Spacemaker Recessed Floor Heater
“
Product Information
Specifications
Dimensions: Floor cut out size: 357 x 254mm
Finish: Anodised aluminium grille with
removable centre section.
Installation: Installs between floor joists or
purpose made trenches in concrete floors. Air intake and discharge
through grille. Unit must be earthed. Suitable for two-pipe central
heating systems only.
Commissioning: Check water temperature is hot
enough to activate low temperature cut-out (LTC). Vent screw
accessible through grille.
Product Usage Instructions
- Ensure the floor cutout size matches the specified
dimensions. - Install the unit between floor joists or in purpose-made
trenches in concrete floors. - Connect the unit to a suitable two-pipe central heating
system. - Check and adjust water temperature for optimal
performance. - Ensure proper earthing of the unit.
Technical Data
Heat Output:
| Model | Low (kW) | High (kW) |
|---|
Ordering Guide
Model: SPACEMAKER
Packed Weight (kg): 7
Product Codes: HPSM12001
FAQ
Q: Can the Spacemaker be used with other heating systems?
A: The Spacemaker is suitable for two-pipe central heating
systems only.
Q: How do I adjust the water temperature for the unit?
A: You can adjust the water temperature by checking the low
temperature cut-out (LTC) and accessing the vent screw through the
grille.
“`
Spacemaker
Hall | Kitchen | Utility | Conservatory
A fan convector that installs flush with the floor, providing efficient and effective heat at low level
Perfect for places in the home where space is particularly limited Ideal for spaces such as entrance halls, lobbies, circulation areas and applications where wall space is limited
As part our commitment to continuous improvement Smith’s Environmental Products may change the specifications of its products without prior notification or public announcement. All descriptions, illustrations, drawings and specifications in this publication present only general particulars and shall not form part of any contract. All dimensions are in mm unless otherwise stated. Please visit our website for the most up to date information.
Issue 005 | January 2025
+44 (0) 1245 324 900 | sales@smithsep.co.uk | SmithsEP.co.uk
Product information
Dimensions
Finish Anodised aluminium grille with removable centre section.
Installation Installs between floor joists or purpose made trenches in concrete floors. Air intake and discharge through grille. Unit must be earthed. Suitable for two-pipe central heating systems only.
Commissioning Check water temperature is hot enough to activate low temperature cut-out (LTC). Vent screw accessible through grille.
Controls Rocker switch – low/off/high, below grille Low temperature cut-out thermostat set to energise fan at approx. 35°C.
Specification To specify state: Recessed floor mounted unit with fan and low temperature cut out. As Smith’s Spacesaver.
Floor cut out size: 357 x 254mm
Air flow pattern
35 pipe ctrs 161
194
20
Ordering Guide
Model SPACEMAKER
397 298
236 350
Packed Wt (kg) 7
Product Codes HPSM12001
Technical Data Heat Output
Model SPACEMAKER SST8
Heat Output at 80°
Low (kW)
High (kW)
1.6
2.2
Heat Output at 75°
Low (kW)
High (kW)
1.5
2.1
Heat Output at 70°
Low (kW)
High (kW)
1.3
1.8
Heat Output at 65°
Low (kW)
High (kW)
1.2
1.7
Heat Output at 60°
Low (kW)
High (kW)
1.1
1.5
Model SPACEMAKER SST8
Heat Output at 55°
Low (kW)
High (kW)
0.9
1.3
Heat Output at 50°
Low (kW)
High (kW)
0.8
1.2
Heat Output at 45°
Low (kW)
High (kW)
0.7
1.0
Heat Output at 40°
Low (kW)
High (kW)
0.6
0.9
Model SPACEMAKER SST8
Flow & return connections
15mm
Mains cable
Transformer
Fused spur
1.5m
n/a
3A
Total Power Consumption
Low (Watts)
High (Watts)
Water Capacity (Litres)
20
30
0.27
Sound Levels
Low (dBA)
High (dBA)
32
39
Casting colour
Fan-only
Anodised aluminium
n/a
Heat outputs tested in accordance with BS4856 using entering water temperature and 340 l/h (75gph) flow rate. Sound levels measured at 1.5m.
As part our commitment to continuous improvement Smith’s Environmental Products may change the specifications of its products without prior notification or public announcement. All descriptions, illustrations, drawings and specifications in this publication present only general particulars and shall not form part of any contract. All dimensions are in mm unless otherwise stated. Please visit our website for the most up to date information.
Issue 005 | January 2025
+44 (0) 1245 324 900 | sales@smithsep.co.uk | SmithsEP.co.uk
Documents / Resources
 |
Smith s Spacemaker Recessed Floor Heater [pdf] Owner's Manual SPACEMAKER, SPACEMAKER SST8, Spacemaker Recessed Floor Heater, Recessed Floor Heater, Floor Heater |