Nhanganyaya
This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your Omcan 11387 14-Inch Conveyor Belt Infrared Toaster Oven. Please read this manual thoroughly before using the appliance and retain it for future reference. This commercial oven is designed for toasting various food items such as pizzas, bread, and bagels in professional kitchen environments.
Ruzivo Rwakakosha Chekuchengetedza:
- Always ensure the appliance is properly grounded.
- Usashandise ovheni netambo kana chivharo chakakuvara.
- Keep hands and foreign objects away from the conveyor belt and heating elements during operation.
- Allow the oven to cool completely before cleaning or performing maintenance.
- This appliance generates high temperatures. Exercise caution to prevent burns.
Gadzirira
Kuburitsa
Carefully remove the oven from its packaging. Inspect the appliance for any shipping damage. Report any damage immediately to the carrier and your supplier. Retain all packaging materials for inspection.
Placement
Place the oven on a stable, level, and heat-resistant surface. Ensure adequate clearance around the oven for proper ventilation. Do not block the air vents. Maintain a safe distance from walls and other equipment to prevent heat buildup.
Kubatana kweMagetsi
This appliance requires a dedicated electrical circuit. Verify that the power supply matches the specifications listed on the product label and in the specifications section of this manual.
- Voltage: 240V
- Frequency: 60Hz
- Chikamu: 1Ph
- Amphasha: 15 Amps
- Simba: 3.6 kW
- Outlet Type: NEMA 6-20 Outlet required
Consult a qualified electrician if you are unsure about your electrical supply.
Kutanga Kuchenesa
Before first use, wipe down all surfaces of the oven, including the conveyor belt, detachable tray, and drip pan, with a damp cloth and mild detergent. Rinse thoroughly and dry completely. This removes any manufacturing residues.
Mufananidzo 1: Mberi view of the Omcan 11387 conveyor toaster oven, showing the conveyor belt entrance and exit, and the control panel on the right side.
Operating Instruction
Kudzora Panel Pamusoroview
The control panel is located on the right side of the oven and features three rotary dials and a power switch.
Figure 2: Close-up of the control panel, displaying dials for Conveyor Speed, Top Heat, Bottom Heat, and the main Power Switch.
- Kudhaira Nekukurumidza KweConveyor: Adjusts the speed of the conveyor belt. 'DARK' settings correspond to slower speeds (longer cooking time), while 'LIGHT' settings correspond to faster speeds (shorter cooking time).
- Top Heat Dial: Controls the intensity of the upper infrared heating elements. Settings range from 0 to 10.
- Bottom Heat Dial: Controls the intensity of the lower infrared heating elements. Settings range from 0 to 10.
- Simba Chinja: Toggles the oven's power ON or OFF.
Preheating
- Ensure the oven is plugged into the correct electrical outlet.
- Turn the Power Switch to the 'ON' position.
- Set the Top Heat and Bottom Heat dials to your desired cooking temperature (e.g., 7-8 for most items).
- Allow the oven to preheat for approximately 10-15 minutes. The infrared heaters will reach temperatures between 158°F (70°C) and 500°F (260°C).
Kubika
- Once preheated, place food items directly onto the conveyor belt at the entrance.
- Adjust the Conveyor Speed dial to achieve the desired level of toasting or cooking. Slower speeds result in darker, more thoroughly cooked items.
- Monitor the cooking process. Adjust heat and speed settings as needed for different food types and desired results.
- Cooked items will exit the oven automatically onto the detachable tray.
Kugona The oven can process approximately nineteen 12-inch pizzas per hour or twenty-five 9-inch pizzas per hour, depending on settings and desired doneness.
Mufananidzo 3: Mukati view of the oven, highlighting the wire mesh conveyor belt and the infrared heating elements above and below.
Figure 4: The conveyor belt mechanism partially extended from the oven, illustrating its design for easy cleaning and maintenance.
Maintenance
Warning: Always unplug the oven and allow it to cool completely before cleaning or performing any maintenance.
Daily Cleaning
- Kunze: Wipe down the stainless steel exterior with a damp cloth and mild, non-abrasive cleaner. Dry thoroughly to prevent water spots.
- Detachable Tray & Drip Pan: Remove the detachable tray and drip pan. Wash them with warm, soapy water, rinse, and dry completely. These components are designed for easy removal and cleaning.
Figure 5: The removable drip pan, designed to collect crumbs and food debris for easy cleaning.
- Conveyor Belt: The conveyor belt can be carefully wiped down. For thorough cleaning, it may be partially removed or accessed as shown in Figure 4. Use a brush to remove stubborn food particles.
Kuongorora Nguva Dzose
- Nguva nenguva tarisa tambo yemagetsi pane chero zviratidzo zvekukuvadza.
- Ensure all control knobs are securely attached and function smoothly.
- Inspect the heating elements for any visible damage or excessive buildup.
Kugadzirisa matambudziko
This section addresses common issues you might encounter with your Omcan conveyor toaster oven. If the problem persists after attempting these solutions, please contact customer support.
| Dambudziko | Zvinogona Kukonzera | Solution |
|---|---|---|
| Ovheni haibatike | Hapana magetsi Switch yemagetsi AKADZIMWA | Check if the oven is properly plugged in. Verify the circuit breaker. Ensure the Power Switch is in the 'ON' position. |
| Ovheni isingadzise | Heat dials set to 0 Kukanganisa kupisa chinhu | Ensure Top Heat and Bottom Heat dials are set to a desired level. If still no heat, contact customer support. |
| Conveyor belt not moving | Conveyor speed dial set to 0 Obstruction on belt Kusashanda zvakanaka kwemota | Adjust the Conveyor Speed dial. Check for and remove any obstructions. If the issue persists, contact customer support. |
| Chikafu chisina kubikwa zvakaenzana | Incorrect heat settings Incorrect conveyor speed | Adjust Top Heat and Bottom Heat dials. Experiment with different Conveyor Speed settings to find the optimal balance for your food item. |
Zvinotsanangurwa
The following table outlines the key technical specifications for the Omcan 11387 Conveyor Belt Infrared Toaster Oven.
| Feature | Tsanangudzo |
|---|---|
| Model Number | 11387, TS-7000 |
| Brand | Omcan |
| Simba | 3.6 kW |
| Zvemagetsi | 240V / 60Hz / 1Ph, 15 Amps |
| Temperature Range | 60°C - 260°C (140°F - 500°F) |
| Control Type | Knob Control |
| Zviyero zveChigadzirwa (D x W x H) | 18.5" x 41" x 15.7" |
| Conveyor Belt Width | 14 inches |
| Certifications | cETlus |
| Approximate Capacity | 19 x 12" pizzas/hour or 25 x 9" pizzas/hour |
Warranty & Support
Warranty Information
This Omcan product is covered by a 1 Gore Zvikamu uye Wevashandi Waranti kubva pazuva rekutenga. Iyi waranti inovhara kukanganisa mune zvigadzirwa uye kugadzirwa pasi pekushandiswa kwakajairwa uye sevhisi.
Zvisizvo:
- Damage resulting from improper installation, misuse, abuse, or neglect.
- Kukuvadza kunokonzerwa nekugadzirisa kusina mvumo kana kugadziriswa.
- Normal kupfeka uye kubvarura.
A restocking fee may apply to returns unless the product is found to be defective and covered under the manufacturer's warranty.
Mutengi Support
For warranty claims, technical assistance, or any questions regarding your Omcan 11387 Conveyor Belt Infrared Toaster Oven, please contact the manufacturer directly:
Nharembozha: 1-800-465-0234
Please have your model number (11387 or TS-7000) and date of purchase available when contacting support.
