AVIS 6357 Vantage Vue Sensor Suite Kuisa Gwaro

Nhanganyaya

The Vantage Vue® wireless sensor suite inounganidza kunze data yemamiriro ekunze uye inotumira iyo data pasina waya kuVantage Vue console kuburikidza neredhiyo ine simba shoma. Iyo sensor suite ine solar powered uye inosanganisira bhatiri rekudzosera kumusoro.

The Vantage Vue sensor suite ine muunganidzi wemvura, tembiricha / humidity sensor, anemometer, uye vane mhepo. Iyo tembiricha / humidity sensor inoiswa mune passive radiation shield kuti ideredze kukanganisa kwemwaranzi yezuva pakuverenga sensor. Iyo anemometer inoyera kumhanya kwemhepo, uye vane mhepo inoyera kwainoenda mhepo.

Iyo Sensor Interface Module (SIM) inogara mukati meiyo sensor suite uye inosanganisira "brains" dzeVan.tage Vue system uye radio transmitter. Iyo SIM inounganidza kunze data data kubva kune sensor suite sensors uye inotumira iyo data kuVan yakotage Vue console kana Weather Link Live.

Cherechedza: Van yakotage Vue sensor suite inogona kuendesa kune isingaverengeke nhamba yezvinyararire, saka unogona kutenga mamwe maconsoles ekushandisa mumakamuri akasiyana. Inogona zvakare kutumira kuna Davis Vantage Pro2 inonyaradza, WeatherLink Live, uye Davis Weather Nhume pamwe naVantage Vue consoles.

Inosanganisirwa Zvikamu uye Hardware

Vantage Vue Sensor Suite Zvikamu

Hardware

Hardware inosanganisirwa neVantage Vue sensor suite:

Zvishandiso Zvinodiwa

• Chipanera chinochinjika kana 7/16” (11 mm) chipanera
• Compass kana mepu yenzvimbo mepu
• U-Bolt
  
• Backing plate
  
• 1/4” kukiya washers
  
• 1/4” hex nzungu
  
• Debris skrini
  
• 0.05” Allen wren
  

Cherechedza: Kana chimwe chezvinhu zve Hardware chisipo kana chisina kubatanidzwa, bata Mutengi Service toll yemahara pa1-800-678-3669 nezve kugamuchira kutsiva Hardware kana zvimwe zvikamu.

Tsamba yekumisikidza paunenge uchishandisa ne Weather Link Live 

Panguva yekuseta, unogona kurekodha data isina kururama. For example, kana iwe ukamisa mukati mukati mezuva rinotonhorera unogona kurekodha nhema kunze tembiricha; kana iyo tipping spoon inotsvedza panguva yekumisikidza, iwe unorekodha nhema mvura data. Mu Weather Link Live, haugone kujekesa kana kugadzirisa iyi dhata rekuchengetedza. Kana iwe uine hanya nekurekodha data renhema, unogona kutora matanho aya kudzivirira:

• Kana iwe uri kushandisa ese ari maviri console uye Weather Link Live, gadzira uchishandisa chete koni. Gadzira iyo Weather Link Rarama mushure mekunge waita shuwa yekubatanidza kune koni uye kukwira iyo sensor suite.
• Kana iwe uchingoshandisa Weather Link Live uye pasina koni, misa panopisa tembiricha yakafanana neyekunze tembiricha. Usaise mvura inonaya kusvika iyo sensor suite yaiswa saka haizorekodha mvura isiriyo. Tarisa kutapurirana nekupuruzira zvinyoro nyoro makapu emhepo. Izvi zvinorekodha data rakashata remhepo asi hazvifanirwe kugadzira yenhema yakakwira.

Kugadzirira iyo Sensor Suite yekuisa

Tevera matanho muhurongwa; imwe neimwe inovaka pamabasa akapedzwa mumatanho apfuura.

Cherechedza: Shandisa tafura yebasa yakachena, yakanyatsovhenekerwa kana nzvimbo yebasa kugadzirira sensor suite yekuisa.'

1. Batanidza makapu emhepo kune anemometer.
2. Batanidza vane mhepo.
3. Isa mvura inounganidza tipping spoon musangano.
4. Isa chidzitiro chemarara mumuunganidzi wemvura.
5. Isa simba kubva kune sensor suite bhatiri.
   Cherechedza: Mushure meichi nhanho, isu tinokurudzira kuti umise koni yako, wozodzoka kuzopedzisa kuisirwa sensor suite. Ona Van yakotaguye Vue Console Manual.
   Mamwe matanho ekuseta yepamusoro: 
   • Chengetedza transmitter ID
   • Shandura ID yekutapurirana yekutaurirana isina waya, kana zvichidikanwa
6. Simbisa data kubva kune sensor suite.

Batanidza Mhepo Cups kune Anemometer

The Vantage Vue anemometer inoyera kumhanya kwemhepo. Iwo makapu emhepo akaiswa pane anemometer shaft pamusoro peiyo sensor suite musangano.

1. zvinyoronyoro tsveta musangano wekombe yemhepo pasi paanemometer's stainless simbi shaft kusvika painoenda, sezvakaratidzwa.
2. Shandisa chipanera cheAllen chakapihwa kuomesa siruu yekuseti padhuze nepamusoro pechikamu che "hub" yemakombe emhepo, sekuratidzwa. Ita shuwa kuti iyo set screw yakakwizwa zvizere uye yakasimba.
3. Dhonza zvinyoro nyoro pahubhu kuti uone kuti anemometer yakasungirirwa zvakachengeteka kune shaft.
4. Pindura makapu emhepo kuti uone kuti anotenderera akasununguka.

Isai makapu pane Stainless simbi shaft.

Simbisa sikuruu neAllen wrench.

Cherechedza: Kana makapu emhepo asingatenderere zvakasununguka, sunungura siruu yakagadzika, bvisa makapu emhepo kubva mugomba, uye dzokorora matanho ekuisa.

Batanidza Mhepo Vane

The Vantage Vue wind vane inoyera kwainoenda mhepo. Mhepo ine mhepo yakasungirirwa pane shaft yesimbi isina tsvina kune rimwe divi remusangano we sensor suite kubva kumakapu emhepo.

1. Bata iyo sensor suite assembly padivi payo ine anemometer uye nemwaranzi nhovo kuruboshwe rwako, mhepo vane shaft kurudyi kwako uye mhepo makapu kure newe.
2. Kana iyo sensor suite ikaitwa nenzira iyi, mhepo ine shaft yakachinjika, uye inozvitungamidza kuitira kuti rutivi rwayo rwakafuratira rwuve rwakatarisa kurudyi, sezvakaratidzwa.
3. Uchibata sensor suite assembly neruoko rwako rweruboshwe, bata mhepo ine ruoko rwerudyi kuitira kuti "museve" unongedza pasi.
4. Svetera zvinyoronyoro mhepo ine shaft yemhepo, tenderedza mhepo ine mhepo zvishoma kuruboshwe uye kurudyi kana zvichidikanwa, kusvikira magumo emugero achionekwa uye anobuda zvishoma kubva pasi pevhu remhepo.
5. Chengetedza vheji yemhepo kushaft nekusimbisa zvakasimba siruu yemhepo ine mhepo ine Allen wrench yakapihwa.
   

Isa iyo Rain Collector Tipping Spoon Assembly

1. Tsvaga iyo tipping spoon musangano slot pazasi peiyo sensor suite base.
2. Isa iyo yakafara magumo etipping spoon musangano kutanga, uchitsveta pasi pemuromo wakasimudzwa weiyo slot.
3. Isa nzvimbo yakamanikana mukati me slot uye simbisa thumbscrew zvakachengeteka.
   

Isa iyo Debris Screen

The Vantage Vue sensor suite mvura inounganidzira marara skrini inotora marara ayo anogona kunge achivhara mvura yako inounganidza.

1. Tsvaga iyo diki nhema yepurasitiki sensor suite marara skrini mune yako hardware package.
   Chidzitiro chemarara chine ma tabo madiki mana anoibata panzvimbo mujinga remuunganidzi wemvura.
2. Kubata iyo sensor suite musangano neruoko rumwe, uye uchibata marara skrini kumusoro, dzvanya mukati memuvhuro muunganidzi wemvura kusvika ma tabo apinda mukuvhurwa.
   

Isa Battery Power

The Vantage Vue sensor suite inochengetedza simba kubva kune solar panel yemagetsi husiku. Iyo 3-volt lithium bhatiri inopa yekuchengetedza simba sosi. Iyo bhatiri compartment iri pazasi peiyo sensor suite base. Bhatiri rinotumirwa rakaiswa mukamuri yebhatiri ine bhatiri rekudhonza tab kudzivirira bhatiri simba rekubatanidza kusvika yaiswa.

1. Sunungura chikweshe chechigunwe kuti ubvise gonhi rekamuri rebhatiri.
2. Bata bhatiri kuti risadonha uye bvisa bhatiri rekudhonza tab.
   Kuti uone simba, mirira masekonzi makumi matatu wobva wasundidzira uye wosunungura bhatani reID ID chena padivi pebhatiri. Iyo green transmitter ID LED padyo nebhatiri compartment inovhenekera kana iwe uchidzvanya bhatani.
   
   Cherechedza: Dzvanya bhatani kamwe uye worisunungura. Usadzvanya kakawanda kana kuibata pasi.
   Paunoburitsa bhatani, iyo LED inopenya kamwe chete (inoratidza transmitter ID 1), yobva yatanga kupenya ega ega 2.5 masekondi kuratidza kutapurirana kwepaketi yedata. Kupenya uku kunomira mukati memaminitsi mashoma kuchengetedza hupenyu hwebhatiri.
3. Tsiva gonhi rekamuri rebhatiri.
   Cherechedza: Kana iwe usati watogadzira uye nekugonesa Van yakotage Vue console, ita izvozvo usati waenderera mberi neiyo sensor suite yekumisikidza. Kuti ugamuchire zvakanakisa, iyo console uye sensor suite inofanirwa kunge inosvika gumi tsoka (10 metres) kure.
4. Iyo console kana Weather Link Live inotora chiratidzo cheredhiyo uye inozadza minda yedata. Izvi zvinowanzoitika nekukurumidza, asi mune mamwe mamiriro ezvakatipoteredza zvinogona kutora kusvika kumaminitsi gumi.

Yepamberi Kuisa: Simbisa iyo Transmitter ID ye sensor suite

Van yakotage Vue console inogona kushandiswa kuteerera kune Vantage Pro2 sensor suite panzvimbo yeVantage Vue sensor suite, uye yakasarudzika anemometer transmitter kit.

Cherechedza: Kana uri kushandisa chete Vantage Vue console uye sensor suite, uye hapana zvimwe zviteshi zvemamiriro ekunze zveDavis padyo, unogona kusvetukira ku "Verify Data kubva kuSensor Suite".

Kuti utaure, iyo console uye sensor suite inofanirwa kunge iine yakafanana transmitter ID. Pafekitari, maID ese ari maviri akaiswa kune default ID 1. Kusimbisa iyo transmitter ID yeVan yakotage Vue sensor suite:

1. Sunda uye sunungura iyo transmitter ID bhatani kamwe. Ichavhenekera uye yoenda kana waisunungura.
2. Mushure mekumbomira zvishoma, inopenya kamwe chete kana kupfuura (kusvika ku8) nguva. Cherechedza nhamba ye
   nguva iyo transmitter ID LED inopenya, iyo inoratidza iyo transmitter ID nhamba.

Kunze kwekunge wachinja nemaune ID yako yekutumira, iyo LED inofanirwa kubwaira kamwe chete nekuti iyo default transmitter ID ye sensor suite ndeye 1. Kana wachinja ID, iyo LED inofanirwa kubwaira nhamba dzenguva dzakaenzana neID yawakaseta kureva, kaviri kune ID ye2, katatu kune ID ye3, nezvimwewo).

Mushure mekubwaira ID yekutumira, mwenje unozotanga kupenya ese 2.5 masekonzi, zvichiratidza kutapurirana kwepaketi.

Cherechedza: Iyo transmitter pane sensor suite uye inogamuchira pane koni inotaurirana chete kana ese ari maviri akaiswa kune imwechete transmitter ID.

Cherechedza: Kana iwe ukabata bhatani rakareba uye netsaona pinda iyo "seta nyowani transmitter ID" modhi pawanga usingadi, ingo sunungura bhatani womirira masekondi mana. Chero bedzi ukasadzvanya bhatani zvakare, iyo yekutanga transmitter ID icharamba ichishanda.

Yepamberi Kuisirwa: Seta Itsva Transmitter ID pane iyo Sensor Suite

Cherechedza: Muzviitiko zvakawanda, hazvizove zvakakosha kuti uchinje iyo transmitter ID. Kana zvichidikanwa kuchinja iyo transmitter ID, iwe unofanirwa kushandisa iyo yakafanana ID ye sensor suite uye console.

The Vantage Vue sensor suite inotumira ruzivo rwemamiriro ekunze kuVantage Vue koni uchishandisa imwe yemasere inosarudzwa transmitter ID. Iyo default transmitter ID kune ese ari maviri sensor suite uye iyo Vantage Vue console ndeye 1. Chinja iyo transmitter ID kana imwe Davis Instruments isina waya yemamiriro ekunze iri kushanda pedyo uye yatoshandisa transmitter ID 1, kana kana uine sarudzo yeAnemometer Transmitter Kit ine ID 1. Kuseta ID itsva yekutapurirana:

1. Sunda uye ubate bhatani reID ID kusvika iyo LED yatanga kupenya nekukurumidza. Izvi zvinoratidza kuti iri mukugadzirisa mode.
2. Sunungura bhatani, uye iyo LED ichasviba.
3. Batanidza bhatani nhamba yenguva dzakaenzana neyako yaunoda transmitter ID itsva. Kureva, kana iwe uchida kushandura ID kuita 3, pusha bhatani katatu; kune ID yaunoda ye4, baya bhatani kana.

Mushure memasekonzi mana apera pasina mamwe madhindi, iyo LED inopenya zvakafanana
nhamba yenguva seyo itsva transmitter ID. (Mushure mekubwaira nhamba yeID yekutumira, mwenje unozotanga kupenya pese panofambiswa pakiti, anenge masekondi maviri neshanu.)

Simbisa Dhata kubva kuSensor Suite

Cherechedza: Kana uri kushandisa Weathr Link Rarama neyako sensor suite, ndapota ona "Chinyorwa nezve kumisikidza paunenge uchishandisa ne Weather Link Live".

Kuti uone kugamuchirwa kwe sensor suite data neVantage Vue console, iwe uchada yako
Powered-up console uye sensor suite. Kuti ugamuchire zvakanakisa, iyo console uye sensor suite inofanirwa kunge inosvika gumi tsoka (10 metres) kure.

1. Kana iyo koni iri muSetup Mode, dzvanya uye bata ZVAITWA kusvika Current Weather skrini ichiratidza. Iyo antenna icon inoonekwa pasi pemhepo kambasi yakasimuka. Tarisa iyi icon kuti uone kuti "mafungu ekutapurirana" anooneka, achiratidza kugamuchirwa kwepaketi.
   Kuverenga kwema sensor kubva kune sensor suite kunofanirwa kuratidzwa pachiratidziro mukati memaminitsi mashoma.
2. Kukona yekurudyi kwechidzitiro, tsvaga kunze tembiricha.
3. Dzvanya zvinyoro nyoro makapu emhepo kutarisa kumhanya kwemhepo, uchidzvanya bhatani reWIND pane koni kuti uchinje pakati pekumhanya uye kwainoenda mumhepo yakasimuka.
4. Chengetedza mhepo zvinyoronyoro, uye tendera masekonzi mashanu ekuti kuratidzwa kwemhepo kugadzikane usati waifambisa zvakare.
   Cherechedza: Nzira yakanaka yekuona kuti koni yako iri kuteerera kune yako sensor suite uye kwete imwe Davis chiteshi chiri padyo, ndeye kuve nechokwadi chekuti mhepo inotaridzwa inofananidzwa negwara remhepo yako vane maererano nemagetsi ezuva, ayo anofungidzirwa kuti akatarisa kumaodzanyemba. For example, kana iwe ukafambisa vane kunongedza zvakananga kure nemwaranzi shield, iyo console inofanira kuratidza mhepo yekuenda kumaodzanyemba; kana iwe ukazoshandura vane 180 ° saka inongedzerwa kumashure kune iyo radiation shield, iyo mhepo inotungamira pane console inofanira kuchinja kuenda kuchamhembe.
5. Inenge miniti imwe mushure mekutora chiratidzo, iyo yekunze humidity kuverenga kunofanirwa kuratidzwa pane console, pazasi pekunze kwekushisa kuratidza.
6. Simbisa mvura inonaya. Pane yako console skrini, sarudza iyo RAIN DAY kuratidzwa. (Ona Vantage Vue Console Manual.). Nyatsobata sensor yako suite pamusoro pekunyura uye, uchiona RAIN ZUVA kuratidzwa pane yako koni, zvishoma nezvishoma dururira imwe-hafu kapu yemvura muRain Collector. Mirira masekondi maviri kuti uone kana chiratidziro chichinyora kuverenga kwemvura.
   Cherechedza: Iyi nzira inosimbisa kuti kuratidzwa kwemvura kuri kushanda. Haikwanise kushandiswa kuona chokwadi.
7. Yazvino data inoratidzwa pane console inosimbisa kutaurirana kwakabudirira.
   Cherechedza: Mune zvimwe zviitiko zvinogona kutora nguva yakareba semaminitsi gumi kuti kuverenga kunyorese pane yako console.

Kana matambudziko ekutaurirana aripo pakati peiyo wireless sensor suite neconsole, ona "Troubleshooting Sensor Suite Reception"

Kuisa iyo Sensor Suite

Kusarudza Nzvimbo yeSensor Suite

Iyo sensor suite musangano unosanganisira muunganidzi wemvura, mhepo vane, anemometer, tembiricha uye humidity sensors, radiation shield, uye SIM imba. Iwe uchashandisa iyo U-bolt uye yakabatana nzungu uye washers anosanganisirwa neako sensor suite inokwira hardware package kuti uise sensor suite padanda. (Ona "Hardware".

Kuti vaone kuti Vantage Vue mamiriro ekunze chiteshi inoita pazvakanakisa, shandisa aya madhiraivha kuti usarudze iyo yakanyanya kukwirisa nzvimbo yeiyo sensor suite. Ita shuwa yekutarisa kureruka kwekuwana kwekugadzirisa uye isina waya yekutapurirana renji paunenge uchigara chiteshi.

Cherechedza: Paunenge uchisarudza nzvimbo yekuisa sensor yako suite, kunyanya padenga remba, ita shuwa kuti inzvimbo iri kure netambo dzemagetsi. Tsvaka rubatsiro rwenyanzvi kana usina chokwadi nezvekuchengetedzwa kwekuiswa kwako.

Sensor Suite Installation Guidelines

Cherechedza: Aya nhungamiro yenzvimbo inoratidza chimiro chakanaka. Kashoma zvinokwanisika kugadzira iyo yakakwana yekuisa. Iyo iri nani iyo siting, iyo data yako yakanyanya kujeka.

• Isa iyo sensor suite kure nenzvimbo dzekupisa senge chimneys, heaters, air conditioners, uye exhaust vents.
• Isa iyo sensor suite ingangoita 100′ (30 m) kure nechero asphalt kana kongiri mugwagwa unotora uye unoburitsa kupisa kubva kuzuva. Dzivisa kuiswa pedyo nefenzi kana mativi ezvivakwa zvinowana zuva rakawanda mukati mezuva.
• Isa iyo sensor suite senhanho sezvinobvira kuti uve nechokwadi chemvura chaiyo uye zviyero zvemhepo. Shandisa iyo yakavakirwa-mukati bubble level pamusoro pe sensor suite, ingori pamusoro pesolar panel, kuve nechokwadi chekuti sensor suite iri nhanho.
• MuNorthern Hemisphere, solar panel inofanira kutarisana nechokumaodzanyemba kuitira kunyanya kuratidzwa kwezuva.
• KuSouthern Hemisphere, solar panel inofanira kutarisana nechekuchamhembe kuitira kuti zuva rive zvakanyanya.
  

Cherechedza: Mafambiro emhepo anogadziriswa tichifunga kuti solar panel yakatarisa kumaodzanyemba. Kana iwe ukaisa sensor suite ine solar panel inonongedza kune imwe nzira isiri yekumaodzanyemba, iwe unozofanirwa kushandisa iyo mhepo inotungamira calibration basa muVan.tage Vue console kuitira kuti uwane kuverenga kwakaringana kwemhepo. Ona Vantage Vue Console Manual kuti uwane rumwe ruzivo.

• Zvakanaka, simudza sensor suite kuti ive pakati pe5' (1.5 m) uye 7' (2.1 m) pamusoro pevhu pakati penzvimbo yakatsetseka zvinyoro nyoro kana kuti yakati sandara, inogara ichicherwa huswa kana nzvimbo yakasarudzika inodonha mvura kana kuchinaya. . Iwe unogona zvakare kukwidza sensor suite padenga, pakati pe5' (1.5 m) uye 7' (2.1 m) pamusoro pedenga remba. Kune nzvimbo dzine avhareji yepamusoro yegore kudzika kwechando pamusoro pe3' (0.9 m), simudza sensor suite inokwana 2' (0.6 m) pamusoro pehudzamu uhwu.
• Usambofa wakaisa iyo sensor suite painozopfapfaidzwa yakananga neinosprinkler system.
• Dzivisa kuisirwa pedyo nemitumbi yemvura yakaita semadziva ekutuhwina kana madziva.
• Usatsvage iyo sensor suite pasi pemiti canopies kana padyo nemativi ezvivakwa zvinogadzira "mimvuri yemvura." Kune nzvimbo dzine masango ane masango, saiti iyo sensor suite munzvimbo yakachena kana meadow.
• Isa iyo sensor suite munzvimbo ine yakanaka kuratidzwa kwezuva zuva rese.
• Zvekurima zvekushandisa:
• Isa sensor suite kuitira kuti ive pakati pe5' (1.5 m) ne7' (2.1 m) pamusoro pevhu uye pakati pepurazi pakati pemhando dzezvirimwa zvakafanana (seminda yemichero miviri, minda yemizambiringa miviri, kana zvirimwa zviviri zvemitsara) , kana zvichibvira.
• Dzivisa nzvimbo dzakafumurwa kwakawanda kana kazhinji kushandiswa kwemakemikari ekurima (ayo anogona kukanganisa masensa).
• Dzivisa kuiswa pamusoro pevhu risina chinhu. Iyo sensor suite inoita zvakanyanya kana yakaiswa pamusoro-yakadiridzwa zvakanaka, inogara ichichekwa huswa
• Kana iyo yekupedzisira matatu nhungamiro isingagone kusangana, isa sensor suite kumucheto kwechirimwa chekutanga chekufarira.

Siting nhungamiro inogona kukanganisa anemometer 

• Kuti uwane data rakakwana remhepo, isa sensor suite kuitira kuti makapu emhepo asvike 7' (2.1 m) pamusoro pezvipingamupinyi zvakaita semiti kana zvivakwa zvinogona kukanganisa kuyerera kwemhepo.
• Kuti uwane data rakakwana remhepo, unogona kukwira sensor suite padenga, uchichengeta mupfungwa nyore kuwana kune iyo sensor suite yekuchengetedza uye kuchengetedza kufunga. Zvakanaka, ikwidzire kuitira kuti makapu emhepo asvike 7' (2.1 m) pamusoro pedenga remba.
• Chiyero chekushandiswa kwemamiriro ekunze nendege ndechekuisa anemometer 33' (10 m) pamusoro pevhu. Tsvaka rubatsiro rwenyanzvi pakugadzwa kwakadaro.
• Chiyero chekushandiswa kwekurima ndechekuisa makapu emhepo 6' (2 m) pamusoro pevhu. Izvi zvakakosha kune evapotranspiration (ET) kuverenga.

Cherechedza: Pakukwirisa denga, uye nyore kuisa, tinokurudzira kushandisa sarudzo yetatu (#7716). Kune kumwe kuisirwa, shandisa Mounting Pole Kit (#7717).

Cherechedza: Kuti uwane mamwe akadzama mazano ekugara, ona Chishandiso Cherechedzo #30 pane Davis Tsigiro webnzvimbo (http:// www.davisinstruments.com/support/weather).

Kuisa iyo Sensor Suite

The Vantage Vue sensor suite inogona kungoiswa pamusoro pedanda kana tsvimbo.

Cherechedza: Danda rekukwira harina kubatanidzwa neVan yakotage Vue sensor suite uye inofanirwa kutengwa zvakasiyana, kungave kubva kuDavis Instruments kana kubva kune yako yemunharaunda hardware mutengesi.

Inokurudzirwa Zvishandiso zvePole Mounting

• Shandisa iyo Mounting Tripod (#7716) kune zviri nyore kukwira.
• Shandisa iyo Mounting Pole Kit (#7717) kusimudza kureba kwekumisikidza kwe sensor suite nekusvika 37.5 ″ (0.95 m).

General Mirayiridzo Yekuisa pane Pole

• Iine U-bolt yakapihwa, sensor suite inogona kukwidzwa padanda kana tsvimbo ine dhayamita yekunze kubva pa1 ″ kusvika 1.75 ″ (25 - 44 mm).
• Kuti ukwire padanda diki, tora U-bhoti inoenderana nemabhesi ekuvhurwa asi ine chikamu chakareba chine shinda. Kana ukaisa sensor suite padanda diki rine U-bolt inosanganisirwa, zvikamu zvakarukwa zveU-bolt zvichave zvipfupi kuti zvichengetedze zvakachengeteka sensor suite.
  

Kuisa iyo Sensor Suite paPole

1. Kana iwe uri kukwirisa sensor yako suite paDavis Mounting Tripod kana danda rinosanganisirwa neDavis Mounting Pole Kit, tevera mirairo inosanganisirwa neayo zvigadzirwa zveDavis kuti uiswe zvakanaka.
   Kana usiri kushandisa chimwe cheizvi zvigadzirwa zveDavis, kwira padanda resimbi rine dhayamita rekunze kubva pa1 ″ kusvika 1.75 ″ (25 - 44 mm).
   Cherechedza: Zvakakosha kuti danda rekusungirira rive rakadzikama. Unogona kuda kushandisa nhanho senge magineti "torpedo level" kuvimbisa kuti sensor suite, kana yaiswa pamusoro pedanda, ichave nhanho.
2. Uchishandisa mufananidzo uri pamusoro segwara, bata sensor suite kuitira kuti makapu emhepo nemwaranzi nhovo zviri kuruboshwe uye zvinyoro nyoro isa sensor suite pamusoro pedanda.
3. Paunenge wakabata chigadziko chekusimudza che sensor suite pakatarisana nedanda, isa magumo maviri eU-bhoti akatenderedza danda uye nepamaburi maviri ari muC-shaped bracket pabhesi.
4. Svetedza simbi inotsigira ndiro pamusoro pebhaudhi inogumira painotambanudza kubva kure kure kwebhureketi.
5.  Chengetedza ndiro yekutsigira nekiyi washer uye hex nut pane imwe neimwe yebhaudhi inogumira, sezvakaratidzwa mumufananidzo.
6. Simbisa iyo hex nzungu neminwe yako chete kuitira kuti sensor suite ingochengetedzeka zvakakwana padanda kuti iwe usunungure kubata kwako.
7. Kana iwe uri muNorthern Hemisphere, tenderedza sensor suite padanda kuitira kuti solar panel yakatarisa kumaodzanyemba; kana iwe uri kuSouthern Hemisphere, tenderedza sensor suite kuti solar panel yakatarisa kuchamhembe. Izvo chaizvo izvo solar panels yakatarisana nekuda kwekumaodzanyemba kana kuchamhembe, iyo yakanyanya kunaka kuverenga kwako kwemhepo.
   Cherechedza: Usavimba nekambasi kunze kwekunge yakanatswa zvakanaka. MuNorth America panogona kusvika 15° musiyano pakati pechokwadi chekuchamhembe nekuverenga kambasi.
8. Kana iyo sensor suite yakanyatso kutungamirwa, simbisa iyo hex nzungu nechipanera. Usapfuure 96 inch-pounds (10.8 newton-mita) ye torque.
   Cherechedza: Iwe unogona kutarisa kune iyo bubble level pamusoro peiyo sensor suite kuti uve nechokwadi chekuti yakaenzana sezvinobvira.

Kupedza Kuisa

Mhepo yemhepo inogadziriswa pafekitari kuti ive yakarurama kana solar panel yakananga kumaodzanyemba.
Kana solar panel yako isina kunongedzera maodzanyemba, unofanirwa kuenzanisa koni yako kuitira kuti iratidze kuverenga kwakaringana kwemhepo. Chero zvazvingaitika, iwe unogona zvakare kuenzanisa koni yako kuti igadzirise chiteshi chako kuti chinyatsoita. Tarisa kune Van yakotage Vue Console Manual kugadzirisa yako console.

Cherechedza: Calibration inofanira kuitwa kana iwe uri kuSouthern Hemisphere, kana iwe uri kuNorthern Hemisphere uye usingakwanise kuisa sensor yako suite ine solar panel yakatarisana nekumaodzanyemba.

Kubvisa Dhata Yakaunganidzwa Panguva Yekuyedza uye Kuiswa

Iye zvino iyo sensor suite yakaiswa kunze, chero data yakaunganidzwa uye yakachengetwa mukoni panguva yekuyedzwa uye kukwira inofanira kucheneswa.

Kubvisa data rese rakaunganidzwa pane console:

1. Pane iyo console, dzvanya MHEPO kuitira kuti museve wekusarudza uoneke uri padhuze nemhepo data pachiratidziro. Simbisa kuti kumhanya kwemhepo kunoratidzwa pakampasi rose.
2.  Press 2ND, wobva wadzvanya wobata ZVAKANAKA kwemasekonzi matanhatu uye kusvika waona "KUCHERA ZVINO" munzvimbo yemamiriro ekunze.
   Cherechedza: Kana uri kushandisa Weather Link Rarama neVan yakotage Vue sensor suite, ndapota ona "Chinyorwa nezve kumisikidza paunenge uchishandisa ne Weather Link Live" pa.

Maintenance uye Troubleshooting

Maintenance

Cherechedza: Kana iwe uri kushandisa Weather Link Live, ipfungwa yakanaka kuisimbisa pasi usati wachengeta sensor yako suite kuti isaunganidze data rakashata panguva yekugadzirisa matanho.

Kuchenesa Radiation Shield

Nzvimbo yekunze yekudzivirira kwemwaranzi inofanira kucheneswa kana pane yakawandisa tsvina uye kuvaka-up pamahwendefa. Shandisa adamp jira rekuchenesa mucheto wekunze wemhete imwe neimwe.

Cherechedza: Kupfapfaidza pasi kana kushandisa mvura zvakanyanya kuchenesa nhovo yemwaranzi kunogona kukuvadza masensa anonzwa kana kushandura data iyo sensor suite iri kufambisa.

Ongorora chinodzivirira mwaranzi yemarara kana matendere ezvipembenene kamwechete pagore uye kuchenesa kana zvichidikanwa. Kuunganidzwa kwezvinhu mukati menhovo kunoderedza kushanda kwayo uye kunogona kukonzera kusakwana kwekushisa uye kuverengwa kwemwando.

1. Uchishandisa Phillips head screwdriver, sunungura maviri#6 x 2 1/2” masiruuru akabata mahwendefa mashanu ekudzivirira mwaranzi pamwe chete, sezvaratidzwa.
2. Kuchenjerera kuchengetedza kurongeka uko mahwendefa mashanu akaunganidzwa, paradzanisa mahwendefa sezvakaratidzwa uye bvisa marara ose kubva mukati menhovo.
3. Unganidzazve marata nenzira imwechete yaakadzurwa, woabatanidza uchishandisa Phillips head screwdriver kuti usimbise #6 x 2 1/2” screws, sezvakaratidzwa.
   

Kuchenesa Muunganidzi Wemvura, Debris Screen, uye Tipping Spoon Module

Kuti uchengetedze huchokwadi, nyatsochenesa mvura inounganidza koni uye sikirini yemarara sezvinodiwa kana kamwechete pagore.

Cherechedza: Kuchenesa muunganidzi wemvura uye chipunu chekupa kunogona kukonzera kuverenga kwemvura yenhema. Ona "Kubvisa Dhata Yakaunganidzwa Panguva Yekuedza uye Kuiswa".

1. Shandisa adamp, jira rakapfava rekubvisa chero marara kubva muunganidzi wemvura uye sikirini yemarara.
2. Shandisa mapombi ekutsvaira kubvisa chero marara asara muchidzitiro.
3. Kana zvikamu zvose zvakachena, simbura nemvura yakachena.

Kuchenesa iyo tipping spoon musangano, inofanira kutanga yabviswa kubva kune sensor suite base.

1. Vhura iyo thumbscrew kuchengetedza iyo tipping spoon musangano kune sensor suite base. Svetera gungano pasi uye kure nebhesi.
2. Shandisa adamp, jira rakapfava rekubvisa zvinyoro nyoro chero tsvina kubva pamusangano wetipping spoon, kungwarira kuti usakuvadza chero zvikamu zvinofamba kana kukwenya chipunu.
3. Kana zvikamu zvose zvakachena, sukurudza nemvura yakachena, uye shandura gungano. (Ona "Gadzira Muunganidzi Wemvura Tipping Spoon Assembly".

Kugadzirisa matambudziko

Troubleshooting Sensor Suite Reception

Kana iyo console isiri kuratidza data kubva kune sensor suite:

1. Tarisa kuti sensor suite uye console zvine simba uye kuti koni haisi muSetup Mode. (Ona Vantage Vue Console Manual.)
2. Ita shuwa kuti sensor suite bhatiri yakaiswa zvakanaka.
3. Famba uchitenderedza mukamuri ine koni, wakamira kwechinguvana munzvimbo dzakasiyana siyana, kuti uone kana uri kutora masaini kubva kune sensor suite. Tarisa pachiratidziro pazasi kambasi yemhepo yakasimuka kune diki graphic yeredhiyo antenna.
   Cherechedza: Kana iwe usingaone chiratidzo cheantenna, dzvanya 2ND uye SETUP kuti upinde Setup Mode, wobva wadzvanya ZVAITA kuti udzokere kuChazvino Weather Screen. Iyo icon inofanira kuoneka.
4. Diki "mafungu ekutumira" anoratidza pamusoro peiyo antenna icon uye shandura nekudzima kana koni yagamuchira kutapurirana.
   Kana iwe usingaone iyo antenna's transmission wave graphic zvishoma nezvishoma ichibwaira, zvisinei kuti wakamira papi neconsole, unofanira kufonera Technical Support.
5. Kana iyo Transmitter ID LED isingavheneke mushure mekudzvanya bhatani rekutumira, pane dambudziko ne sensor suite transmitter. Dana Technical Support.
6. Kana, mushure mekudzvanya Transmitter Pushbutton, iyo Transmitter ID LED inopenya ese 2.5 masekonzi (inoratidza kutapurirana) asi koni yako isiri kutora chiratidzo chero kupi mukamuri, inogona kunge ine hukama kune chimwe chezvikonzero zvinotevera:
   • Iwe wakashandura sensor suite Transmitter ID ye sensor suite kana console, asi kwete ese ari maviri.
   • Kutambira kuri kuvhiringwa nekukanganiswa kwe frequency kubva kunze, kana chinhambwe nezvipingamupinyi zvakakurisa.
     Cherechedza: Kupindira kunofanirwa kuve kwakasimba kudzivirira iyo console kubva mukugamuchira chiratidzo ichiri mukamuri imwechete seye sensor suite.
   • Pane dambudziko neVantage Vue console.
7. Kana dambudziko rekugamuchira iyo isina waya yekufambisa ichiripo, ndapota taura neTechnical Support.
   Cherechedza: Ona "Kubata Davis Instruments"

Matambudziko Kushandisa Zviteshi zviviri zvekutumira

Imwe Vantage Vue console inogona kugamuchira masaini kubva kune imwe sensor suite, ingave Vantage Vue kana Vantage Pro2 sensor suite, uye yakasarudzika anemometer transmitter kit. Ita shuwa kuti ma ID ekutumira akagadziriswa nemazvo. Ona Van yakotage Vue Console Manual yeruzivo rwekugadzirisa maID ekutumira

Yakawanda Yakajairika Mvura Inounganidzira Dambudziko

"Data rangu remvura rinoita kunge rakaderera."
Kana muunganidzi wemvura achiita seasina kuzivisa kunaya kwemvura, chenesa sikirini yemarara uye tipping spoon module kubvisa chero tsvina.

Matambudziko Akawanda Anemometer

"Makapu emhepo ari kutenderera asi koni yangu inoratidza 0 mph."
Makapu emhepo anogona kunge asiri kushandura shaft. Bvisa makapu kubva kune anemometer nekusunungura screw set. Dzorera makapu pashaft uye ita shuwa kuti unoatsvedza pasi pemugodhi kusvika pazvinobvira. Simbisazve siruu yakagadzika.

"Makapu emhepo haatenderere kana kutenderera nekukurumidza sezvaanofanira."
Anemometer inogona kunge iri panovharirwa mhepo nechimwe chinhu, kana kuti panogona kunge paine kukweshana kunovhiringa kutenderera kwemakombi. Bvisa makapu emhepo nekusunungura siruu yakaseti, uye bvisa zvipembenene kana marara angave ari kukanganisa kutenderera kwekapu.

Dzorera shaft iyo makomichi anotenderera. Kana ichinzwa gritty kana kuoma, bata Davis Technical Support.

Cherechedza: Usazora shaft kana mabheya nenzira ipi zvayo.

"Kuverenga hakusi izvo zvandaitarisira kuti zvive."
Kuenzanisa data kubva kune sensor suite yako kune zviyero kubva kuTV, redhiyo, mapepanhau, kana muvakidzani HAIYO nzira yechokwadi yekuona kuverenga kwako. Kuverenga kunogona kusiyana
zvakanyanya munzendo pfupi. Maitiro aunoita saiti sensor suite uye anemometer anogonawo kuita mutsauko mukuru. Kana uine mibvunzo, bata Davis Technical Support.

Kubata Davis Instruments

Kana iwe uine mibvunzo nezve sensor suite kana Vantage Vue system, kana kusangana nematambudziko ekuisa kana kushanda iyo mamiriro ekunze, ndapota taura neDavis Technical Support.

Cherechedza: Ndokumbirawo usadzorere zvinhu kufekitori kuti zvigadziriswe pasina mvumo yekutanga.

Pamhepo: www.davisinstruments.com
Ona iyo Yekutsigira Yekutsika chikamu chemakopi emashandisirwo emanyowani, zvigadzirwa zvigadzirwa, manyorerwo ekushandisa, software kugadzirisa, uye nezvimwe.

E-mail: support@davisinstruments.com
Runhare: 510-732-7814 Muvhuro - Chishanu, 7:00 am - 5:30 pm Pacific Nguva.

Zvinotsanangurwa

Ona zvizere zvakatemwa zveVan yakotage Vue chiteshi pane yedu websaiti:
www.davisinstruments.com

Operating Temperature: 40° kusvika +150°F (-40° kusvika +65°C)
Kusashanda (Kuchengeta) Tembiricha: 40° kusvika +158°F (-40° kusvika +70°C)
Dhirowa Yazvino (ISS SIM chete): 0.20 mA (avhareji), 30 mA (pamusoro) pa 3.3 VDC
Solar Power Panel (ISS SIM): 0.5 Watts
Bhatiri (ISS SIM): CR-123 3-Volt Lithium sero
Hupenyu hwebhatiri (3-Volt Lithium cell): Mwedzi 8 pasina chiedza chezuva - anopfuura makore maviri zvichienderana nekuchaja kwezuva
Mhepo Speed ​​​​Sensor:  Mhepo makapu ane magineti kuona
Wind Direction Sensor: Mhepo ine magineti encoder
Rudzi rweMuunganidzi wemvura: Tipping spoon, 0.01″ pamuromo (0.2 mm ine metric rain cartridge, Chikamu Nhamba 7345.319), 18.0 in2 (116 cm2) nzvimbo yekuunganidza
Tembiricha Sensor Type: ……………………………PN Junction Silicon Diode
Relative Humidity Sensor Type: …………………..Film capacitor element
Zvishandiso Zvedzimba: UV-inodzivirira ABS & ASA plastiki

Gadziridza Interval neSensor
BAR	Barometric Pressure	1 min.
HUMIDITY	Mukati Humidity	1 min
	Kunze Humidity	50 sec
	Dew Point	10 sec.
MVURA	Rainfall Amount	20 sec.
	Mvura Yedutu Nhamba	20 sec.
	Rain Rate	20 sec
TEMPERATURE	Mukati Temperature	1 min
	Kunze Tembiricha	10 sec.
	Index Yekupisa	10 sec.
	Mhepo Chill	10 sec
MHEPO	Mhepo Speed	2.5 sec.
	Wind Direction	2.5 sec.
	Kutungamira kweKumhanya Kwepamusoro	2.5 sec

 

Zvinyorwa / Zvishandiso

DAVIS 6357 Vantaguye Vue Sensor Suite [pdf] Installation Guide 6357, Vantage Vue Sensor Suite, 6357 Vantaguye Vue Sensor Suite

References

• User Manual