Autonics TC Series TC4Y-N4R Single Display PID Temperature Controllers Instruction Manual

Verenga uye unzwisise bhuku rekuraira uye bhuku rekushandisa zvakakwana usati washandisa chigadzirwa.

Nekuchengetedza kwako, verenga uye uteedzere zviri pazasi kuchengetedza kufunga usati washandisa.

Nekuchengetedza kwako, verenga uye uteedzere zvinotariswa zvakanyorwa mubhuku rekuraira, mamwe manyoro uye Autonics website.

Chengeta bhuku rino rekuraira munzvimbo yaunogona kuwana zviri nyore.

Madimikira, zviyero, nezvimwe zvinogona kuchinjwa pasina chiziviso chekuvandudza chigadzirwa Mamwe mamodheru anogona kumiswa pasina chiziviso.

Mifungo Yekuchengetedza

• Chengetedza ese 'Safety considerations' kuitira kuchengetedzwa uye kwakaringana kushanda kudzivirira njodzi.
• ᜠchiratidzo chinoratidza kungwarira nekuda kwemamiriro akasarudzika umo njodzi dzinogona kuitika.

Yambiro Kutadza kutevedzera mirayiridzo kunogona kukonzera kukuvara kwakanyanya kana kufa

1. Mudziyo wakatadza kuchengetedzeka unofanirwa kuiswa kana uchishandisa yuniti ine michina inogona kukonzera kukuvara kwakanyanya kana kurasikirwa kukuru kwehupfumi. zvishandiso, nezvimwewo)
   Kutadza kutevedzera rairo iyi kunogona kukonzera kukuvara, kurasikirwa kwehupfumi kana moto.
2. Usashandise yuniti iri panzvimbo inobvira/inoputika/inoparadza gasi, hunyoro hwepamusoro, chiedza chezuva, kupisa kwakapenya, kuzunguzika, kukanganiswa kana munyu.
   Kutadza kutevedzera murairo uyu kunogona kukonzera kuputika kana moto.
3. Isa pane mudziyo wekushandisa kuti ushandise.
   Kutadza kutevedzera murairo uyu kunogona kukonzera moto kana kuvhunduka kwemagetsi.
4. Usabatanidze, kugadzirisa, kana kuongorora iyo unit paunenge wakabatana kune sosi yemagetsi.
   Kutadza kutevedzera murairo uyu kunogona kukonzera moto kana kuvhunduka kwemagetsi.
5. Tarisa 'Connections' usati waisa waya.
   Kutadza kutevedzera murairo uyu kunogona kukonzera moto.
6. Usabvisa kana kushandura iyo unit.
   Kutadza kutevedzera murairo uyu kunogona kukonzera moto kana kuvhunduka kwemagetsi.

Kuchenjerera Kutadza kutevedzera mirairo kunogona kukonzera kukuvara kana kukuvara kwechigadzirwa

1. Kana uchibatanidza powerinput uye relay inobuda, shandisa AWG 20 (0.50 mm2 ) tambo kana pamusoro uye simbisa siruu yemugumo ne torque inosimbisa ye 0.74 kusvika 0.90 N m. Kana uchibatanidza tambo yekupinza sensor uye yekutaurirana pasina tambo yakatsaurirwa, shandisa AWG 28 kusvika 16 tambo uye simbisa iyo terminal screw wit inosimbisa torque ye 0.74 kusvika 0.90 N m.
   Kutadza kutevedzera murairo uyu kunogona kukonzera moto kana kusashanda zvakanaka nekuda kwekutadza kubata.
2. Shandisa chikwata mukati mezvakatemerwa zvakatemwa.
   Kutadza kutevedzera murairo uyu kunogona kukonzera moto kana kukuvara kwechigadzirwa
3. Shandisa jira rakaoma kuchenesa chikwata, uye usashandise mvura kana organic solvent.
   Kutadza kutevedzera murairo uyu kunogona kukonzera moto kana kuvhunduka kwemagetsi.
4. Chengetedza chigadzirwa kure nesimbi chip, huruva, uye waya inosara inoyerera ichipinda muyuniti.
   Kutadza kutevedzera murairo uyu kunogona kukonzera moto kana kukuvara kwechigadzirwa.

Yambiro panguva yekushandisa

• Tevera mirairo mu 'Kuchenjerera panguva yekushandisa'. Zvikasadaro, zvinogona kukonzera zvisingatarisirwi
  tsaona.
• Tarisa polarity yematerminal usati waisa waya tembiricha sensor. Pamusoro peRTD
  tembiricha sensor, waya iyo se-3-waya mhando, uchishandisa tambo dzakafanana ukobvu uye kureba. Kune thermocouple (TC) temperature sensor, shandisa iyo yakatemerwa muripo waya ye
  kuwedzera waya.
• Ramba kure nehigh voltage mitsara kana tambo dzemagetsi kudzivirira inductive ruzha. Muchiitiko chekuisa tambo yemagetsi uye mutsara wekuisa chiratidzo padhuze, shandisa mutsara sefa kana muenzi patambo yemagetsi uye waya yakadzivirirwa pamutsetse wekuisa chiratidzo. Usashandise padhuze nemidziyo inogadzira simba rakasimba remagineti kana ruzha rwepamusoro.
• Isa chinja chemagetsi kana chedunhu chinotyora munzvimbo inosvikirika nyore yekugovera kana kubvisa magetsi.
• Usashandise iyo unit kune chimwe chinangwa (semuenzaniso voltmeter, ammeter), asi tembiricha controller.
• Paunenge uchishandura sensor yekupinza, dzima simba kutanga usati wachinja. Mushure mekushandura sensor yekupinza, shandura kukosha kweiyo inoenderana parameter.
• 24 VACᜠ, 24-48 VDCᜠ magetsi anofanirwa kuve akavharirwa uye mashoma vol.tage/yazvino kana Kirasi 2, SELV magetsi ekupa mudziyo.
• Ita nzvimbo inodiwa yakapoteredza unitforradiation yekupisa. Kuti uite kuyerwa kwetembiricha kwakaringana, dziisa iyo unit pamusoro pe20 min mushure mekupisa pamagetsi.
• Ita shuwa kuti magetsi ekupa voltage inosvika kune yakarongwa voltage mukati me2 sec mushure mekupa simba.
• Usaisa waya kumaterminals asina kushandiswa.
• Ichi chikwata chinogona kushandiswa munzvimbo dzinotevera.
  • Mumba (mumamiriro ekunze akaiswa mu 'Specifications')
  • AltitudeMax. 2,000 m
  • Dhigirii rekusvibisa 2
  • Kuisa chikamu II

Kuraira Ruzivo

Izvi ndezvekutarisa chete, chigadzirwa chaicho hachitsigire masanganiswa ese. Pakusarudza iyo yakatsanangurwa modhi, tevera iyo Autonics website .

1. Size
   S: DIN W 48× H 48 mm
   SP: DIN W 48× H 48 mm (11 pin plug type)
   Y: DIN W 72× H 36 mm
   M: DIN W 72× H 72 mm
   H: DIN W 48× H 96 mm
   W: DIN W 96× H 48 mm
   L: DIN W 96× H 96 mm
2. Alarm output
   N:Hapana alarm
   1. 1 alarm
   2.  2 alarm
3. Magetsi
   2: 24VACᜠ 50/60Hz, 24-48 VDCᜠ
   4: 100-240 VACᜠ50/60 Hz
4. Kudzora kubuda
   N: Indicator - pasina kudzora kubuda
   R: Relay + SSR drive

Zvigadzirwa Zvikamu

• Product
• Bracket
• Chinyorwa chemirayiridzo

Kutengeswa Zvakaparadzana

• 11 pini socket: PG-11, PS-11 (N)
• Terminal kudzivirira chivharo: RSA / RMA / RHA / RLA Kavha

Zvinotsanangurwa

Series		TC4 □- □2 □	TC4 □- □4 □
Simba supply		24 VACᜠ 50/60 Hz ±10%24-48 VDCᜡ ±10%	100 - 240 VACᜠ 50/60 Hz ±10%
Simba kushandiswa		AC: ≤ 5 VA, DC: ≤ 3 W	≤ 5 VA
Sampling period		100 ms
Input tsanangudzo		Tarisa kune 'Input Type uye Kushandisa Range'.
Kudzora output	Relay	250 VACᜠ 3 A, 30 VDCᜡ 3 A, 1a
	SSR	12 VDCᜡ±2 V, ≤ 20 mA
Alarm output		250 VACᜠ 1 A 1a
Display type		7 Segment (tsvuku, girini, yero), LED mhando
Kudzora type	Kudziya, Kutonhora	ON/OFF, P, PI, PD, PID Control
Hysteresis		1 kusvika 100 (0.1 kusvika 50.0) ℃/℉
Proportional band (P)		0.1 kusvika 999.9 ℃/℉
Integral nguva (I)		0 kusvika 9,999 sec
Derivative nguva (D)		0 kusvika 9,999 sec
Kudzora cycle (T)		0.5 kusvika 120.0 sec
Manual reset		0.0 kusvika 100.0%
Relay hupenyu cycle	Mechanical	OUT1/2, AL1/2: ≥ 5,000,000 mashandiro
	Zvemagetsi	OUT1/2: ≥ 200,000 mashandiro (mutoro kuramba: 250 VACᜠ 3A) AL1/2: ≥ 300,000 mashandiro (mutoro kuramba: 250 VACᜠ 1 A)
Dielectric simba		Pakati pekuisa terminal uye magetsi terminal: 1,000 VACᜠ 50/60 Hz kwe1 min.	Pakati pekuisa terminal uye magetsi terminal: 2,000 VACᜠ 50/60 Hz 1 min.
Vibration		0.75 mm amplitude pafrequency 5 kusvika 55Hz (ye1 min) mune yega yega X, Y, Zdirection kwemaawa maviri
Insulation resistance		≥100 MΩ (500 VDCᜡ megger)
Noise immunity		Ruzha rwakaita denderedzwa (pulse hupamhi: 1 ㎲) neruzha simulator ± 2 kV R-chikamu, S-chikamu
Memory kuchengetedza		≈ 10 makore (isina-volatile semiconductor memory type)
Ambient tembiricha		-10 kusvika 50 ℃, kuchengetedza: -20 kusvika 60 ℃ (hapana kutonhora kana condensation)
Ambient humidity		35 kusvika 85% RH, kuchengetedza: 35 kusvika 85% RH (hapana chando kana condensation)
Insulation type		Maka: ▱, yakapetwa kaviri kana yakasimbisa insulation (simba redielectric pakati peyekuyeresa yekupinda chikamu nechikamu chemagetsi: 1 kV)	Maka: ▱, yakapetwa kaviri kana yakasimbisa insulation (simba redielectric pakati peyekuyeresa yekupinda chikamu nechikamu chemagetsi: 2 kV)
Mvumo		ᜢ ᜧ ᜫ
Unit uremu (package)		TC4S: ≈ 94 g (≈ 141 g)	TC4SP: ≈ 76 g (≈ 123 g)
		TC4Y: ≈ 85 g (≈ 174 g)	TC4M: ≈ 133 g (≈ 204 g)
		TC4W: ≈ 122 g (≈ 194 g)	TC4H: ≈ 122 g (≈ 194 g)
		TC4L: ≈ 155 g (≈ 254 g)

Input Type uye Kushandisa Range

Input type		Decimalpoint	Display	Kushandisa range (℃)			Kushandisa range (℉)
Thermo-couple	K (CA)	1	KC	-50	ku	1,200	-58	ku	2,192
	J (IC)	1	JIC	-30	ku	500	-22	ku	932
	L (IC)	1	LIC	-40	ku	800	-40	ku	1,472
RTD	Cu50 Ω	1	CU	-50	ku	200	-58	ku	392
		0.1	CU L	-50.0	ku	200.0	-58.0	ku	392.0
	Dpt100 Ω	1	DPt	-100	ku	400	-148	ku	752
		0.1	DptL	-100.0	ku	400.0	-148.0	ku	752.0

Ratidza kururama

Input type	Kushandisa tembiricha	Display kururama
Thermo-coupleRTD	Pane tembiricha yemumba(23℃ ±5 ℃)	(PV ±0.5% kana ±1 ℃ yepamusoro imwe) ±1-manhamba  Thermocouple L, RTD Cu50 Ω:(PV ±0.5% kana ±2 ℃ yepamusoro imwe) ±1-manhamba
	Kunze kwekamuri tembiricha	(PV ±0.5% kana ±2 ℃ yepamusoro imwe) ±1-manhamba Thermocouple L, RTD Cu50 Ω:(PV ±0.5% kana ±3 ℃ yepamusoro imwe) ±1digit

• Kana iri TC4SP Series, ± 1 ℃ ichawedzerwa.
• Kana iyo yekuisa yakatarwa yakaiswa ku 'decimal point 0.1' kuratidza, wedzera ± 1 ℃ nehuchokwadi mwero.

Tsanangudzo dzeChikwata

1. Tembiricha Ratidza chikamu (Red)
   • Run modhi: Inoratidza PV (yazvino kukosha).
   • Setting mode: Inoratidza parameter zita,
2. chiratidzo
3. Input kiyi

Display	Zita
[MODE]	Mode kiyi
[◀], [▼], [▲]	Kuseta kukosha kwekudzora kiyi

 

Display	Zita	Tsanangudzo
▲■▼	Kutsauka	Ratidza PV kutsauka kubva paSV (Setting value) neLED.▲: VANOITA kana kutsauka kwapera ＋2 ℃■: VAKADZIDZA kana kutsauka kuri mukati me ±2 ℃▼: VAKAITA kana kutsauka kuri pasi pe －2 ℃Flash panguva ye auto tuning sekondi imwe yega
SV	Kuisa kukosha	Inobatidza kana SV ichiratidzwa pane tembiricha inoratidza chikamu.
℃, ℉	Tembiricha unit	Inoratidza yakasarudzwa unit (parameter).
AL1/2	Alarm output	Inobatidza kana aramu yega yega yabuda.
OUT	Kudzora kubuda	Inobatidza kana control yakabuda.• CYCLE/PHASE control yeSSR drive output: Inobatidza kana MV yadarika 3.0%. (chete ye AC simba modhi)

Zvikanganiso

Display	Tsanangudzo	Kugadzirisa matambudziko
Vhura	Inopenya kana sensor yekupinza ikabviswa kana sensor isina kubatana.	Tarisa chimiro che sensor yekupinda.
	Inopenya kana PV yakakwira kupfuura renji yekupinza.	Kana kupinza kuri mukati meiyo yakayerwa nhanho, chiratidziro ichi chinonyangarika.
Llll	Inopenya kana PV yakadzikira pane yekuisa renji.

Dimensions

• Yuniti: mm, Kudhirowa kwakadzama, tevera iyo Autonics website.
• Pazasi panobva paTC4S Series.
  
  

Series	Muviri					Panel cut-out
	A	B	C	D	E	F	G	H	I
TC4S	48	48	6	64.5	45	≥ 65	≥ 65	45+0.60	45+0.60
TC4SP	48	48	6	72.2	45	≥ 65	≥ 65	45+0.60	45+0.60
TC4Y	72	36	7	77	30	≥ 91	≥ 40	68+0.70	31.5+0.50
TC4W	96	48	6	64.5	44.7	≥ 115	≥ 65	92+0.80	45+0.60
TC4M	72	72	6	64.5	67.5	≥ 90	≥ 90	68+0.70	68+0.70
TC4H	48	96	6	64.5	91.5	≥ 65	≥ 115	45+0.60	92+0.80
TC4L	96	96	6	64.5	91.5	≥ 115	≥ 115	92+0.80	92+0.80

Bracket 

Installation Method

TC4S

Flathead screwdriver

TC4Y

Crosshead screwdriver

Zvimwe zvakateedzana

Flathead screwdriver

Isa chigadzirwa papanera nebhuraketi, sunda ditto museve nzira uchishandisa screw driver.

Kana iri TC4Y Series, sunga mabhaudhi.

Crimp Terminal Specifications

• Unit: mm, Shandisa crimp terminal yekutevera chimiro

Wire ferrule

Fork crimp terminal

Round crimp terminal

Connections

• TC4S
  
• TC4SP
  
• TC4Y
  
• TC4W
  
• TC4M
  
• TC4H/L
  

Mode Setting

Parameter Setting

• Mamwe ma paramita anobatiswa/anodzimwa zvichienderana nemuenzaniso kana kusetwa kwemamwe ma parameter. Tarisa kune tsananguro yechinhu chimwe nechimwe.
• Kurongeka mumaparenthesi ndekwekushandisa decimal point ratidziro mune zvakaiswa.
• Kana pasina kiyi yekuisa kweanopfuura masekonzi makumi matatu mune yega yega parameter, inodzokera kuRUN modhi.
• Paunenge uchidzvanya kiyi ye [MODE] mukati mesekondi 1 mushure mekudzoka kumaitiro ekushanda kubva kuboka reparameter, ichapinda muboka reparameter isati yadzoka.
• [MODE] kiyi: Inochengetedza ikozvino parameter yekuisa kukosha uye inoenda kune inotevera paramende. [◀] kiyi: Inofambisa koramu kana ichichinja kukosha kweseti [▲], [▼] makiyi: Inosarudza parameter / Inoshandura kukosha kweseti.
• Inokurudzirwa kurongeka kweparameta: Parameta 2 boka → Parameta 1 boka → SV kuseta maitiro ■ Parameta 1 boka
• Inongoonekwa chete pane control output modhi

Parameter		Display	Default	Setting range	Condition
1-1	AL1 alarm tembiricha	L	250	Aramu yekutsauka: -FS kuenda kuFS ℃/℉ Mhedziso kukosha alarm: mukati	2-12/14AL1/2 aramu kushanda: AM1 kusvika AM6
1-2	AL2 alarm tembiricha	L2	250	[2 alarm yekubuda modhi] Zvakafanana ne1-1 AL1 alarm tembiricha
1-3	Auto tuning	T	DZIMA	DZIMA: Mira, ON: Kuuraya	2-8 Kudzora rudzi: PID
1-4	Proportionalband	P	0 )0	0.1 kusvika 999.9 ℃/℉
1-5	Integral nguva	I	0000	0 (OFF) kusvika ku9999 sec
1-6	Derivativetime	D	0000	0 (OFF) kusvika ku9999 sec
1-7	Manual reset	ZORORA	05)0	0.0 kusvika 100.0%	2-8 Kudzora mhando: PID & 1-5 Integraltime: 0
1-8	Hysteresis	YS	002	1 kusvika 100 (0.1 kusvika 50.0) ℃/℉	2-8 Kudzora mhando: ONOF

Parameter 2 boka

Muchiitiko chechiratidzo chemuenzaniso, inongowanikwa 2-1 kusvika 4 / 2-19 parameters

Parameter		Display	Default	Setting range		Condition
2-1	Inputsspecification 01)	IN-T	KC	Tarisa kune 'Input Type uye Kushandisa Range'.		-
2-2	Tembiricha unit 01)	UNIT	?C	℃, ℉		-
2-3	Input correction	IN-B	0000	-999 kusvika 999 (-199.9 kusvika 999.9) ℃/℉		-
2-4	Input digitalfilter	M F	00)	0.1 kusvika 120.0 sec		-
2-5	SV yakaderera muganho 02)	L-SV	-050	Mukati me 2-1 yezvataurwa: Kushandisa renji, L-SV ≤ H-SV - 1-digit ℃/℉ H-SV ≥ L-SV + 1-digit ℃/℉		-
2-6	SV yakakwirira muganho 02)	-SV	200			-
2-7	Kudzora maitiro ekubuda	O-FT	ET	KUTISA: Kupisa, KUPORA: Kutonhodza		-
2-8	Kudzora mhando 03)	C-MD	PID	PID, ONOF: ON/OFF		-
2-9	Kudzora kubuda	OUT	RLY	RLY: relay, SSR		-
2-10	SSR drive inobuda mhando	SSrM	STND	[AC voltage modhi]STND: chiyero, CYCL: kutenderera, PHAS:chikamu		2-9 Controloutput: SSR
2-11	Kudzora kutenderera	T	02)0	0.5 kusvika 120.0 sec		2-9 Controloutput: RLY2-10 SSR drive kubuda mhando: STND
			00 0			2-9 Controloutput: SSR2-10 SSR drive kubuda mhando: STND
2-12	AL1 alarm operation 04)	L-	M! □››.■	□ □ □ AM0: OffAM1: Kutsauka kwemuganho wearamu AM2: Kutsauka yakaderera muganhu alarmAM3: Kutsauka kumusoro, yakaderera muganho alarm AM4: Kutsauka pakakwirira, yakaderera reverse alarm AM5: Mhedziso kukosha yakakwirira muganhu alarm AM6: Mhedziso kukosha yakaderera muganhu alarm SBA: Sensor break. alarmLBA: Loop break alarm (LBA)		-
2-13	AL1 alarm sarudzo			■ A: Aramu yenguva dzoseC: Kutevedzana kwakamirira 1E: Kutevedzana kwakamira 2	B: Alarm latchD: Latch yearamu nekutevedzana kwekumirira 1F: Latch yearamu nekutevedzana kwekumira 2	-
				• Pinda kugadziriro yesarudzo: Dzvanya [◀] keyin 2-12 AL-1 alarm operation.
2-14	AL2 alarm operation 04)	L-2	M	[2 alarm yekubuda modhi] Zvakafanana ne 2-12 / 13 AL1 alarm mashandiro / sarudzo		-
2-15	AL2 alarm sarudzo
2-16	Alarm inobuda hysteresis	YS	000	1 kusvika 100 (0.1 kusvika 50.0) ℃/℉		2-12/14AL1/2 aramu kushanda: AM1 kusvika 6
2-17	LBA nguva	LBaT	0000	0 (OFF) kusvika 9,999 sec kana otomatiki (otomatiki tunning)		2-12/14AL1/2 aramu kushanda: LBA
2-18	LBA bhendi	LBaB	002	0 (OFF) kusvika 999 (0.0 kusvika 999.9) ℃/℉ orauto (auto tunning)		2-12/14AL1/2 aramu kushanda: LBA & 2-17 LBAnguva: ＞ 0
2-19	Digital inputkey	DI-K	MIRA	MIRA: Misa kudzora kubuda, AL.RE: Alarm reset, AT*: Auto tuning execution, ZIMA		* 2-8 Kudzora mhando: PID
2-20	Sensor kukanganisa MV	ErMV	00)0	0.0: DZIMA, 100.0: ON		2-8 Kudzora mhando: ONOF
				0.0 kusvika 100.0%		2-8 Kudzora rudzi: PID
2-21	Lock	LOC	DZIMA	OFFLOC1: Parameter 2 boka kukiya LOC2: Parameter 1/2 Boka kukiyaLOC3: Parameter 1/2 Boka, SV kukiya		-
				[Indicator modhi]OFFLOC1: Parameter 2 kukiya boka
Parameter		Display	Default	Setting range		Condition
2-1	Inputsspecification 01)	IN-T	KC	Tarisa kune 'Input Type uye Kushandisa Range'.		-
2-2	Tembiricha unit 01)	UNIT	?C	℃, ℉		-
2-3	Input correction	IN-B	0000	-999 kusvika 999 (-199.9 kusvika 999.9) ℃/℉		-
2-4	Input digitalfilter	M F	00)	0.1 kusvika 120.0 sec		-
2-5	SV yakaderera muganho 02)	L-SV	-050	Mukati me 2-1 yezvataurwa: Kushandisa renji, L-SV ≤ H-SV - 1-digit ℃/℉ H-SV ≥ L-SV + 1-digit ℃/℉		-
2-6	SV yakakwirira muganho 02)	-SV	200			-
2-7	Kudzora maitiro ekubuda	O-FT	ET	KUTISA: Kupisa, KUPORA: Kutonhodza		-
2-8	Kudzora mhando 03)	C-MD	PID	PID, ONOF: ON/OFF		-
2-9	Kudzora kubuda	OUT	RLY	RLY: relay, SSR		-
2-10	SSR drive inobuda mhando	SSrM	STND	[AC voltage modhi]STND: chiyero, CYCL: kutenderera, PHAS:chikamu		2-9 Controloutput: SSR
2-11	Kudzora kutenderera	T	02)0	0.5 kusvika 120.0 sec		2-11Kudzora: RLY2-12 SSR drive kubuda mhando: STND
			00 0			2-11Kudzora: SSR2-12 SSR drive kubuda mhando: STND
2-12	AL1 alarm operation 04)	L-	M! □››.■	□ □ □ AM0: OffAM1: Kutsauka kwemuganho wearamu AM2: Kutsauka yakaderera muganhu alarmAM3: Kutsauka kumusoro, yakaderera muganho alarm AM4: Kutsauka pakakwirira, yakaderera reverse alarm AM5: Mhedziso kukosha yakakwirira muganhu alarm AM6: Mhedziso kukosha yakaderera muganhu alarm SBA: Sensor break. alarmLBA: Loop break alarm (LBA)		-
2-13	AL1 alarm sarudzo			■ A: Aramu yenguva dzoseC: Kutevedzana kwakamirira 1E: Kutevedzana kwakamira 2	B: Alarm latchD: Latch yearamu nekutevedzana kwekumirira 1F: Latch yearamu nekutevedzana kwekumira 2	-
				• Pinda kugadziriro yesarudzo: Dzvanya [◀] keyin 2-12 AL-1 alarm operation.
2-14	AL2 alarm operation 04)	L-2	M	[2 alarm yekubuda modhi] Zvakafanana ne 2-12 / 13 AL1 alarm mashandiro / sarudzo		-
2-15	AL2 alarm sarudzo
2-16	Alarm inobuda hysteresis	YS	000	1 kusvika 100 (0.1 kusvika 50.0) ℃/℉		2-12/14AL1/2 aramu kushanda: AM1 kusvika 6
2-17	LBA nguva	LBaT	0000	0 (OFF) kusvika 9,999 sec kana otomatiki (otomatiki tunning)		2-12/14AL1/2 aramu kushanda: LBA
2-18	LBA bhendi	LBaB	002	0 (OFF) kusvika 999 (0.0 kusvika 999.9) ℃/℉ orauto (auto tunning)		2-12/14AL1/2 aramu kushanda: LBA & 2-17 LBAnguva: ＞ 0
2-19	Digital inputkey	DI-K	MIRA	MIRA: Misa kudzora kubuda, AL.RE: Alarm reset, AT*: Auto tuning execution, ZIMA		* 2-8 Kudzora mhando: PID
2-20	Sensor kukanganisa MV	ErMV	00)0	0.0: DZIMA, 100.0: ON		2-8 Kudzora mhando: ONOF
				0.0 kusvika 100.0%		2-8 Kudzora rudzi: PID
2-21	Lock	LOC	DZIMA	OFFLOC1: Parameter 2 boka kukiya LOC2: Parameter 1/2 Boka kukiyaLOC3: Parameter 1/2 Boka, SV kukiya
				[Indicator modhi] KUBVA LOC1: Parameter 2 boka kukiya

1. Pazasi ma paramita anotangwa kana kukosha kwekuseta kwachinjwa
   • Parameter 1 boka: AL1/2 alarm tembiricha
   • Parameter 2 boka: Kugadziriswa kwekuisa, SV yakakwirira / yakaderera muganho, Alarm inobuda hysteresis, Blaine, Laban
   • SV kuseta modhi: SV
2. IASIS yakaderera / yakakwira kupfuura yakaderera / yakakwira muganho kana kukosha kwashandurwa, SVS yakachinjirwa kune yakaderera / yakakwirira muganho kukosha. Kana 2-1 Input yakatarwa ikashandurwa, kukosha kunoshandurwa kuita Min./Max. kukosha kweInput specification.
   1. Kana uchichinja kukosha kubva kuPID kuenda kuONOF, kukosha kwega kwega kwekutevera parameter kunoshandurwa. 2-19 Digital yekupinza kiyi: DZIMA, 2-20 Sensor kukanganisa MV: 0.0 (Kana kuseta kukosha kwakaderera pane 100.0)
   2. 1-1 / 2 AL1, AL2 alarm tembiricha yekumisikidza tsika inotangwa kana kukosha kwekuisa kwachinjwa.

18, Bansong-ro 513Beon-gil, Haeundae-gu, Busan, Republic of Korea, 48002

www.autonics.com | +82-2-2048-1577 | sales@autonics.com

Zvinyorwa / Zvishandiso

Autonics TC Series TC4Y-N4R Single Display PID Temperature Controllers [pdf] Bhuku reMirayiridzo TC Series TC4Y-N4R Single Display PID Temperature Controllers, TC Series, TC4Y-N4R Single Display PID Temperature Controllers, PID Temperature Controllers, Temperature Controllers.

References

• User Manual