C4 Link2 Programmer
“
Specifications
- Product: C4 LINK2 PROGRAMMER
- Version: 1.0
- Date: March 3, 2025
Product Usage Instructions
1. Overview
This document provides step-by-step instructions for
downloading, installing, and using the Link2 Programmer with C4
controllers. It explains how to load software onto the C4
controller using the Link2 Programmer.
2. Required Tools for Software Programming
The following tools are required to program the software:
- A laptop with a Windows-based operating system.
- The Link2 Programmer.
- Controller software: The original controller software is stored
on a flash drive inside the white job binder. If the flash drive is
missing or contains outdated prints and software, Smartrise can
provide a weblink to access the latest software and prints.
3. Application Download Instructions
To load software onto the Smartrise controller, the programming
application must be downloaded to the laptop. Follow these steps to
download the C4 Link2 Programmer application:
- Locate and open the C4 Programmer folder.
- Download and run both applications on the laptop. Some laptops
may have firewalls that prevent applications from downloading. For
assistance, contact the system administrator. - Once completed, the two applications should appear on the
desktop. NOTE: MCUXpresso does not need to be opened, only
installed on the laptop.
4. Software Loading Instructions
To ensure proper functionality, the controller software must be
loaded onto the Smartrise controller using the Link2 Programmer.
Follow the steps below to complete the process:
- Connect the Link2 Programmer to the laptop via the USB
port. - Open the C4 Link2 Programmer by double-clicking its icon. The
application will automatically update to the latest version if
connected to the internet. Ensure the application is up to date
before proceeding. - Browse for the controller software:
- Select the folder with the job name.
- Choose the Car to load software for.
- Click Select Folder at the bottom of the window.
- Select the processor to update using the dropdown menu.
Processors can be updated in any order:- MR A: MR MCUA
- MR B: MR MCUB
- SRU A: CT and COP MCUA
- SRU B: CT and COP MCUA
- Riser/Expansion: Riser/Expansion board
- Start the software loading process by clicking the Start
button. - Important: When programming the MR SRU, other cars in the group
may be affected. To prevent this, disconnect the group terminals on
the board. - A new window will appear, and the software download will begin.
Once complete, a confirmation message will be displayed.
FAQ
Q: What should I do if I encounter issues with downloading or
running the applications?
A: If you face any difficulties with downloading or running the
applications, please contact your system administrator for
assistance.
Q: How can I ensure that the application is up to date before
proceeding with loading software onto the controller?
A: Ensure that your laptop is connected to the internet when
opening the C4 Link2 Programmer to allow for automatic updates to
the latest version of the application.
“`
.. Table of
C4 LINK2 PROGRAMMER Contents__
INSTRUCTIONS
VERSION 1.0
Date March 3, 2025
Version 1.0
Summary of Changes Initial Release
.. Document History _
.. Table of Contents__
1 Overview…………………………………………………………………………………………………………………………………………. 1 2 Required Tools for Software Programming…………………………………………………………………………………………… 1 3 Application Download Instructions…………………………………………………………………………………………………….. 2 4 Software Loading Instructions …………………………………………………………………………………………………………… 3
Page intentionally left blank.
..C4 Link2 Programmer Instructions.. ` `
1 Overview
This document provides step-by-step instructions for downloading, installing, and using the Link2 Programmer with C4 controllers. It explains how to load software onto the C4 controller using the Link2 Programmer.
2 Required Tools for Software Programming
The following tools are required to program the software: 1. A laptop with a Windows-based operating system.
2. The Link2 Programmer.
3. Controller software: The original controller software is stored on a flash drive inside the white job binder. If the flash drive is missing or contains outdated prints and software, Smartrise can provide a weblink to access the latest software and prints.
2025 © Smartrise Engineering, Inc. All Rights Reserved
1
..C4 Link2 Programmer Instructions.. ` `
3 Application Download Instructions
To load software onto the Smartrise controller, the programming application must be downloaded to the laptop. This application is available on the flash drive. Follow these steps to download the C4 Link2 Programmer application:
1. Open the flash drive. 2. Navigate to (5) Smartrise Programs and open the folder.
3. Locate and open the C4 Programmer folder.
4. Download and run both applications on the laptop. Some laptops may have firewalls that prevent applications from downloading. For assistance, contact the system administrator.
5. Once completed, the two applications should appear on the desktop. NOTE: MCUXpresso does not need to be opened, only installed on the laptop.
2025 © Smartrise Engineering, Inc. All Rights Reserved
2
..C4 Link2 Programmer Instructions.. ` `
4 Software Loading Instructions
To ensure proper functionality, the controller software must be loaded onto the Smartrise controller using the Link2 Programmer. Follow the steps below to complete the process:
1. Connect the Link2 Programmer to the laptop via the USB port.
2. Open the C4 Link2 Programmer by double-clicking its icon. The application will automatically update to the latest version if connected to the internet. Ensure the application is up to date before proceeding.
3. Browse for the controller software:
2025 © Smartrise Engineering, Inc. All Rights Reserved
3
..C4 Link2 Programmer Instructions.. ` `
i. Open (1) Controller Software.
ii. Select the folder with the job name.
iii. Choose the Car to load software for.
2025 © Smartrise Engineering, Inc. All Rights Reserved
4
..C4 Link2 Programmer Instructions.. ` `
iv. Click Select Folder at the bottom of the window.
4. Select the processor to update using the dropdown menu. Processors can be updated in any order: MR A: MR MCUA MR B: MR MCUB SRU A: CT and COP MCUA SRU B: CT and COP MCUA Riser/Expansion: Riser/Expansion board
2025 © Smartrise Engineering, Inc. All Rights Reserved
5
..C4 Link2 Programmer Instructions.. ` `
Processor connections can be found on the board.
MR SRU Connection
CT/COP Connection
5. Start the software loading process by clicking the Start button.
2025 © Smartrise Engineering, Inc. All Rights Reserved
6
..C4 Link2 Programmer Instructions.. ` `
Important: When programming the MR SRU, other cars in the group may be affected. To prevent this, disconnect the group terminals on the board.
6. A new window will appear, and the software download will begin. Once complete, a confirmation message will be displayed.
2025 © Smartrise Engineering, Inc. All Rights Reserved
7
..C4 Link2 Programmer Instructions.. ` `
NOTE: If the software fails to download, try the following:
i. Retry the process. ii. Use a different USB port. iii. Power cycle the controller. iv. Ensure the Link2 Programmer is properly connected. v. Restart the laptop. vi. Try a different Link2 Programmer. vii. Use a different laptop. viii. Contact Smartrise for assistance.
7. Click Edit to continue loading software for the remaining processors and follow the previous steps.
8. Once all software uploads are complete, reconnect the group terminals and power cycle the controller.
9. Verify the software version under Main Menu | About | Vers.
10. Scroll down to view all options and confirm the expected version is displayed.
JOB NAME SRU BOARD CAR LABEL JOB ID: ######## VERS. ##.##.## © 2023 SMARTRISE
2025 © Smartrise Engineering, Inc. All Rights Reserved
8
Documents / Resources
 |
SMARTRISE C4 Link2 Programmer [pdf] Instructions C4 Link2 Programmer, C4, Link2 Programmer, Programmer |