SW098 Smart Watch Smarty 2.0 Amoled Unisex User Guide

Charging and Activation:
Before first-time use, charge and activate the watch using the magnetic charger. Attach the charger to the metal contacts on the back of the watch and plug the other end into a USB charging head or computer USB port (Use 5V1A or below charger).

Introduction to Functions:

Sleep: Wear the Smart Watch during sleep to track hours slept and sleep quality.
Heart Rate Test: The watch records heart rate all day; tap on the page to start measuring heart rate.

SpO2 Test: Measure your SpO2 by tapping on the SpO2 page.
Menstrual Cycle: Track menstrual cycle function for body status monitoring.

Sports: Automatically tracks steps and calories taken on the screen.

Connecting the Watch:

Open the APP and set up your profile.
Go to Device and click Add Device.

Select your device from the scanned devices list to complete binding.

Operating Instructions:

Control Center: Swipe in different directions for various functions.
Custom Card: Access messages and other features by swiping on different directions.

Frequently Asked Questions (FAQ)

Q: How do I reset the sleep stats on the watch?
A: Sleep stats reset to zero at 8:00 pm automatically.

Q: When do movement stats reset to zero on the watch?
A: Movement stats reset to zero at midnight daily.

Please consult this manual before using the product.
V1.0

Downloading the APP

Scan the following QR code, download and install the APP.

Download and install the APP.

Connecting the watch

Open the APP and set up your profile
Go to the “Device”, Click “Add Device”

Click on your device in the scanned devices list Binding completed

Make sure the Bluetooth of your cell phone is turned on
Show the “MAC” address of your watch in “Settings” – “About”.
When the watch is linked to the APP for the first time, wait for a pop-up message to allow the watch to use Bluetooth permission (if you have accidentally restored the factory settings of the watch, please repeat the above operation to connect the watch).
If the watch is turned on for more than 120 seconds without connecting to the APP, the watch will automatically turn off the Bluetooth. If you want to connect the APP at this time, you need to turn on the Bluetooth switch in the “Settings”-“Watch” of the watch, and then do the above operation.

Charging and activation of the watch

The watch needs to be charged and activated before using it for the first time;
Use the matching magnetic charger to attach to the metal contacts on the back of the watch. The other end of the charger can be plugged into a USB charging head or computer USB port.

(Please use 5V1A and below charger to charge the device)

Operating instructions for the watch

Introduction to the functions of the watch

Sleep

If you keep wearing Smart Watch in your sleep , it can provide the hours slept and quality of sleep stats on both the screen and the APP.

NOTE: Sleep stats reset to zero at 8:00 pm. Heart Rate Test
The Smart Watch could record your heart rate all day.You also could tap on the page to start measuring heart rate.SpO2 Test
Tap the SpO2 page to start measuring your SpO2. On the SpO2 page, lt can show the SpO2 measured data of the last times.

Menstrual Cycle
Click on the function of menstrual cycle to measure the current body status. More detailed information and data logging can be viewed on the client side

Sports
Smart watch automatically tracks steps and calorie taken on the screen.

NOTE: Your movement stats reset to zero at midnight.

Drinking Water Reminder
The smart watch will remind you “Time to Drink Some Water” at the planned drinking time.

Note: You can set the feature in the APP Weather
It could show the weather info of current and tomorrow on the weather page. Weather info is synced after connecting with the APP it will not be updated after a long disconnect.

Message Reminder

The watch can accept notification pushes on the display phone, and you can set the push APP on/off switch in DAFIT.

The watch page can store the last 8 message records. (Messages can be viewed, but the watch cannot edit and reply to messages)

Remote Shutter

After connecting to your phone, the watch can remotely control your phone’s camera to take photos.

After opening the camera on your phone, tap on the watch camera control page to trigger the camera shutter to take a picture.

Player Shutter Wireless Call
After connecting the device, you can remote contral the music player on your phone.

Other Features
Other features include stop watch, alarmn, timer brightness ,mute on/off theater mode, factory reset, power of and about.

Alarm
Alarms can be set in the APP or the watch, up to 8 alarms can be set. The watch will display an alarm icon and vibrate at the set time.

Stop Watch
Tap the start button on stop- watch page to start timing, and tap the stop button to stop timing

Sedentary Reminder
The device will vibrate to remind you to make a relax after 1 hour setting.

Note: You can switch on/off the feature in the APP.Wireless Call
Open the APP to link the Wireless of the watch, and after synchronizing the phone, you can make, answer or reject calls on the watch.

FQA

Why the watch can’t receive push notifications?

Android phone settings:

Confirm that the message push switch is turned on in the mobile
Confirm that the message can be displayed in the notification bar of the mobile. The device message is dependent on reading the message in the notification bar of the mobile. The device will not be able to receive the push message if there is no notication on the mobile. (You need to find the notification settings in the mobile. ancturn on the switch of WeChat, QQ phone call, SMS and so on)

Open the accessibility settings of the device.
(Find the accessibility function in the phone settings, and turn on the accessibility settings of the device)
iPhone Settings:
1. Confirm that the message push switch is turned on in the mobile.
2. Confirm that the message can be displayed in the notification bar of the mobile. (You need to find the notification settings in the mobile and turn on the switch of WeChat, QQ phone call, SMS, and so on)

Why can’t wear a watch in a hot bath?
The temperature of the bath water is relatively high, and a lot of water vapor will be generated, and the water vapor is in the gas phase, and its molecular radius is small.lt’s easy to penetrate through the gap of the device case. When the temperature drops it will condense into liquid water droplets again, which will easily cause a short circuit internal and damage the circuit board, and then damage the whole device.

Why is the measurement data sometimes inaccurate?
Affected by extemal factors (such as low blood perfusion more arm hair tattoos, darker skin, drooping arms, arm shaking,low temperature, etc,), the measurement result may be inaccurate or the value may not be available. The charging head must not be in contact with the metal when charging to avoid danger caused by short circuits! Please unplug the charger in time when the battery is full. This app is not a medical device. Data obtained during the use of this app is for reference only, and should not be used for clinical diagnosis, medical research, diagnostic, or treatment purposes.

Information to User

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recep- tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Important: Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.

Documents / Resources

SMARTY SW098 Smart Watch Smarty 2.0 Amoled Unisex [pdf] User Guide
SW098 Smart Watch Smarty 2.0 Amoled Unisex, SW098, Smart Watch Smarty 2.0 Amoled Unisex, Smarty 2.0 Amoled Unisex, Amoled Unisex, Unisex

References

User Manual

SW098 Smart Watch Smarty 2.0 Amoled Unisex

Product Information

Product Usage Instructions