DAUDIN CO., LTD.
2302EN
V2.0.0
uye FATEK HMI Modbus TCP Connection
Operating Manual
1. Remote I / O Module System Configuration List
| Chikamu Nha. | Tsanangudzo | Tsanangudzo |
| GFGW-RM01N | Modbus TCP-to-Modbus RTU/ASCII, 4 Ports | Gateway |
| GFMS-RM01S | Master Modbus RTU, 1 Port | Main Controller |
| GFDI-RM01N | Digital Input 16 Channel | Dhijitari Inzwa |
| GFDO-RM01N | Digital Output 16 Channel / 0.5A | Dhijitari Kunobuda |
| GFPS-0202 | Simba 24V / 48W | Magetsi |
| GFPS-0303 | Simba 5V / 20W | Magetsi |
1.1 Chigadzirwa Tsananguro
I. Gedhi rinoshandiswa kunze kuti ribatane neFATEK HMI communication port (Modbus TCP).
II. Mutongi mukuru ari kutungamira manejimendi uye dhizaini dhizaini yeI / O paramita uye zvichingodaro.
III. Iyo magetsi module ndeyekure I / Os uye vashandisi vanogona kusarudza modhi kana mhando yemagetsi module yavanoda.
2. Gateway Parameter Settings
Ichi chikamu chinotsanangura maitiro ekubatanidza kuFATEK HMI. Kuti uwane ruzivo rwakadzama, ndapota tarisa kune -Series Product Manual
2.1 i-Designer Chirongwa Setup
I. Ita shuwa kuti module ine simba uye yakabatana kune gedhi module uchishandisa Ethernet tambo
II. Dzvanya kuti utange software
III. Sarudza "M Series Module Configuration"
IV. Dzvanya pane "Setting Module" icon
V. Pinda "Setting Module" peji yeM-series
VI. Sarudza mhando yemodhi zvichienderana neiyo yakabatana module
VII. Dzvanya pakanzi "Connect"
VIII. Gateway Module IP Zvirongwa
Ongorora: Iyo IP kero inofanirwa kunge iri munzvimbo imwechete neye controller mudziyo
IX. Gateway Module Operational Modes
Cherechedza:
Seta Boka 1 seMuranda uye isa gedhi rekushandisa yekutanga seti yeRS485 chiteshi kuti ubatanidze kune mukuru controller (GFMS-RM01N)
3. Beijer HMI Connection Setup
Ichi chitsauko chinotsanangura mashandisirwo eFvDesigner chirongwa kubatanidza FATEK HMI nayo . Kuti uwane ruzivo rwakadzama, ndapota tarisa kune FATEK FvDesigner User Manual
3.1 Beijer HMI Hardware Connection
I. Chiteshi chekubatanidza chiri kurudyi pazasi pemuchina.
II. Batanidza chiteshi pazasi pemuchina kuchiteshi chegedhi
3.2 Beijer HMI IP Kero uye Connection Setup
I. Kana HMI yave powered, dzvanya pamusoro-kurudyi nepasi-kurudyi nzvimbo paHMI sikirini kuti uise masetting menu wobva wadzvanya pakanzi “Ethernet”.
II. Dzvanya pa "Activate" uye isa "IP Kero" kune imwecheteyo domain senge gedhi domain pa192.168.1.XXX.
III. Tanga FvDesigner, vhura itsva file, sarudza peji rekutonga uye wobva wadzvanya pa "Wedzera"
IV. Kana kuti unogona kudzvanya kuti uvhure iripo file, sarudza "Project Management" peji uye wobva wadzvanya pa "Batanidza"
V. Kubatanidza nzira yekugadzirisa
A Kubva pa "Communication Interface Type" yekudonha-pasi menyu, sarudza "Batanidza zvakananga (Ethernet))"
B Kubva pa "Mugadziri" yekudonha-pasi menyu, sarudza "MODBUS IDA"
C Kubva ku "Product Series" yekudonha-pasi menyu, sarudza "MODBUS TCP"
D Isa iyo IP kero kune gedhi reiyo default IP kero
E Pinda "502" yekubatanidza chiteshi
F Seta "Chiteshi Nha." kune yakasarudzika kukosha kwegedhi
VI. Gadzirisa nzvimbo yekugara tag rejista
A Kubva pa "Chishandiso" chekudonha-pasi menyu, sarudza mudziyo kuti ubatanidzwe
B Kubva pa "Type" yekudonha-pasi menyu, sarudza "4x"
C Gadzirisa maererano nehurongwa
Example:
| IO-Grid_M kero yerejista | HMI kero inoenderana* | |
| R | 0x1000 | 4097 |
| R | 0x1001 | 4098 |
| R | 0x1000.0 | 4097.0 |
| W | 0x2000 | 8193 |
| W | 0x2001 | 8194 |
| W | 0x2000.0 | 8193.0 |
Cherechedza:
HMI inoenderana nekero ndeiyi:
yekutanga GFDI-RM01N ine kero yerejista pa1000(HEX) yakashandurwa kuita 4096(DEC)+1
yekutanga GFDO-RM01N ine kero yerejista pa2000(HEX) yakashandurwa kuita 8192(DEC)+1
About kero yerejista uye fomati, ndapota tarisa kune Kudzora Module Operating Manual
Zvinyorwa / Zvishandiso
 |
DAUDIN iO-GRID uye FATEK HMI Modbus TCP Connection [pdf] Bhuku reMirayiridzo iO-GRID uye FATEK HMI Modbus TCP Connection, FATEK HMI Modbus TCP Connection, HMI Modbus TCP Connection, Modbus TCP Connection, TCP Connection, Connection |
