ATOMSTACK A12 Pro Laser Engraving Machine User Manual

1. Nhanganyaya

This manual provides detailed instructions for the safe and efficient operation of your ATOMSTACK A12 Pro Laser Engraving Machine. Please read this manual thoroughly before use to ensure proper setup, operation, and maintenance. Keep this manual for future reference.

Yambiro Yekuchengetedza:

Always wear UV-filtering eye protection when operating the laser engraver.
Ensure proper ventilation to dissipate fumes and smoke generated during engraving/cutting.
Usasiya muchina usina kutarisirwa panguva yekushanda.
Chengetedza zvinhu zvinopisa kubva panzvimbo yekushanda.
Familiarize yourself with the emergency stop button location.

2. Package Zviri mukati

Tarisa kuti zvinhu zvese zvakanyorwa pazasi zvinosanganisirwa mupakeji yako:

ATOMSTACK A12 Pro Laser Engraving Machine and accessories

Figure 2.1: ATOMSTACK A12 Pro Laser Engraving Machine and included accessories.

ATOMSTACK A12 Pro Laser Engraving Machine (Unibody Frame)
Laser Head
Adapter yemagetsi (24V, 5A)
Power Cable
USB Cable (Rudzi-C)
Goggles (UV-filtering eye protection)
Fixed Focus Lens
User Manual
Tools (H3 hexagon L-shaped wrench, M4 thumb screws)
Flash Drive
WiFi Antenna
Silicone Hose (air hose)
Wire Anchor
Cable Clamp
100*30 lint free cloth
Slider
Switch Key

3. Setup Guide

The ATOMSTACK A12 Pro features an unibody design for minimal assembly. Follow these steps to get started:

Unboxing: Carefully remove the machine and all accessories from the packaging. The machine is pre-calibrated and shipped as a single unit.
Figure 3.1: The ATOMSTACK A12 Pro is ready to use right out of the box with its unibody design.
Install the Slider: Attach the slider component to the designated rail on the machine. Secure it with the provided screws.
Isa Musoro weLaser: Mount the laser head onto the slider. Ensure it is firmly attached.
Install the WiFi Antenna: Screw the WiFi antenna into its port on the machine's side.
Install Tubing and X-axis Link Lines: Connect the tubing and X-axis link lines as shown in the diagram to ensure proper cable management and operation.
Batanidza Simba uye USB: Plug the power adapter into the machine and a power outlet. Connect the USB cable from the machine to your computer.
Power On: Insert the switch key and turn it to the ON position. The machine is now ready for software setup.

Video 3.1: A detailed guide on how to install and set up the ATOMSTACK laser engraver.

4. Operating Instructions

4.1 Software Control

The ATOMSTACK A12 Pro supports multiple control methods:

ATOMSTACK PC Software: Exclusive software for simplified operation, ideal for beginners.
LightBurn & LaserGRBL: Traditional PC software for advanced users.
ATOMSTACK Mobile APP: Available on Android and Apple App Stores for WiFi control via smartphone.

Diverse control methods for ATOMSTACK A12 Pro

Mufananidzo 4.1: Kupfuuraview of the various software and app control options for the laser engraver.

4.2 Engraving Process

Kuiswa kwezvinhu: Place your material flat on the engraving bed.
Focus Adjustment: Use the fixed-focus design for rapid and precise focusing in approximately 10 seconds.
Cross Positioning: Utilize the newly added cross laser positioning feature for clear visibility of the laser's location, ensuring perfect alignment for engraving and easy horizontal adjustment.

Cross positioning system for precise engraving

Figure 4.2: The cross positioning system helps align objects and lock to edges for precise horizontal carving.

Software Settings: Adjust engraving parameters (speed, power, passes) in your chosen software based on the material.
Tanga Engraving: Initiate the engraving process from the software.

5. Features & Capabilities

Unibody Design: Sturdy all-aluminum unibody design, installation-free and pre-calibrated.
High Speed & Precision: New dual-axis linear guide rail structure and high-speed motherboard allow engraving speeds up to 600mm/s, 3-6 times faster than traditional frame machines. Accuracy within 0.004 inches.

Amazing working speed of ATOMSTACK A12 Pro

Figure 5.1: Comparison showing the significantly faster engraving speed of the A12 Pro.

Simba Laser: 12000mW diode laser (Laser Class 4) with 50W machine power and a 0.05*0.06mm ultra-fine laser spot focus.
Thicker Cuts: Can cut through 8mm wood, 5mm black acrylic, and 0.02mm stainless steel in a single pass.

Figure 5.2: Demonstrates the maximum cutting thickness for various materials with the A12 Pro.

Diverse Material Compatibility: Engraves and cuts a wide range of materials including wood, acrylic, metal, glass, ceramics, leather, paper, cardboard, and more.

Diverse materials compatible with ATOMSTACK A12 Pro

Mufananidzo 5.3: Examples of various materials that can be engraved or cut by the machine.

Automatic Power Failure Recovery: Memorizes engraving position and swiftly resumes from the paused point, ensuring uninterrupted production and material saving.
Enhanced Security: Equipped with 4-way limit switches, UV-filtering eye protection, a tilt detector with a 15-degree alarm, and an emergency stop button.

6. Kuchengeta

Kuchenesa Lens: Regularly clean the laser lens with the provided lint-free cloth to maintain optimal performance and prevent residue buildup.
Kuzora Njanji: Periodically apply a small amount of lubricant to the guide rails to ensure smooth movement of the laser head.
Kubviswa kwemarara: Keep the engraving bed and surrounding area free of debris and dust. Use an air compressor or brush to clear away small particles.
Firmware Dzokorora: Check the official ATOMSTACK website periodically for firmware updates to ensure your machine has the latest features and bug fixes.

7. Kugadzirisa matambudziko

Dambudziko	Zvinogona Kukonzera	Solution
Muchina usingabatike	Power cable loose; Emergency stop engaged; Key not turned.	Check power connections; Disengage emergency stop; Turn key to ON.
Laser not firing/weak output	Lens dirty; Incorrect focus; Low power setting in software.	Clean laser lens; Adjust focus; Increase power setting.
Engraving is distorted/inaccurate	Loose belts/rails; Material shifting; Incorrect software settings.	Check and tighten belts/rails; Secure material; Verify software settings.
Software not connecting to machine	USB cable issue; Driver not installed; Incorrect COM port.	Try different USB port/cable; Install drivers; Select correct COM port in software.

8. Zvinotsanangurwa

Zviyero zvechigadzirwa: 23.22 x 23.22 x 7.08 inches
Chinhu Weight: 18.74 makirogiramu
Laser Output Power: 12000mW (12W)
Machine Power: 50W
Saizi yeLaser Spot: 0.05*0.06mm
Engraving Speed: Kusvika ku600mm/s
Kururama: Within 0.004 inches
Kubatana: USB, WiFi (via Mobile APP)
Inotsigirwa Software: ATOMSTACK PC Software, LightBurn, LaserGRBL
Mugadziri: Shenzhen AtomStack Technologies Co., Ltd.
Nyika Yekwakabva: China

9. Warranty uye Tsigiro

Your ATOMSTACK A12 Pro Laser Engraving Machine comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or visit the official ATOMSTACK website.

Our professional technical and support teams are available 24/7 to answer any questions or concerns you may have.

	AtomStack Studio Software User Manual Gwaro rakakwana remushandisi reAtomStack Studio software, inovhara kurodha, kuisirwa, kubatana kwechishandiso, zvigadziriso, dhizaini yeprojekiti, engraving parameter marongero, zvirongwa zvezvinhu, laser kufamba, engraving nzvimbo pre.view, kutanga kunyora, kupedzisa mapurojekiti, kuenzanisa kamera, uye kuyedzwa kwezvinhu.
	ATOMSTACK P7 Series Laser Engraver Installation Manual Yakakwana yekumisikidza bhuku reATOMSTACK P7 Series Laser Engraver, inotsanangura kuchengetedzwa kwekuchengetedza, matanho egungano, uye nhungamiro yekushandisa chigadzirwa. Dzidza maitiro ekumisikidza zvakachengeteka uye kushandisa yako laser engraving muchina.
	Bhuku reMushandisi reAtomStack Swift: Kugadzirisa, Kuisa, uye Gwaro reSoftware Bhuku rekushandisa rakakwana reAtomStack Swift laser engraver, rinosanganisira runyorwa rwezvikamu, kuiswa, kugadzwa kwesoftware neAtomStack Studio neLightBurn, uye gwara rekushandisa. Rinosanganisira kugadzirisa matambudziko neruzivo rwekuonana.
	Bhuku rekushandisa reATOMSTACK A5/A10/A20 PRO V2 Laser Engraver Bhuku rekushandisa rakakwana reATOMSTACK A5, A10, uye A20 PRO V2 laser engravers, rinosanganisira kuchengetedzeka, mirairo yekubatanidza, kugadzika kwesoftware (LightBurn, LaserGRBL), mashandiro, kugadzirisa, uye kugadzirisa matambudziko.
	AtomStack Swift Mini User Manual Comprehensive user manual for the AtomStack Swift Mini laser engraver, detailing parts, assembly, setup, software connection (AtomStack Studio, LightBurn), and operational guidance.
	ATOMSTACK A5 Pro Laser Engraving Machine Manual Yakazara mushandisi bhuku reiyo ATOMSTACK A5 Pro laser engraving muchina, inovhara kuchengetedza, kuisirwa software (LaserGRBL uye LightBurn), kushanda, uye kugadzirisa matambudziko.