smiirl-logo

smiirl Counter with Own Logo to Display any Data

GENERAL INFORMATION

In the box
  • Counter
  • Counter guide
  • Safety & warranty guide
  • Alimentation 220V/110V
  • Power consumption 0.5W
  • Cable length 2.5 m/98.4 in
  • Power adaptater: AUS, EU, USA, UK
  • Microfibre cloth
Counter Materials
  • Lime wooden facade + Matte protection varnish
  • Transparent polycarbonate glasse
  • Matte finished case
Connectivity
  • Wi-fi 802.11bgn (2.4GHz)
  • Ethernet: RJ45 plug

Overview

smiirl-Counter-with-Own-Logo-to-Display-any-D-1

INSTALLATION

You will need:

GET TO KNOW YOUR COUNTER

  1. You Counter is broadcasting the «SmiirlSetup» Wi-fi.
  2. An electrical device (laptop, smartphone…) is connected to your Counter.
  3. Your Counter is paired with your personal/ office Wi-fi network. If the Counter remains blocked with three crossed-out flaps, it is probably that the Wi-Fi password entered is wrong. Wait a few minutes, your Counter will automati-cally return to status n°1.
  4. Your Counter has obtained an IP address.
  5. Your Counter is connected to the Internet and can exchange data with Smiirl servers. This status lasts a few minutes during which you must not disconnect it. If it remains blocked for more than 15 minutes, contact Smiirl support: support@smiirl.com.
  6. The flaps are blank or show 1: check that your Counter is linked to a data (Facebook page, Instagram account, JSON URL…)

Documents / Resources

smiirl Counter with Own Logo to Display any Data [pdf] User Manual
COUNTV2, 2AC8OCOUNTV2, Counter with Own Logo to Display any Data, Counter, Own Logo to Display any Data, Counter with Own Logo to Display, Counter with Data Display

References

Leave a comment

Your email address will not be published. Required fields are marked *