Zviri mukati hide
1 LS XBF-PD02A Programmable Logic Controller
2 Product Information
3 Mirayiridzo Yekushandiswa Kwechigadzirwa
4 Mibvunzo Inowanzo bvunzwa
5 Chengetedzo Yekuchengetedza
6 Operating Environment
7 Inoshanda Support Software
8 Zvikamu zita uye Dimension (mm)
9 Kuisa / Kubvisa Modules
10 Performance specifications
11 Wiring
12 Warranty
13 Zvinyorwa / Zvishandiso
13.1 References

LS-logo

LS XBF-PD02A Programmable Logic Controller

LS-XBF-PD02A-Programmable-Logic-Controller-chigadzirwa

Product Information

Zvinodiwa:

  • C/N: 10310001005
  • Chigadzirwa: Programmable Logic Controller - XGB Positioning
  • Muenzaniso: XBF-PD02A

Mirayiridzo Yekushandiswa Kwechigadzirwa

Kuiswa:

Tevedza nhanho idzi kuisa iyo Programmable Logic Controller (PLC) XGB Positioning XBF-PD02A:

  1. Ita shuwa kuti magetsi adzimwa usati waiswa.
  2. Isa iyo PLC zvakachengeteka munzvimbo yakakodzera.
  3. Batanidza tambo dzinodiwa maererano neiyo yakapihwa wiring diagraph.

Kuronga

Kuronga iyo PLC yekuisa mabasa:

  1. Svika iyo programming interface uchitevera mirairo yemanyorero evashandisi.
  2. Tsanangura maparamendi ekumisikidza senge chinhambwe, kumhanya, uye kumhanyisa.
  3. Edza chirongwa kuti uone kushanda kwakaringana.

Operation:

Kushandisa iyo PLC XBF-PD02A:

  1. Simba paPLC uye ive nechokwadi kuti iri munzvimbo yakagadzirira.
  2. Isa iyo inodiwa yekumisikidza mirairo kuburikidza neiyo control interface.
  3. Tarisa maitiro ekuisa uye ita zvigadziriso sezvinodiwa.

Mibvunzo Inowanzo bvunzwa

  • Q: Chii chiri kushanda tembiricha siyana XBF-PD02A?
    • A: Iyo tembiricha yekushandisa iri -25°C kusvika 70°C.
  • Mubvunzo: XBF-PD02A inogona kushandiswa munzvimbo dzine hunyoro?
    • A: Hongu, XBF-PD02A inogona kushanda munzvimbo dzine mwando kusvika pa95% RH.

XGB Positioning

  • XBF-PD02A

Iyi gidhi yekuisa inopa yakapusa basa ruzivo rwePLC kutonga. Ndokumbira uverenge nekungwarira iyi data sheet uye zvinyorwa usati washandisa zvigadzirwa. Kunyanya verenga kuchengetedza uye kubata zvigadzirwa nemazvo

Chengetedzo Yekuchengetedza

Zvinoreva yambiro uye kungwarira chinyorwa

  • LS-XBF-PD02A-Programmable-Logic-Controller-fig (2)YAMBIRO inoratidza mamiriro angangoita ngozi ayo, kana akasadziviswa, anogona kuguma nerufu kana kukuvara kwakanyanya
  • LS-XBF-PD02A-Programmable-Logic-Controller-fig (2)KUCHENJERA kunoratidza mamiriro ezvinhu anogona kuva nengozi ayo, kana akasadziviswa, anogona kukonzera kukuvara kudiki kana pakati. Inogonawo kushandiswa kunyevera pamusoro pemaitiro asina kuchengeteka

YAMBIRO

  1. Usabate zviteshi kana simba richiiswa.
  2. Dzivirira chigadzirwa kubva pakupindwa nechinhu chekunze chesimbi.
  3. Usashandise bhatiri (chaja, disassemble, kurova, pfupi, soldering).

KUCHENJERA

  1. Iva nechokwadi chekutarisa vhoriyamu yakayerwatage uye terminal kuronga pamberi wiring.
  2. Kana wiring, simbisa screw yeterminal block neyakatsanangurwa torque range.
  3. Usaise zvinhu zvinobvira moto panzvimbo yakapoteredza.
  4. Usashandise iyo PLC munzvimbo yekutenderera yakananga.
  5. Kunze kwevashandi vebasa rehunyanzvi, Usabvisa kana kugadzirisa kana kugadzirisa chigadzirwa.
  6. Shandisa iyo PLC munzvimbo inosangana neyakajairwa zvirevo zviri mudhetabheti rino.
  7. Iva nechokwadi chekuti mutoro wekunze haupfuure chiyero cheiyo inobuda module.
  8. Kana uchirasa PLC nebhatiri, ibate semarara emaindasitiri

Operating Environment

Kuisa, tarisa pasi apa mamiriro.

Aihwa Item Tsanangudzo Standard
1 Ambient temp. 0 ~ 55℃ –
2 Storage temp. -25 ~ 70 ℃ –
3 Ambient humidity 5 ~ 95% RH, isina-condensing –
4 Kuchengetedza humidity 5 ~ 95% RH, isina-condensing –
 

 

 

 

5

  

 

 

Vibration Resistance

 Kudedera pano neapo – –
Frequency Acceleration Amplitude Nguva  

 

 

IEC 61131-2
5≤f<8.4㎐ – 3.5mm 10 nguva munzira imwe neimwe ye

X UYE Z
8.4≤f≤150㎐ 9.8㎨(1g) –
Kuenderera mberi vibration
Frequency Frequency Amplitude
5≤f<8.4㎐ – 1.75mm
8.4≤f≤150㎐ 4.9㎨(0.5g) –

Inoshanda Support Software

Nekugadzirisa system, iyo inotevera vhezheni inodiwa.

  1. XBC Type: V1.8 kana pamusoro
  2. XEC Type: V1.2 kana pamusoro
  3. XBM Type: V3.0 kana pamusoro
  4. XG5000 Software : V3.1 kana pamusoro

Zvikamu zita uye Dimension (mm)

Ichi chikamu chepamberi cheModule. Tarisa kune rimwe nerimwe zita paunenge uchityaira system. Kuti uwane rumwe ruzivo, tarisa kune bhuku rekushandisa.LS-XBF-PD02A-Programmable-Logic-Controller-fig (3)

Kuisa / Kubvisa Modules

Pano inotsanangura nzira yekuisa chigadzirwa chimwe nechimwe chigadzirwa.

  1. Kuisa module
    1. Bvisa chivharo chekuwedzera pane chigadzirwa.
    2. Sunda chigadzirwa uye chibatanidze mukubvumirana nehoko yekugadzirisa mativi mana uye hoko yekubatanidza pasi.
    3. Mushure mekubatanidza, shandisa pasi hoko yekugadzirisa uye gadzirisa zvachose.
  2. Kubvisa module
    1. Sunda chiredzo chekudambura, wobva wabvisa chigadzirwa nemaoko maviri. (Usabvisa chigadzirwa nechisimba)LS-XBF-PD02A-Programmable-Logic-Controller-fig (4)

Performance specifications

Performance specifications dzinotevera

Type Zvinotsanangurwa
Kwete yekutonga axis 2
Kudzora nzira Position control, Speed ​​​​control, Speed ​​​​/Position control,

Position/Speed ​​control
Connection RS-232C chiteshi kana USB yechinhu chakakosha
Back-up Inochengetedza parameter, data yekushanda pane flash memory

Wiring

Kuchenjerera kune wiring

  1. Usarege AC tambo yemagetsi padyo neanalog yekupinza module yekunze yekupinza chiratidzo mutsara. Nechinhambwe chakakwana chakachengetwa pakati pavo, chinove chisina kuvhiyiwa kana ruzha rwekuita.
  2. Cable ichasarudzwa mukutariswa kwakakodzera kweambient tembiricha uye inotenderwa ikozvino. Kupfuura AWG22 (0.3㎟) inokurudzirwa.
  3. Usarega tambo iri pedyo zvakanyanya kune inopisa mudziyo uye zvinhu kana kuti yakanangana neoiri kwenguva yakareba, izvo zvinokonzeresa kukuvara kana kushata kwekushanda nekuda kwepfupi-circuit.
  4. Tarisa polarity paunenge uchiisa waya kune terminal.
  5. Wiring ine high-voltage mutsara kana tambo yemagetsi inogona kuburitsa inductive chipingamupinyi chinokonzera kusashanda zvakanaka kana kukanganisa.
  6. Vhura chiteshi chaunoda kushandisa.

Wiring examples

  1. Interface nekunze
    Item Pin Nha. Signal Signal direction module - yekunze
    X Y
    Basa kune imwe neimwe axis B20 MPG A+ Manual pulse jenareta Encoder A+ kuisa ß
    A20 MPG A- Manual pulse jenareta Encoder A- yekupinda ß
    B19 MPG B+ Manual pulse jenareta Encoder B+

    input

    		 ß
    A19 MPG B- Manual pulse jenareta Encoder B- yekupinda ß
    A18 B18 FP+ Pulse kubuda (musiyano +) à
    A17 B17 FP- Pulse kubuda (kusiyana-) à
    A16 B16 RP+ Pulse sign (musiyano +) à
    A15 B15 RP- Pulse sign (musiyano -) à
    A14 B14 0V + Yakakwirira muganho ß
    A13 B13 0V- Low Limit ß
    A12 B12 IMBWA IMBWA ß
    A11 B11 NC Haina kushandiswa  
    A10 B10
    A9 B9 COM Common(OV+,OV-,DOG) ⇔
    A8 B8 NC Haina kushandiswa  
    A7 B7 INP Munzvimbo chiratidzo ß
    A6 B6 INP COM DR/INP chiratidzo Common ⇔
    A5 B5 CLR Kutsauka pakaunda chiratidzo chakajeka à
    A4 B4 CLR COM Deviation counter clear sign Common ⇔
    A3 B3 MUSHA +5V Mavambo chiratidzo (+5V) ß
    A2 B2 KUMBA COM Mavambo chiratidzo (+5V) Zvakajairwa ⇔
    A1 B1 NC Haina kushandiswa  
  2. Interface paunoshandisa I/O link board
    Wiring inogona kuva nyore nekubatanidza I/O link board uye I/O connector paunenge uchishandisa XGB positioning module
    Kana wiring XGB positioning module nekushandisa TG7-1H40S(I/O link) uye C40HH-10SB-XBI(I/O connector), hukama huripo pakati peimwe neimwe terminal yeI/O link board uye I/O yemodule yekumisikidza yakaita se. zvinotevera.LS-XBF-PD02A-Programmable-Logic-Controller-fig (5)

Warranty

  • Nguva yewaranti ndeye 36 mwedzi kubva pazuva rekugadzirwa.
  • Kuongororwa kwekutanga kwekukanganisa kunofanira kuitwa nemushandisi. Nekudaro, pakukumbira, LS ELECTRIC kana vamiriri vayo vanogona kuita basa iri nemubhadharo. Kana chikonzero chekukanganisa chikawanikwa chiri mutoro weLS ELECTRIC, iyi sevhisi ichave isina muripo.
  • Kusabatanidzwa kubva muwaranti
    1. Kutsiviwa kwezvikamu zvinobatika uye zvisingagumi zvehupenyu (semu relay, fuse, capacitor, mabhatiri, maLCD, nezvimwewo)
    2. Kutadza kana kukuvadzwa kunokonzerwa nemamiriro asina kufanira kana kubata kunze kweiyo inotsanangurwa mubhuku rekushandisa
    3. Kukundikana kunokonzerwa nekunze kwezvinhu zvisingaenderani nechigadzirwa
    4. Kutadza kunokonzerwa nekugadziridzwa pasina mvumo yeLS ELECTRIC
    5. Kushandiswa kwechigadzirwa nenzira dzisingatarisirwi
    6. Kukundikana kusingagone kufanotaurwa / kugadziriswa neazvino tekinoroji yesainzi panguva yekugadzirwa
    7. Kutadza nekuda kwezvinhu zvekunze zvakaita semoto, abnormal voltage, kana njodzi dzinongoitika dzoga
    8. Dzimwe nyaya idzo LS ELECTRIC haina mhosva
  • Kuti uwane ruzivo rwakadzama rwewaranti, ndapota tarisa kune bhuku remushandisi.
  • Izvo zviri mugwaro rekuisa zvinogona kushanduka pasina chiziviso chekuvandudza kuita kwechigadzirwa.

Iyo kambani LS ELECTRIC Co., Ltd. www.ls-electric.com 10310001005 V4.5 (2024.06)

  • E-mail: automation@ls-electric.com
  • Headquarter/Seoul Office Tel: 82-2-2034-4033,4888,4703
  • LS ELECTRIC Shanghai Hofisi (China) Tel: 86-21-5237-9977
  • LS ELECTRIC (Wuxi) Co., Ltd. (Wuxi, China) Tel: 86-510-6851-6666
  • LS ELECTRIC Vietnam Co., Ltd. (Hanoi, Vietnam) Tel: 84-93-631-4099
  • LS ELECTRIC Middle East FZE (Dubai, UAE) Tel: 971-4-886-5360
  • LS ELECTRIC Europe BV (Hoofddorf, Netherlands) Tel: 31-20-654-1424
  • LS ELECTRIC Japan Co., Ltd. (Tokyo, Japan) Tel: 81-3-6268-8241
  • LS ELECTRIC America Inc. (Chicago, USA)Tel: 1-800-891-2941
  • Fekitari: 56, Samseong 4-gil, Mokcheon-eup, Dongnam-gu, Cheonan-si, Chungcheongnam-do, 31226, Korea

LS-XBF-PD02A-Programmable-Logic-Controller-fig (1)

Zvinyorwa / Zvishandiso

LS XBF-PD02A Programmable Logic Controller [pdf] Installation Guide
XBF-PD02A Programmable Logic Controller, XBF-PD02A, Programmable Logic Controller, Logic Controller, Controller

References

Siya mhinduro

Yako email kero haizoburitswa. Nzvimbo dzinodiwa dzakamakwa *