Installation Guide for ALLEGION models including: XE360, XE360 Falcon 25 RX Wiring Kit, Falcon 25 RX Wiring Kit, Wiring Kit, Kit

Schlage XE360 Falcon25 RX Wiring Kit Installation Instructions

RX Wiring Kit

2024-01-31 — Shorten wires as necessary. 2b Connect to XE360 harness using the provided Scotchlok connectors (color orientation does NOT matter). Scan for user guide,.

Schlage XE360 Falcon25 RX Wiring Kit Installation ...

31 gen 2024 — 1a Slide the two included cable mounts onto the Common and. Normally Open wires from the exit device RX switch. 1b Use the included swabs to remove any ...

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • References

File Info : application/pdf, 1 Pages, 310.88KB

XE360 Falcon 25 Exit

RX Wiring Kit

Installation Instructions

Scan for user guide, interactive instructions,
warranty and more! alle.co/XE360

1 Route wires and install cable mounts.
1a Slide the two included cable mounts onto the Common and Normally Open wires from the exit device RX switch.
1b Use the included swabs to remove any grease from the mechanism case.
1c Position and route wires into mechanism as shown. 1d Expose adhesive and stick mounts into place.

2 Route wires through center case and make
connections.
2a Route wires into center case as shown. Shorten wires as necessary.
2b Connect to XE360 harness using the provided Scotchlok connectors (color orientation does NOT matter).

© Allegion 2024 115865 Rev. 01/24-a



References

• Allegion