EGF03PBUS Retro Semi Automatic Espresso Machine
“
Product Information
Specifications:
- Product Name: Coffee Machine
- Manufacturer: Smeg
- Website: www.smeg.com
Product Usage Instructions
Important Safety Instructions:
WARNING: Failure to follow the instructions may
result in fire or explosion causing property damage, personal
injury, or death. Please read and save these instructions.
Recognize Safety Information: The safety alert
symbol will alert you to potential hazards that can result in
severe personal injury or death.
Understand Signal Words: Pay attention to
signal words – DANGER, WARNING, or CAUTION – to understand the
level of potential hazards.
Usage Guidelines:
1. Before using the coffee machine, carefully read all the
instructions provided in the manual.
2. Ensure that the appliance is placed on a stable and level
surface to prevent accidents.
3. Do not use the coffee machine near flammable materials or
liquids to avoid the risk of fire.
4. Follow all safety messages and guidelines mentioned in the
manual to ensure safe operation.
Cleaning and Maintenance:
1. Regularly clean the coffee machine according to the
instructions provided in the manual to maintain performance.
2. Always unplug the appliance before cleaning or performing any
maintenance tasks.
3. Use a damp cloth to clean the exterior of the coffee machine
and follow specific cleaning instructions for internal
components.
Brewing Coffee:
1. Fill the water reservoir with fresh, clean water according to
the desired amount of coffee to be brewed.
2. Place the coffee grounds in the filter basket and ensure it
is securely in place.
3. Turn on the coffee machine and select your desired brewing
options (strength, size, etc.).
4. Once brewing is complete, pour the freshly brewed coffee into
a mug or carafe and enjoy!
Frequently Asked Questions (FAQ)
Q: Can I use ground coffee in this coffee machine?
A: Yes, you can use ground coffee in the filter basket of this
coffee machine for brewing.
Q: How often should I descale the coffee machine?
A: It is recommended to descale the coffee machine every 2-3
months depending on usage and water hardness in your area.
Q: Is it safe to leave the coffee machine plugged in when not
in use?
A: It is recommended to unplug the coffee machine when not in
use for safety and energy-saving purposes.
“`
ES FR EN
USER MANUAL
COFFEE MACHINE
MANUEL DE L’UTILISATEUR
MACHINE À CAFÉ
MANUAL DE USO
CAFETERA
We advise you to read this manual carefully, as it contains all the instructions for managing the appliance’s aesthetic and functional qualities. For further information on the product: www.smeg.com
Nous conseillons de lire attentivement ce manuel, qui comprend toutes les indications pour maintenir inaltérées les qualités esthétiques et fonctionnelles de l’appareil acheté. Pour obtenir des informations supplémentaires sur le produit : www.smeg.com
Aconsejamos leer atentamente este manual que contienen todas las indicaciones para mantener inalterada la calidad estética y funcional del aparato adquirido. Más información sobre el producto en: www.smeg.com
“A”
15 15
38
11 12
16 13 14
2
3
39
18
8
23
4
6
5
30b
30a
7 10
19
31b
9 24
25 27
“B”
1 33
31a
22 20 21
26
29
17
28
32
34b
34a
4
19 5 20
“C” 23
23a
20a
20
“D”
16 1
16 2
16 3
“E” 22b
38 39
22b
15
15
28
24
22
41
22 28
“F”
42
42
“H”
“G” 20
18a 31b
“I” 11
18a 18b
22
32
34a
15
“J”
21 7
14 22
Important information for the user Informations importantes pour l’utilisateur
Información importante para el usuario Instructions / Instructions / Instrucciones Description / Description / Descripción Use / Utilisation / Uso Cleaning and care / Nettoyage et entretien / Limpieza y cuidado Safety instructions / Consignes de sécurité / Instrucciones de seguridad Information / Informations / Información Advice / Conseil / Recomendaciones
Scan the QR code for a quick access to the portal My Smeg Assistant Scannez le code QR pour accéder rapidement au portail My Smeg Assistant Escanee el código QR para acceder rápidamente al portal My Smeg Assistant
TpTnhhroieeoticrmmneoaa. tTninchuueeffa.aiTccllhttuuuesrrteerilarrlutrrisoeetrssnaeestrriaovveennssds tathdhneeedsrrcidigrgeihphstttcitorotionpmstmioacanokksenectaaoainnnnyetaydcinchiehnadanthngiingesestmhsdiasdenmeeuaemamnleuaedardeluasutherseefeurtflheufelfoorferorefiromntrhpeoertnoboivmitenbpmdirineondnvgitenaomgnfedaintsntadporeraformidetsuemcpreetrsloryewdliyunitcdhintoiscduawitctipaivtrhetiioov. eur.t Le fabricant se réserve la faculté d’apporter, sans préavis, toutes les modifications qu’il jugera utiles pour l’amélioration de ses produits. Les illustrations et les descriptions figurant dans ce manuel ne sont pas contraignantes et n’ont qu’une valeur indicative. El fabricante se reserva el derecho a aportar sin aviso previo todas las modificaciones que considere útiles para la mejora de sus propios productos. Las ilustraciones y las descripciones contenidas en este manual no comprometen, por tanto, al fabricante y tienen un valor meramente indicativo.
EN
IMPORTANT INSTRUCTIONS
Important instructions
WARNING: If the instructions contained in this manual are not followed precisely, fire or explosion may result causing property damage, personal injury or death.
READ AND SAVE THESE INSTRUCTIONS Your safety and the safety of others are very important. We have provided many important safety messages throughout this manual and on the appliance. Read all the instructions before using the appliance and always obey all safety messages.
WARNING · To reduce the risk of fire or electric shock, do not remove the cover (or back).
· No user-serviceable parts inside! · Repair should be done by authorized service personnel only.
RECOGNIZE SAFETY INFORMATION This is a safety alert symbol. This symbol alerts you to potential hazards that can result in severe personal injury or death.
UNDERSTAND SIGNAL WORDS A signal word – DANGER, WARNING or CAUTION – is used with the safety alert symbol. DANGER denotes the most serious hazards. It means you could be killed or seriously injured if you do not immediately follow the instructions. WARNING means you could be killed or seriously injured if the instructions are not followed. CAUTION indicates a potentially hazardous situation, which, if not avoided, could result in minor to moderate injury.
EN – 1
IMPORTANT INSTRUCTIONS
· This appliance is intended for use in the home only.
· Use this appliance only for its intended purpose. The manu-
facturer cannot be held liable for damage caused by improper
ATTENTION
·
use of this appliance. This appliance complies with current safety regulations.
Improper use of this appliance can result in personal injury
and material damage.
· Read all the instructions before installing or using the appli-
ance for the first time.
· Keep these operating instructions in a safe place and pass
them on to any future user.
The safety messages will inform you of potential hazards, on how to avoid the risk of injury and what can occur if the instructions are not followed. IMPORTANT: Observe all codes and ordinances in force.
WARNING: For your safety, the instructions contained in this manual must be followed to minimize the risk of fire or explosion and to prevent property damage, personal injury or death.
Do not store or use gasoline or other flammable vapors, liquids or materials near this or any other appliance.
NOTE: This appliance is NOT designed for installation in manufactured (mobile) homes or in recreational vehicles (RVs).
NOTE:
GROUNDED PLUG (for product manufactured with a grounded plug) As a safety feature, this product is equipped with grounded plug, which will only fit into a three-prong outlet. Do not attempt to bypass this safety feature. Improper connection of the grounding conductor may result in the risk of electric shock. Consult a qualified electrician if you have any doubts on whether the outlet is properly grounded.
EN – 2
EN
IMPORTANT SAFEGUARDS
WARNING When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and / or injury to person including the following:
1 Warnings
Follow all safety precautions to ensure safe use of the appliance. · Before using the appliance, read this user
manual carefully.
· Do not use the appliance outdoors.
· This appliance is for household use only.
· Do not use the appliance for other than its intended use.
· Do not allow children to use the appliance.
· Children should not play with the appliance. Keep the appliance out of the reach of children.
· Keep the packaging material (plastic bags, expanded polystyrene) out of the reach of children.
· Close supervision is necessary when any appliance is used by or near children.
· Turn off the appliance immediately after use.
· Do not leave the appliance unattended while it is running.
· Disconnect the appliance from the wall outlet before assembly, disassembly, cleaning and after each use.
· To disconnect, turn any control to “off,” then remove plug from wall outlet.
· Turn the appliance OFF, then unplug from the outlet when not in use, before assembling or disassembling parts and
before cleaning. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
· To protect against fire, electrical shock and personal injury, do not immerse the appliance, the power cord or plug in water or any other liquid.
· Do not touch the appliance or the plug with wet hands.
· Never try to extinguish a flame/fire with water: turn off the appliance, unplug it from the outlet and cover the flame with a lid or a fire blanket.
· Do not use the appliance if the power cord or plug is damaged or if the appliance has been dropped or damaged in any way.
· Do not let cord hang over edge of table or counter, or touch hot surfaces.
· Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to an authorized service facility for examination, repair or adjustment.
· Make sure the power cord does not come in contact with sharp edges.
· Do not pull on the cord to remove the plug from the socket.
SAVE THESE INSTRUCTIONS
EN – 3
IMPORTANT SAFEGUARDS
· Do not place the appliance on or near switched-on gas or electric burners, inside an oven, or near heat sources.
· Do not touch hot surfaces. Use handles and knobs.
· Do not place the appliance near faucets or sinks.
· Never attempt to repair the appliance yourself or without the help of a qualified technician. Failing to do this will void the warranty.
· In case of malfunction, have the appliance repaired by a qualified technician.
· Do not make any changes to the appliance.
· Make sure that the power outlet used is always freely accessible, because only in this way can it be unplugged when necessary.
· To remove the plug from the power outlet, operate directly on the plug. Never pull the cable, it could be damaged.
· If the appliance should break down, do not attempt to repair it.
· Do not allow the power supply cable to dangle over the edge of the table or other surface or to touch hot surfaces.
· If the plug or power supply cable are damaged, have them replaced exclusively by the Technical After-sales centre, so as to prevent all risks.
To avoid the risk of injury, do not open the brew chamber during the brew process.
· Check hopper for presence of foreign objects before using.
For this appliance
· Only insert water into the appropriate tank. Use fresh, clean water.
· The appliance shall not be placed in a cabinet when in use.
· Allow to cool before putting on or taking off parts, and before cleaning the appliance.
· The appliance generates heat and produces hot water and steam during operation. Avoid contact with boiling steam or water.
· Do not fill the water container beyond the maximum limit indicated.
· Do not use without water in the tank or without a tank.
· Only use the appliance indoors and at a maximum altitude of 2000 meters.
· Use only coffee beans to obtain the powder, do not put already ground coffee in the coffee bean hopper.
· Use the device only to prepare coffeebased drinks from grinding coffee beans or to dispense hot water. Other uses are improper.
· Use only original spare parts from the manufacturer. The use of spare parts not recommended by the manufacturer may cause fire, electric shock or injury to persons.
· Place the appliance on a flat, dry surface.
· Avoid wetting or spraying liquid on the appliance. In case of contact with liquid, immediately unplug the cord from the electrical outlet and dry thoroughly: Risk of electric shock!
SAVE THESE INSTRUCTIONS
EN – 4
EN
IMPORTANT SAFEGUARDS
· Scalding may occur if the lid is removed during the brewing cycles.
· Do not use abrasive cleaners or sharp objects to clean the appliance.
· The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock or injury to persons.
· Do not install the appliance in an environment that is not suitable.
· Do not place the appliance on or in proximity of electric or gas cookers, or in a heated oven.
· This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they are closely supervised and instructed concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
· Avoid contacting moving parts. Do not attempt to defeat any safety interlock mechanisms.
· This appliance has important markings on the plug blade. Contact a qualified technician to replace the plug with a suitable one if damaged.
· Connect the appliance only to a power outlet installed perfectly.
c) If a long detachable power-supply cord or extension cord is used: 1. The marked electrical rating of the detachable power-supply cord or extension cord should be at least as great as the electrical rating of the appliance; 2. If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord; and 3. The longer cord should be arranged so that it will not drape over the counter top or table top where it can be pulled on by children or tripped over.
Connect the appliance Make sure that the mains voltage corresponds with that indicated on the data plate on the bottom of the appliance. Connect the appliance only to a power outlet installed perfectly. If the plug and power outlet are incompatible, have the power outlet replaced with a suitable type by qualified staff.
Electrical Cord: a) A short power-supply cord (or detachable
power-supply cord) is provided to reduce risks resulting from becoming entangled in or tripping over a longer cord. b) Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use.
SAVE THESE INSTRUCTIONS
EN – 5
IMPORTANT INSTRUCTIONS
This user’s manual This user’s manual is an integral part of the appliance and must be kept intact and available to the user throughout its life cycle.
Manufacturer’s liability The manufacturer declines all liability for damage undergone by persons and objects due to: · use of the appliance different from that
envisioned; · user manual has not been read; · tampering of individual parts of the
appliance; · use of non-original spare parts; · failure to comply with safety
recommendations.
Identification plate The identification plate lists the technical data, serial number and brand name. The identification plate must never be removed.
Disposal
Power voltage Risk of electric shock
· Unplug the appliance. · Unplug the cord from the wall outlet.
· Old electrical equipment must not be disposed of with household waste! In accordance with the law in force, electrical appliances at the end of their life should be taken to separate collection facilities for electrical and electronic waste. This is so that valuable materials from old appliances can be recycled and the environment can be protected. For more information, please contact your local authorities or recycling center employees.
Note that non-polluting and recyclable materials are used for packaging the appliance.
· Dispose of the packaging materials at appropriate differentiated waste collection centers.
Plastic packaging Risk of suffocation
· Do not leave the packaging or any part of it unattended.
· Do not allow children to play with the plastic packaging bags.
SAVE THESE INSTRUCTIONS
EN – 6
EN
Description / Controls
2 Description of the appliance (Fig.A)
1 Machine body 2 Coffee bean container lid 3 Coffee bean container 4 Grinding levels 5 Grinding level indicator 6 Water tank lid 7 Water tank (2.4 l) 8 Cup shelf 9 ON/OFF button 10 Control panel 11 Grinding key for single espresso 12 Grinding key for double espresso 13 Dispensing key for single espresso 14 Dispensing key for double espresso 15 Steam/water lever 16 Pressure gauge 17 Water hardness test strip 18 Conical grinders 19 Portafilter support 20 Portafilter 21 Dispensing unit 22 Steam/hot water wand 23 Tamper 24 Drip tray 25 Coffee grounds collection tray 26 Cup grill 27 Water level indicator 28 Stainless steel milk jug 29 Accessories drawer 30a 1 cup single wall filter 30b 2 cups single wall filter 31a 1 cup double wall filter 31b 2 cups double wall filter 32 Dispensing unit cleaning disk 33 Cleaning brush 34a Steam wand cleaning needle 34b Filter holes cleaning needle
3 Description of the parts/ accessories (Fig.A)
Accessories drawer (29)
The machine has housing for accessories not being used, so that they are always available to the user. · To access the accessories drawer, remove the
drip tray (24), and extract the drawer (29) positioned inside the machine.
Filters
This machine has four filters; two single wall filters and two double wall filters.
Single wall filters (30a, 30b) These filters allow various degrees of grinding, dosing and tamping to be experimented, in order to create a perfectly balanced espresso.
Double wall filters (31a, 31b) These filters facilitate and regulate pressure also when grinding and dosing are not perfect or when using pre-ground coffee.
Select the filter for one or two cups as required. If single wall filters are used and passage from a single filter to a double one and vice versa, it may be necessary to prepare a few coffees before the ideal grinding and correct dose for pre-set dispensing are obtained. For example, when very fine grinding with single wall filters is selected, it may be necessary to increase the amount of coffee ground to guarantee that the dose contained in the filter is correct.
EN – 7
Use
The machine is pre-set to dispense coffee with the use of single wall filters at medium grinding level of the coffee bean container FINE segment. Depending on preferred use and the desired flavour, adjust the grinding fineness by turning the coffee beans container clockwise or anti-clockwise.
Dispensing unit cleaning disk (32) Silicone disk to be used to clean the dispensing unit.
Cleaning brush (33) Use to clean the conical grinders (18).
Steam wand/filter holes cleaning needles It is made up from two needles with different thickness: one for cleaning the steam wand hole (34a) and the other for cleaning the holes in the coffee filters (34b).
3.1 Description of controls (Fig.A)
ON/OFF key (9) Power is supplied to or removed from the machine by pressing this button.
Grinding key for single espresso (11) The key allows a pre-set quantity of coffee to be ground for a single espresso.
Grinding key for double espresso (12) The key allows a pre-set quantity of coffee to be ground for a double espresso.
Dispensing key for single espresso (13) The key allows a pre-set quantity for a single espresso coffee to be dispensed.
Dispensing key for double espresso (14) The key allows a pre-set quantity for two espresso coffees to be dispensed.
Water hardness test strip (17) Use the strip supplied to detect the hardness of the water used as indicated in the “Machine setting –
Water hardness” paragraph.
Milk jug (28) Stainless steel milk jug.
Tamper (23) Tamper with stainless steel disk with diameter of 58 mm to be used to press the ground coffee.
Water/steam lever (15) Turn the lever clockwise, in correspondence with the ” ” icon to dispense hot water. Turn the lever anti-clockwise to dispense steam. Two steam intensities can be selected at will in correspondence with the respective icons ” ” / ” “. Intensity level ” ” is recommended to heat or froth milk for beverages that require little froth such as, for example, Caffe Latte. Intensity level ” ” is recommended to froth milk and create froth for beverages such as Cappuccino, Latte macchiato.
EN – 8
EN
Use
3.2 Alarms
The keys flash differently to indicate the relative alarm.
Keys (11) and (12) flash: No coffee beans container (3) or coffee beans container not introduced correctly alarm. Make sure that the container is assembled correctly or add coffee beans, if necessary.
Keys (11) and (12) flash quickly: The coffee grinder has been used for too long and the temperature block has activated or it is clogged. Press one of the two flashing keys and wait for cooling or disassemble the coffee grinder and clean the tube from above.
Keys (13) and (14) flash in sequence: The machine is reaching the correct temperature for dispensing coffee. Wait for the two keys to have a fixed light and then select the desired beverage.
Keys (13) and (14) flash simultaneously: No water tank (7) or tank not introduced correctly or with insufficient water to dispense coffee alarm. Check the correct introduction or add water if necessary.
Key (14) with orange light: The key has an orange light to indicate that a descaling cycle is necessary. To proceed, refer to the “Descaling” paragraph in the Cleaning and maintenance paragraph. To by-pass the procedure just press the key (14): all keys have a fixed light and the machine will be ready for use.
In order not to change the flavour of the coffee and for correct operation of the machine, it is advised to perform the descaling cycle when signalled by the machine.
If the descaling cycle is not performed, the key (14) will light up in orange at every switch-on until the descaling cycle has been carried out.
3.2 Before first use (Fig. A and B)
· Unpack the appliance carefully and remove all packaging materials.
· Use a damp cloth to clean all removable components, such as the coffee bean container (3), water tank (7), lids (6, 2), coffee grounds collection tray (25), drip tray (24), cup holder grill (26), portafilter (20), filters (30a, 30b, 31a, 31b), tamper (23) and other accessories.
· Make sure that all components are thoroughly dry before re-mounting them.
Do not use the coffee machine without water in the tank or without the water tank fitted. FAULT HAZARD!
The parts that may come into contact with foodstuffs are made using materials that comply with the provisions of the legislation in force.
· Introduce the beans container, making the ” ” arrow on the container match the on the ” ” surface.
· Fix the container by turning it clockwise and matching the closed arrow ” ” with the arrow on the surface ” ” .
· Remove the red protective cap located on the back of the machine, between the tank (7) and the rear body of the machine (1).
EN – 9
Use
4 Use
Before starting the coffee machine, carefully read chapter “1 Warnings” and the “Before commissioning” paragraph.
4.1 Machine switch-on
· Make sure that the drip tray (24) complete with cup grill (26) is correctly mounted at switch-on and before all dispensing.
· Lift the tank cover (6) and pour fresh water in the tank making sure not to exceed the indicated `Max’ level and then re-mount the lid (6).
· Lift the coffee bean container lid (2) and introduce the coffee beans into the container (3).
· Switch the coffee machine on by pressing the ON/OFF switch (9): the keys (13) and (14) flash to indicate that the correct temperature is being reached. The coffee machine is ready for use as soon as all the keys have a fixed light.
4.2 First use (Fig.A)
On first use it is recommended to set the water hardness as indicated in the “Water hardness” paragraph.
On first use, the internal circuits must be rinsed. Proceed as described below.
– Switch the machine on as described in the “Machine switch-on” paragraph.
· Attach the portafilter (20) with single wall filters (31b) for double cup to the dispensing unit (21).
· Position a container under the coffee dispensing nozzles and press the key (14).
· Repeat this procedure 5 times.
EN – 10
· Position a container under the hot water/
steam wand (22).
· Turn the steam lever (15) in correspondence
with the ” ” icon and dispense water for
15 seconds and then take it back to the
central position to stop dispensing.
· Turn the steam lever (15) again in
correspondence with the ”
” icons
and dispense steam into the container for
a few seconds and then take it back to the
central position to stop dispensing.
It is recommended to rinse the
internal circuits also when the
coffee machine has not been used
for a long period of time and every
time it is turned on.
4.3 Grinding level regulation (Fig. B)
Do not use green, caramelised or candied coffee beans, as they may stick to the coffee machine and ruin it.
Grinding level should be regulated when the machine is in use or at the occasion of the first use, when the bean tank is completely empty; turning the coffee bean container (3) with the grinder at a standstill and with the beans inside could damage the grinding unit.
· To adjust the level of grinding, turn the coffee beans container (3) clockwise or anti-clockwise according to the fineness desired, positioning the scale (4) with the grinding level present on the container in correspondence with the indicator (5). Turning the container (3) clockwise, grinding will be finer, anti-clockwise makes grinding coarser.
Use
EN
· Position the portafilter (20) with relative filter introduced onto the relevant support (19) on the left and press the key relative to desired grinding and check it is correct.
4.4 Preparing espresso coffee (Fig.A, B, C, D)
For excellent coffee tasting, it is recommended to pre-heat the cup by rinsing them with hot water or dispensing hot water into the cup via the wand (22).
At every switch-on, it is advised to rinse the circuits of the dispensing unit (21) and of the portafilter (20) dispensing a double coffee without the presence of coffee in the filter.
· Check the level of water in the tank (7) and, if necessary, add water paying attention not to exceed the “Max” level.
· Check that there are coffee beans in the beans container (3).
· Select the filter (30a, 30b, 31a, 31b) suitable for the type of dispensing necessary and put it into the portafilter (20) . For more details regarding the different filters supplied, see the “Description of the parts/ accessories” paragraph.
· Position the portafilter (20) with relative filter introduced onto the relevant support (19).
· Press the key (11) to grind the dose for one coffee or (12) to grind the dose for two coffees.
· After grinding, position the portafilter (20) on a surface as shown in figure C.
· Distribute the ground coffee evenly and press it using the tamper supplied (23). For correct dosing of the coffee into the filter and correct tamping, the upper edge (23a) of the tamper must be aligned with the upper edge (20a) of the portafilter.
· Remove the excess ground coffee from the portafilter, attach it to the dispensing unit (21) and then turn it anti-clockwise until it is tight.
· Position the cup or cups under the portafilter nozzles (20).
· Select the desired beverage and press the relative key (13 or 14). When the quantity set is reached, dispensing will end automatically. The manometer (16) allows the user to check whether the coffee is dispensed excellently as indicated in Fig. D. D1. Correct Extraction The indicator is within the `Espresso’ segment: the coffee is extracted correctly. The flow of coffee is slow but continuous and extraction lasts 25-35 sec. D2. Under-extraction The indicator is below the `Espresso’ segment. The coffee is under-extracted. Possible causes: Grinding is too coarse or the amount ground is insufficient or tamping was performed with incorrect pressure. Solutions: Adjust coffee grinding to a finer level or add other coffee or adjust the manual tamping phase of the coffee. D3. Over-extraction The indicator is above the `Espresso’ segment. The coffee is over-extracted. Possible causes: Grinding is too fine or the amount ground was excessive or tamping was not correct. Solutions: Adjust the coffee grinding to a coarser level or use less coffee or adjust the manual tamping phase of the coffee.
EN – 11
Use
To avoid spraying, do not remove the filter holder during dispensing: wait for a few seconds after dispensing has stopped. BURNS HAZARD!
· After dispensing, remove and clean the filter-holder by turning it clockwise.
Caution! If you would like to remove the drip tray after dispensing, wait about 30 seconds before doing so.
After approx. 10 minutes of no use, the machine goes into Energy Saving function. The stand-by time can be modified as indicate din the “Auto power-off setting” paragraph.
4.5 Dispensing steam and preparing milk froth (Fig.A and E)
· Two steam intensities can be selected (38 and 39).
· Make sure that the drip tray (24) is mounted correctly.
· Put cold milk up to where the spout begins. · Position the tip of the steam wand (22) in
correspondence with the relative hole (41), and turn the lever to the ” ” icon for a few seconds to make any residual water escape and then take it back to the vertical position. · Using the rubber protection (22b) move the steam wand (22) outwards, introduce it into the jug (28) and tilt the latter slightly as shown in figure E. · Turn the lever (15) anti-clockwise to the desired steam intensity. Intensity level ” ” is recommended to heat or froth milk for beverages that require little froth such as, for example, Caffe Latte. Intensity level ” ” is recommended to
froth milk and create froth for beverages such as Cappuccino, Latte macchiato. · Once the desired temperature of the milk has been reached, re-position the lever (15) in the vertical position to interrupt the supply of steam. · Pour the steamed milk into the cups with the previously-prepared espresso.
The texture of milk can be affected by the type of milk used and the dexterity of the user. To obtain a good cappuccino, we recommend using semi-skimmed or full-fat milk at fridge temperature (about 5°C).
· To make several cappuccinos, first prepare all the coffees and then froth the milk for all of them together.
· After heating the milk, dispense steam for a few seconds,
· Clean the steam wand (22) after every time it is used, to prevent the deposit of milk residues or clogging. For complete cleaning of the steam wand, see the “Cleaning and Maintenance” paragraph.
Caution! If you would like to remove the drip tray after dispensing, wait about 30 seconds before doing so.
EN – 12
EN
Use
4.6 Dispensing hot water
· Position a recipient under the steam wand (22).
· Tur n the lever (15) clockwise, in correspondence with the ” ” icon to dispense hot water.
· Stop dispensing by re-positioning the lever (15) vertically.
4.7 C u s t o m i s a t i o n o f t h e quantity
The amount of coffee ground and dispensed can be customised for every function. Press the key 11, 12, 13 or 14 for 3 seconds on the basis of the function to be customised. The selected key lights up flashing; if the `sound’ function is active, the machine emits a double sound to signal the start of modification of the pre-set program. · When the desired quantity has been
reached, press the key selected again. The key flashes 3 times and an acoustic signal will indicate the memorisation of the quantity.
To reset the manufacturer’s original settings, add in hold keys (12) and (13) at the same time for at least 10 seconds. All of the keys flash at the same time and the machine emits a single sound indicating that factory settings have been reset.
5 Machine settings
The programming menu can be used to set: – Auto power-off time (Stand-by) – Water hardness – Coffee temperature – Pre-brewing profiles To access the programming menu, press keys (11) and (14) at the same time for 5 seconds. All of the keys flash simultaneously. · To make the settings relative to the auto
power-off times, press the key (11). · To set the level of water hardness, press the
key (12). · Press key (13) to set the extraction
temperature. · To set the desired pre-brewing times, press
the key (14).
Auto power-off time After approx. 10 minutes of no use, the machine goes into Eco mode. Proceed as follows to change this setting: · Access the programming menu as indicated
previously. · Press the key (11), it will flash 3 times to
indicate selection. · The current setting is shown with the keys
switching on, as shown in the following table:
Key
Auto power-off time set
11
Eco Mode (10 minutes)
11.12
30 minutes
11,12,13
40 minutes
11,12,13.14 60 minutes
EN – 13
Use
· Press the key corresponding to the desired setting to modify the time, as indicated in the table.
Key
Auto power-off time to be set
11
Eco Mode (10 minutes)
12
30 minutes
13
40 minutes
14
60 minutes
· The key selected will flash 3 times and a sound will be emitted (if the acoustic signals are active) to indicate the setting has been saved.
Water hardness The machine is factory set to “Hard Water Level”. The machine can be set according to the actual hardness of the water used, thus making the requirement for descaling less frequent. If you don’t know the water hardness, use the test strip supplied (17) and follow the instructions below: · Remove the reactive strip supplied (17) from
its packaging. · Fully submerge the strip in a glass of water
for about one second. · Remove the strip from the water and shake
it slightly. Read the results after about one minute. · If 5 blue stripes appear on the strip, select “light water” settings. · If 1 or 2 pink stripes appear on the strip, select the “medium water” setting. · If 3 or 4 pink stripes appear on the strip, select the “hard water” setting. · If 5 pink stripes appear on the strip, select the “very hard water” setting.
Proceed as follows to change the setting: · Access the programming menu as indicated
previously. · Press the key (12), it will flash 3 times to
indicate selection. · The current setting is shown with the keys
switching on, as shown in the following table:
Key
Water hardness set
11
Soft water
11.12
Medium water
11,12,13
Hard water
11,12,13.14 Very hard water
· Press the key corresponding to the desired setting to modify the hardness, as indicated in the table.
Key 11 12 13 14
Water hardness to be set Soft water Medium water Hard water Very hard water
· The key selected will flash 3 times and a sound will be emitted (if the acoustic signals are active) to indicate the setting has been saved.
Temperature of the coffee The machine is pre-set to extract coffee at an Optimal temperature, which defines the temperature in the cup.
EN – 14
EN
Use
Proceed as follows to change the setting: · Access the programming menu as indicated
previously. · Press the key (13), it will flash 3 times to
indicate selection. · The current setting is shown with the keys
switching on, as shown in the following table:
Key
Temperature set
11
Low
11.12
Medium
11,12,13
Excellent
11,12,13,14 High
· Press the key corresponding to the desired setting to modify the temperature, as indicated in the table.
Key
Temperature to set
11
Low
12
Medium
13
Excellent
14
High
· The key selected will flash 3 times and a sound will be emitted (if the acoustic signals are active) to indicate the setting has been saved.
Pre-brewing profiles The machine is set with a Standard prebrewing mode. Proceed as follows to change this setting: · Access the programming menu as indicated
previously. · Press the key (14), it will flash 3 times to
indicate selection.
· The current setting is shown with the keys switching on, as shown in the following table:
Key
Set pre-brewing profile
11
Short pre-brewing
11.12
Standard pre-brewing
11,12,13
Long pre-brewing
11,12,13,14 Gradual pre-brewing
· Press the key corresponding to the desired setting to modify the pre-brewing profile, as indicated in the table.
Key Pre-brewing profile to set
11
Short pre-brewing
12
Standard pre-brewing
13
Long pre-brewing
14
Gradual pre-brewing
· The key selected will flash 3 times and a sound will be emitted (if the acoustic signals are active) to indicate the setting has been saved.
When using double wall filters (31a-31b), we suggest setting the “Short pre-brewing” profile.
Acoustic signals The machine is pre-set with acoustic signals off. They can be turned on by pressing buttons (11) and (13) at the same time for 5 seconds.
Reset factory settings To reset the factory settings, press keys (12) and (13) simultaneously for 10 seconds.
EN – 15
Cleaning and maintenance
6 Cleaning and maintenance
6.1 Warnings
Electrocution hazard. · Remove the plug from the power
outlet before cleaning the coffee machine. · Never immerse the coffee machine in water or other liquids. · Allow the coffee machine to cool down before cleaning.
Risk of damage to the surfaces. · Do not use steam jets to clean
the coffee machine. · Do not use cleaning products
containing chlorine, ammonia or bleach on parts with metal surface finishes (e.g. anodised, nickel or chrome-plated). · Do not use abrasive or corrosive detergents (e.g. powder products, stain removers and metallic scourers). · Do not use rough or abrasive materials or sharp metal scrapers.
To make cleaning easier, it is possible to scan the QR code present on the base under the drip tray, which links to a dedicated web section on Installation and Cleaning (fig. J).
6.2 Cleaning the machine body
To keep the external surfaces in good condition, clean them regularly after all use and when they have cooled down. Clean with a soft, damp cloth.
Do not use cleaning products containing chlorine, ammonia, bleach or alcohol.
Do not use abrasive or corrosive detergents (e.g. powder products, stain removers and metal scourers).
6.3 General cleaning (Fig.A)
To ensure good machine operation, in addition to excellent quality beverages, a few simple daily cleaning operations are recommended, such as cleaning the filter-holder (20) and relative filter inside, the drip tray (24) and coffee grounds collection tray (25). It is also recommended that some specific machine components such as the water tank (7) and the coffee bean container (3) are cleaned regularly.
Only the cup grill (26) and the jug (28) are dishwasher safe.
Cleaning the portafilter (20) and filters (30a, 30b, 31a, 31b) · Remove the filter from the portafilter (20)
and rinse under running water. · Dry the components thoroughly and re-
mount.
Cleaning the drip tray (24) and the grounds collection tray (25) The drip tray (24) is equipped with a red float (27) which projects from the cup holder grill when the maximum liquid level is exceeded.
EN – 16
Cleaning and maintenance
EN
· Remove the cup grill (26), the tray (24) and the coffee grounds collection tray (25).
· Empty and rinse under running water, use neutral washing up liquid if necessary.
· Dry components and reassemble in the machine.
Cleaning the coffee bean container (3) and of the grounds (18) (Fig.A e F) · Switch the machine on. · Make sure the coffee bean container (3) is
empty and then press the key (12) to remove any coffee residues from the grinder. · Switch the machine off and remove the plug from the outlet. · Remove the coffee bean container (3) by turning it anti-clockwise until the ” ” ” ” references are matched with the indicator (5) and then lift it. · Remove any coffee beans present in the grinder using the cleaning brush (33) supplied. · Lift the handle (42) of the upper grinder (18a) and turn it clockwise to remove it. · Clean the upper grinder (18a) and the lower grinder (18b) using the brush supplied (33) if necessary. · Re-mount the upper grinder (18a) by matching the two notches ” ” ” ” and turn it anticlockwise to fix it ” “” “. · Clean the coffee beans container (3) using a damp cloth and re-mount it by matching the references ” ” ” ” with the indicator (5) and then turn it clockwise to attach it.
Thanks to the Twist & Lock system, it is possible to remove the coffee beans container (3) even if there are coffee beans inside and just clean the grinders (18).
Cleaning the water tank (7) · Remove the tank lid (6) and remove the tank
from the machine using the relevant handle. · Clean the tank under running water, dry it
externally and re-mount it.
Cleaning the steam wand (22) (Fig.H) Clean the steam wand (22) immediately after use. · Position the tip of the steam wand on the
cup grill in correspondence with the relative hole, turn the lever (15) to the ” ” / ” ” icon for a few seconds to make any milk remaining inside escape and then take it back to the vertical position. · Dry the steam wand (22) using a damp cloth.
Let the steam wand cool down before cleaning. BURNS HAZARD!
· Check that the steam exit hole is not blocked. In the case of any deposits, clean the steam exit hole using the relevant needle supplied (34a).
Cleaning the dispensing unit (20) (Fig.G) · Insert the single wall filters for double coffee
(31b) into the portafilter (20) · Insert the cleaning disk (32) supplied and
a detergent capsule inside the filter (31b). Use detergent capsules for household coffee machines, which can be found on the market.
· Attach the filter-holder (20) into the dispensing unit (21) and empty the drip tray (24).
· Fill the tank (7) with fresh water up to max. · Hold keys (11) and (14) down for 5
seconds. · Press the button (14) for 5 seconds. When
the button (14) flashes with an orange light,
EN – 17
Cleaning and maintenance
press it again to start the dispensing unit cleaning cycle. · The machine will proceed with pulse dispensing to clean the dispensing unit (21). Overall, the operation takes approx. 10 minutes. The button (14) flashes indicating that the procedure is in progress. · At the end of the procedure all the keys will light up with a fixed light and the machine will emit a double sound, if the acoustic signals are active. · Remove the portafilter (20) and check that the detergent has dissolved completely. If this is not the case, repeat the operation. · At the end, remove the portafilter (20) and the cleaning disk (32) inside. · Before dispensing a coffee beverage, attach the portafilter (20) again with the filter (31b) to the dispensing unit (21) and press the button (14) to rinse the circuit.
6.4 Descaling (Fig.B-I)
Before performing the descaling cycle, remove any water softener filters present inside the tank (7).
Stay near the machine for the entire duration of the descaling cycle since you may be required to fill the tank, for example. The entire descaling and rinsing cycle lasts approximately 40 minutes.
The coffee machine signals when it is necessary to carry out a descaling cycle on the basis of the water hardness set (For setting of the water hardness, see the “Setting water hardness” paragraph). If the button (14) lights up with a fixed orange light, it means that a descaling cycle is necessary, so as not to alter the taste of the coffee and damage the machine. However, coffee, steam/hot water can continue to be dispensed. Proceed as follows to perform the descaling cycle: · Remove the portafilter (20) from its seat · Place a container with a capacity of at least
600 ml under the dispensing unit (21) and another with a capacity of at least 600 ml under the steam wand (22). · Fill the tank (7) to level 1 L indicated on the back of the tank and add a dose of descaler indicated by the manufacturer for 1 litre of water. · Press keys (11) and (14) simultaneously for 5 seconds to enter the programming menu. · Turn the lever (15) anti-clockwise to the steam intensity position ” “. · Buttons (11), (12) and (13) switch off, while the button (14) flashes with an orange light. · Press (14) to start the descaling cycle.
EN – 18
EN
Cleaning and maintenance
During the descaling cycle, the machine will make a few pauses to allow the descaler to act effectively Wait for the end of the cycle. · The descaling cycle ends when the button (14) turns white. · Remove the tank (7) and thoroughly rinse it under running water to remove any traces of descaler. · Re-mount the tank and fill it up to “MAX” with clean water to perform the rinse cycle, then press the key (14) to start this cycle. The button (14) flashes. · The rinse cycle ends when the key (14) lights up with a fixed white light. · Re-position the lever (15) in the vertical position. The machine is ready for use again. Personal injury hazard. · The descaler contains acids that
can irritate the skin and eyes. · Follow the manufacturer’s
instructions and safety warnings on the packet scrupulously in the event of contact with skin or eyes. · Use descaler products recommended by Smeg to prevent damage to the coffee machine.
EN – 19
What to do if…
Problem
The appliance does not work.
No coffee is dispensed from the nozzles.
Coffee starts dispensing during pre-brewing.
Possible causes
Solution
Unplugged.
Plug in.
Possible fault.
No water in the tank (7). The keys (13-14) flash. The filter holes (11-12-1314) are blocked. The tank (7) is not inserted correctly or is empty.
Unplug the coffee machine and contact an authorised after-sales Centre. Fill the tank (7).
Clean the filter (11-12-1314) with a brush or the pin supplied. Insert the tank (7) correctly and make sure it contains water.
Lime scale build-up.
Perform a descaling cycle.
The manometer indicates an over-pressure. The ground coffee is too fine. Excessive tamping.
Make the coffee again introducing less powder or coarser powder. Adjust grinding level to a thicker level. Tamp the coffee with less force.
You are using too much coffee. The dispensing unit (21) is clogged or dirty.
Not enough coffee or the coffee in the filter-holder (20) is too fine. The coffee has not been tamped sufficiently.
Reduce the amount of coffee.
Run the dispensing unit cleaning cycle as indicated in paragraph 6.3 General cleaning under item “Dispensing unit cleaning”. Adjust quantity and grinding level.
Tamp coffee more in the tamping phase.
EN – 20
EN
What to do if…
Problem
The coffee drips from the portafilter (20) and not from the nozzles.
The portafilter (20) will not attach to the coffee machine. The coffee machine does not work and all the LEDS flash.
The coffee is light in colour and comes out of the nozzle quickly.
The coffee is dark in colour and comes out of the nozzle slowly.
The keys (11) and (12) flash for a few seconds.
Possible causes
The portafilter (20) is not attached correctly or is dirty. The dispensing unit gasket is worn. The nozzle holes are blocked. The filter has been overfilled.
Possible fault.
The ground coffee has not been tamped sufficiently. There is insufficient ground coffee. The ground coffee is too coarse. The ground coffee has been tamped too hard. There is too much ground coffee. The dispensing unit (20) or the filter (30a-30b-31a31b) are clogged . The ground coffee is too fine. Lime scale build-up. No coffee beans container (3). Coffee grinder overheated.
Solution
Attach the portafilter (20) and rotate it fully home. Clean the portafilter (20). Have it replaced at an authorised After-sales Centre.
Clean the nozzle holes.
Check the amount of coffee dosed.
Unplug the coffee machine and contact an Authorised After-sales Centre. Tamp the coffee harder.
Increase the amount.
Set grind to a finer level.
Tamp the coffee with less force. Reduce the amount used.
Clean the dispensing unit (20) and the filter (30a-30b31a-31b). Set grind to a coarser level.
Perform a descaling cycle. Mount the container correctly (3). Wait until the machine cools.
EN – 21
What to do if…
Problem
Keys (13) and (14) flash simultaneously.
The coffee is not hot.
Possible causes
No water in the tank or no tank inserted (7). The steam lever (15) is set to hot water or steam. Machine not used for a long period of time.
Low set temperature.
The cups have not been pre-heated.
Solution
Make sure the tank (7) is assembled correctly and verify whether it contains water.
Position the lever (15) in the vertical position.
Increase the temperature of the coffee from the programming menu following that indicated in the “Setting the coffee temperature” paragraph. Dispense hot water into the same cup in which the coffee will be prepared in order to heat the cup.
Open the programming menu and change the extraction temperature as indicated in paragraph 5. Machine settings under item “Coffee temperature”.
Heat cups by rinsing them with hot water (Note: the hot water function can be used).
Insufficient steam.
The steam wand is dirty.
Thoroughly clean the steam wand removing the steel nozzle and following the instructions in the manual. Note: the quality of the froth depends on the type of milk used, its temperature and the technique used/manual dexterity.
EN – 22
EN
What to do if…
Problem
Possible causes
Keys (13) and (14) flash in sequence. The machine did not reach the steam dispensing temperature. Lime scale build-up.
Solution
Wait for the temperature to be reached.
Perform a descaling cycle.
The machine does not dispense steam.
No water in the tank (7).
Fill the tank (7).
The lever (15) is not correctly Turn the lever (15) to the desired positioned on the steam icons steam intensity icon. ” / “.
Possible fault.
Contact an authorised after-sales centre.
The machine looses water from the base.
Drip tray inserted incorrectly. Drip tray full.
Check and introduce it well. Empty the drip tray.
Water tank not introduced Introduce the tank into its seat
correctly.
correctly.
The coffee grinder does not No coffee beans container Insert the coffee beans container
work.
(3).
(3).
No coffee beans.
Pour beans into the container (3).
Grinder (18) blocked.
Remove the grinder (18) with the
machine off and check for ele-
The appliance works but
ments that block rotation.
does not dispense ground Duct or grinders (18) clogged. Clean the duct or grinders (18)
coffee.
with the machine off using the
specifically supplied brush (33).
Grounds too fine.
Adjust the grinding level by turning the container (3) counter-clockwise.
EN – 23
What to do if…
Problem
Possible causes
Solution
The top of the grinder (18) is Place and secure the grinder
missing.
Incorrect or difficult grind-
ing level settings.
Grinders (18) worn.
(18) top.
Replace the grinders (18) taking the appliance to an authorised
after-sales centre.
The grinder duct is dirty.
Clean the dispensing zone from
underneath with the supplied
Ground flow is irregular
brush (33).
during grinding.
Possible anti-static system fault. Contact an authorised after-sales
centre.
The coffee bean container cannot be repositioned.
Presence of coffee beans on the grinder ring.
Clean the coffee bean container using the relevant cleaning brush supplied.
Internal grinder incorrectly in- Correctly install the grinder. stalled.
The coffee only escapes from one of the two nozzles.
The coffee is not pressed well. The filter-holder (20) is dirty.
Check horizontal pressing is performed.
Clean the filter-holder (20) and its filters.
The nozzles are clogged.
The nozzles were not
Clean the nozzles well.
cleaned after dispensing.
The cycle was not completed. Make sure the descaling cycle
completes and then rinse as in-
dicated in paragraph 6.4 Des-
A descaling cycle was run
caling.
by the machine does not
work.
Water was not added to level Add water to the tank (7) to com-
1L indicated on the back of plete the cycle.
the tank during the descaling
cycle.
Contact local technical support if the problem is not solved or in case of other types of faults.
EN – 24
Documents / Resources
 |
smeg EGF03PBUS Retro Semi Automatic Espresso Machine [pdf] User Manual EGF03PBUS Retro Semi Automatic Espresso Machine, EGF03PBUS, Retro Semi Automatic Espresso Machine, Automatic Espresso Machine, Espresso Machine, Machine |