa rwezvinhu zvitsva:
- Cartridge Optimization System (Itsva)
- Nguva Yekubuda Settings (Itsva)
- Inobvumirwa Cartridge Settings (Yakagadziridzwa)
- Nguva yekurara (Yakagadziridzwa)
- Connection Validation™ Mode Settings (Itsva)
Isu tichapfuura nemabhatani muhurongwa hwavanooneka paSettings Screen kuti tinzwisise zvakajeka nezvekushanda kweCV.
CARTRIDGE OPTIMIZATION SYSTEM (ITSVA)
Nyowani kuCV-5200 iCartridge Optimization System yekunyatsoongorora katuriji uye kutema matanda, uye kunyatsoona chikumbaridzo chekurara.
Kuti uwane kunyatsoita kuita kubva kuConnection Validation™ system, zvinokurudzirwa kuti yega yega katuriji yako iiswe kuburikidza nemaitiro ekugadzirisa usati washandiswa.
Maitiro anorekodha chikamu checartridge (Standard, Ultrafine, kana High Thermal Demand) uye chiyero chetembiricha, uye nekukasira kuongorora kukanganiswa kwekaturiji yega yega kuti ipfuure ruzivo rwakakwana kuburikidza neCV system.
Kubatanidza ZANO-CARTRIDGE NECV SYSTEM
Kekutanga iyo nyowani yetip-cartridge mhando inopinzwa muhandpiece, iwe unozokurudzirwa kuti uise handpiece munzvimbo yekurara. Dzvanya mufananidzo weiyo solder stand paCV touchscreen. Nzira yekubatanidza inofanira kunge yakwana mumasekonzi mana kana pasi. Kana kubatanidza kwapera, hauzodi kubatanidza iyo cartridge zvakare.
TIME OUT SETTINGS (ZVITSVA)
Iyo Time Out Settings chidzitiro ndiko kwaunoseta iyo nguva-pa-pa-join yenguva yeTimed Mode. MuTimed Mode, mushandisi kana maneja wekuita anoseta nguva yakakodzera yekugara yejoini yega yega, zvichienderana nekushandiswa uye tembiricha yecartridge iri kushandiswa. Iyo CV system nguva imwe neimwe-pa-pa-joint uye inozivisa opareta kana vachifanira kubvisa solder tip voenderera mberi.
Hurefu hwenguva-pa-joint yakaiswa mukati mehuwandu hwe3 kusvika ku8 seconds (IPC Standard).
ZVINOBVUMIRWA ZVIGARO ZVINOGONESA (ZVIKAMUDZIDZWA)
Iyo CV sisitimu inopa maitiro mainjiniya kugona kugadzira runyorwa rweakatenderwa tip cartridges. Kana iyo Yakabvumidzwa Cartridge Settings yabatikana, chete ma cartridge ari pane iyo rondedzero achaita. Kusvika gumi nemaviri magadzirirwo emakaturiji anogona kuwedzerwa kune iyo rondedzero. Chero katuriji inopinzwa muhandpiece isiri parunyorwa inozounza mhosho.
Iine cartridge yakaiswa mukati mehandpiece, tinya iyo Inobvumirwa Cartridge Settings icon. Dzvanya bhatani re [+] kuti uwedzere CV cartridge pane iyo rondedzero. Iyo cartridge yakaiswa ichawedzerwa kune Inobvumidzwa runyorwa nechikamu chenhamba. Kana wapedza kuwedzera katuriji/nhamba dzechikamu, dzvanya chiratidzo chekiyi kuti ubatanidze runyoro, wobva wabuda pachiratidziri chekuseta. (Ona peji 11 yeBhuku reMushandisi kuti uwane mirairo yegadziriro yakakwana)
Inobvumirwa Cartridges List
Ikozvino chete makaturiji anotenderwa achave anoshanda kune vanoshanda. (Rondedzero inongoshanda chete kana opareta mapasscode akagoneswa)
KURARA TIMER (YAKABATWA)
Iyo Kurara Timer inoshanda zvakafanana neyakapfuura vhezheni yeCV firmware, asi ikozvino ine yayo icon uye zvigadziriso skrini.
Ingo seta huwandu hwenguva huchapfuura iyo CV yemagetsi unit isati yarara, pakati pegumi ne10 maminetsi (mumaminitsi gumi ekuwedzera).
ZANO PUKUTA MASETINGS
Iyo Tip Wipe Settings inoita kuti zvikwanise kuseta chiyeuchidzo kune opareta kuti achenese yavo solder tip. Configurable pakati pe10 ne200 seconds, pane imwe sekondi increments.
Kana nguva yakatarwa yapfuura, chiratidzo chiri kuruboshwe chinozadza skrini.
KURATIDZWA KWETEMIRIRO
Sarudza kuratidza tembiricha yesystem muFahrenheit kana Celsius kana kudzima chiratidziro zvachose
ZVINONZWA ZVAKAWANDA
Kune matatu marongero eInonzwika Alert: ON, OFF, uye FAILURE CHETE.
ONI: Yambiro inonzwika kana yapera solder kutenderera, mukuwirirana nemwenje we LED. Beeps mukuwiriranisa neGreen LED (kubudirira) kana mabuzz mukuwiriranisa neRed LED (kutadza).
KUKAKUNIKA CHETE: Inongorira chete kana Connection Validation ™ yaona kutadza kwejoints (mukuwiriranisa neRED LED chete).
DZIMA: Hapana chenjedzo inonzwika.
CONNECTION VALIDATION™ MODE SETTINGS (ITSVA)
Kune mitsva uye yakagadziridzwa CV mushandisi modhi. Sarudza iyo mushandisi modhi kubva kune zvigadziriso menyu inonyatso kuenderana neyako yakasarudzika kugadzira kana kudzidziswa zvinodiwa.
PRODUCTION MODE (Pcv)
Sezvinoita Kudzidzira Mode, iyo Connection Validation ™ system inosimbisa iyo IMC kuumbwa kwejoint yega yega uye inosaina mushandisi kuburikidza neyakasvibirira handpiece LED uye beep kana yemhando yejoini yagadzirwa.
MuKugadzira Mode, iyo Connection Validation ™ system inozivisa anoshanda pakupedzwa kwemaitiro ekusimbisa nekuvheneka mwenje we LED wakavakirwa muCV handpiece, nekupa (inosarudzika) chiratidzo chinonzwika, uye ine meseji paCV skrini:
- PASS: Green LED mwenje, zvichiratidza kuti kubatana kwapfuura kusimbiswa
- BVA: Chiedza chitsvuku che LED, zvichiratidza kuti muromo wakasimudzwa kubva pajoini nekukurumidza uye chiitiko hachina kupfuura kusimbiswa
- NGUVA YAPERA: Chiedza che LED dzvuku, zvichiratidza kuti muromo wanga uri pajoint kwenguva yakareba. Iyi ficha ndeyekubatsira kudzivirira mushandisi kubva pakusvibisa PCB kana kukonzera kusimudza-kubvisa padhi. Iyi i preprogrammed sere (8) kechipiri kunze, zvichibva paIPC Standard J-STD-001.
Kugadzira Modhi inzira nyowani yepamberi yeConnection Validation ™, ine nekukurumidza kuonesa uye kuvimba zvakanyanya nemushandisi kuti awane mubatanidzwa wakabudirira. Iyi modhi ndeyevashandisi vane ruzivo vanogona kunge vakawana mavhezheni apfuura eCV anonoka. (Haisi kuwanikwa muDual Output Mode)
TIMED MODE
MuTimed Mode, mushandisi kana maneja wekuita anoseta yakakodzera nguva-yakatarisana, zvichienderana nekushandisa uye tembiricha yecartridge iri kushandiswa. Iyo CV system inotora nguva yekugara yejoint yega yega uye inozivisa mushandisi paanofanira kubvisa solder tip oenderera mberi.
Hurefu hwenguva-pa-joint yakaiswa paTimeout Settings skrini (Icon 2), mukati mechikamu che3 kusvika ku8 seconds (IPC Standard).
Iyi ndiyo nzira yakakosha apo tembiricha inodiwa uye nguva chaiyo yekugara inogona kutsanangurwa pachine nguva, kuchengetedza iyo yekupedzisira mukuenderana pakati pevashandisi.
CV OFF
Ese Connection Validation™ masisitimu akadzimwa. Iyo CV unit inoshanda senge chero imwe SmartHeat® system.
OPERATOR PASSCODE SETTINGS (ZVIKAMUDZIDZWA)
Izvozvi zvave kugoneka kuti Admin/ Supervisor ape vatatu vanoshanda mapasscode ega ega muOperator Passcode Settings. Imwe neimwe yevatatu vanoshanda inomiririrwa pachiratidziro chikuru neimwe, mbiri, kana nhatu nyeredzi.
Nekupa mapasscode aya, zviri nyore kuronda kuti ndiani anopinda muchikamu chimwe nechimwe uye kudzora maparameter emunhu wega wega.
*Ona peji 8 yeCV User Guide
SYSTEM INFORMATION
Inoratidza ruzivo nezve CV system. Ex. Hapana Calibration Inodiwa uye ruzivo nezve ESD chengetedzo, ivhu rekutarisa system, uye pamusoro resistivity.
SUPERVISOR PASSCODE LOCK/SETUP
Iyi icon inotora Mutariri kuchiratidziro kwavanotonga yavo password uye mapassword anosvika matatu anoshanda.
*Ona peji 8 yeCV User Guide
BUDA MASETINGS MENU
Dzokera kuCV Main Screen.
CONNECTION VALIDATION™ RESOURCES
User Guide | Data Sheet | Mazano & Cartridges Sarudzo Yekutungamira
CV Firmware Update Guide | CV-5200 Firmware Update Loading Instructions
Enda kuMetcal.com kuti uwane rumwe ruzivo nezve Connection Validation™ Series Systems kana chero yedu yekutengesa, desoldering, rework, kuburitsa fume, uye zvinwiwa zvinoparadzira zvigadzirwa. Kana kubata Metcal kuti uwane rumwe rubatsiro.
Metcal Corporate Headquarters
10800 Mupata View Street,
Cypress, California, 90630, USA
Tel: 1-714-799-9910
Fax: 1-714-828-2001
E-mail: eorders@okinternational.com
Shanyira zvedu websaiti kuti uwane rumwe ruzivo uye kubata hofisi yeMetcal iri padhuze newe. Tine mahofisi akati wandei pasi rese akagadzirira kushandira zvaunoda.
Zvinyorwa / Zvishandiso
 |
METCAL CV-5200 Connection Validation (CV) [pdf] Bhuku reMushandisi CV-5200 Connection Validation CV, CV-5200, Connection Validation CV, Validation CV |
