Laser Transmitter Module
Muenzaniso:KY-008
User Manual
Laser Transmitter Module Pinout
Iyi module ine 3 pini:
VCC: Module magetsi ekupa - 5 V
GND: Pasi
S: Signal pini (kuita uye kumisa laser)
Iwe unogona kuona pinout yeiyi module mumufananidzo uri pazasi:
SIMBA 
GND 
Signal 
Zvinhu Zvinodiwa
Cherechedza:
Sezvo inodiwa ikozvino iri 40 mA uye mapini eArduino anogona kupa iyi yazvino, iyi module inogona kubatana zvakananga kuArduino. Kana zvichidikanwa kupfuura 40mA, kubatana kwakananga kuArduino kunokuvadza iyo Arduino. Kana zvakadaro, unofanirwa kushandisa laser driver kubatanidza laser module kuArduino.
Danho 1: Denderedzwa
Dunhu rinotevera rinoratidza maitiro aunofanirwa kubatanidza Arduino kune ino module. Batanidza waya zvinoenderana.
Danho 2: Kodhi
Isa iyo inotevera kodhi kuArduino.
/*
Yakagadzirwa musi wa 18 Nov 2020
NaMehran Maleki @ Electropeak
Kumba
*/
void setup () {
pinMode(7, OUTPUT);
}
void loop () {
digitalWrite(7, HIGH);
kunonoka (1000);
digitalWrite(7, PASI);
kunonoka (1000);
}
Arduino
Copy
Mune iyi kodhi, isu tinotanga kuseta iyo Arduino pini nhamba 7 seyakabuda, nekuti isu tichazotonga laser nayo. Ipapo tinobatidza laser uye nekudzima sekondi yega yega.
Kurodha pamusoro kodhi, iyo laser yakabatana neArduino inovhura nekudzima sekondi yega yega.
Zvinyorwa / Zvishandiso
 |
ARDUINO KY-008 Laser Transmitter Module [pdf] User Manual KY-008 Laser Transmitter Module, KY-008, Laser Transmitter Module, Transmitter Module, Module |
