RS 2 Focus Control Dual Handle
“
Specifications
- Product Size: 66.31mm x 73.33mm x 208.49mm
- Product Weight: 45.68mm x 65.37mm
- Material: Not specified
- Recommended Charging Ambient Temperature: Not specified
- Rated Power: Not specified
- Maximum Allowable Input Current: Not specified
- Allowable Input Voltage Range: Not specified
Product Information
The Focus Control Dual Handle is designed for DJI RS series
stabilizers. It features various controls including a joystick,
record button, mode switching, sleep mode, display, trigger, scroll
wheel, sliders, QD interface, cold shoe mount, wrist strap hole,
locking knob, M4 anti-slip screw, limit column, pin, and
positioning holes.
Product Function
- Mode indicator for different modes
- 360-degree rotation mode
- Vertical shooting mode
- Lock Mode
- Joystick calibration indicator
- Power on/off button
Product Usage Instructions
- On the left side of the stabilizer, tighten the handle
connecting arm with the screw. - The mounting knob must be tightened securely.
- Power on the handle which will automatically activate.
- Operate the handle functions and stabilizer functions as
needed.
FAQ
Q: Can this dual handle be used with other stabilizers apart
from DJI RS series?
A: No, this product is specifically designed for use with DJI RS
2 / RS 3 Pro / RS 4 / RS 4 Pro stabilizers only.
Q: What should I do if I encounter a connection issue?
A: Ensure that the slider on the left side of the DJI stabilizer
is connected and tightened properly with the knob using a wrench.
If the issue persists, contact the purchasing platform for
after-sales processing.
Q: How do I know if the joystick calibration is
successful?
A: The display will indicate successful calibration by showing a
specific icon. If calibration fails, a different icon will be
displayed.
“`
Focus Control Dual Handle for DJI RS Series Operating Instruction
· Thank you for purchasing SmallRig’s product. · Please read this Operating Instruction carefully. · Please follow the safety warnings.
Warning
· Please keep the product dry and avoid contact with water or other liquids. · Do not use the product in high temperature, humid, or dusty environments. · Keep the product away from flammable materials and avoid prolonged use. · If any damage is found on the product, please stop using it immediately and contact the after-sales service department for repair or replacement.
Do not disassemble the product. If you suspect there is any problem with the product, please contact the purchasing platform to apply for after-sales processing; Only by connecting the slider on the left side of the DJI stabilizer and tightening the knob with a wrench can the product control the DJI stabilizer correctly; This product is dedicated to controlling DJI RS 2 / RS 3 Pro / RS 4 / RS 4 Pro stabilizer.
In the Box
Stabilizer and coke pot handle × 1
Guarantee Card
× 1
Compatibility
DJI RS 2 / DJI RS 3 Pro / DJI RS 4 / DJI RS 4 Pro
Product Dimension
66.31mm
73.33mm
208.49mm 208.49mm
45.68mm
65.37mm
Product Details
Joystick Record button Mode Switching Sleep Mode Display Trigger
Scroll Wheel Sliders QD interface Cold shoe mount Wrist strap hole Locking knob
M4 anti-slip screw Limit column Pin 1/4″-20 positioning hole 1/4″-20 threaded hole 3/8″-16 positioning hole
Product Function
1. Joystick: Push the joystick up and down to control the gimbal’s pitch axis movement, and push the joystick left and right to control the gimbal’s translation axis movement. Joystick calibration method: [Press the trigger button three times in a row, and keep pressing the fourth time. The calibration icon will be displayed on the screen . Then the joystick will rotate more than 6 circles at the extreme position and stop. The joystick will stay in the middle position for 20 seconds without any operation, waiting for the calibration to complete. If the calibration fails, the calibration error will be displayed and recalibration is required. If the calibration is successful, it will not be displayed. 2. Recording/Photographing Button: This button has two strokes. Pressing it lightly (the first stroke) controls the camera to autofocus, and pressing it hard (the second stroke) controls the camera to start recording. After recording starts, the recording time is displayed. Pressing it again stops recording, and pressing it hard and long controls the camera to take photos. 3. Mode switch (M key): Single-click to switch modes, double-click to enter/exit vertical shooting mode (RS 4 /RS 4 Pro does not have this function), triple-click to enter/exit 360° rotation mode, long-press the M button to enter/release to exit sports mode, and double-click the trigger button while long-pressing M to lock (exit lock) sports mode. 4. Sleep mode: Single or double-click the power button to enter /exit sleep mode. 5. Display screen: Displays the current mode of the controller. The screen lights up to indicate a normal connection. 6. Trigger button (return to center/lock ): Single click: install DJI LiDAR focus rangefinder or Ronin image transmission and turn on, turn on or off ActiveTrack; Double click: return the gimbal to center; Triple click: enter selfie mode; Long press: lock the gimbal’s three axes; Long press the trigger button and click the M button to lock or exit the lock gimbal (lock without pressing the trigger button). 7. Scroll wheel: The default function is to control focus/zoom by wire. You can change the settings on the touch screen of the DJI RS 2 / RS 3 Pro / RS 4 / RS 4 Pro stabilizer. You can set it to focus motor, control focus/zoom by wire, adjust the camera ISO, aperture, shutter speed, and control the roll axis, pan axis or pitch axis. You can change the corresponding scroll wheel speed, smoothness, and forward and reverse direction according to the settings on the touch screen; 8. Slide bar: The side slide bar can be expanded with focus wheel, mobile phone holder, monitor and other equipment. 9. QD interface: There is a QD interface on the right slider, which can be used to connect the stabilizer shoulder strap 4118. 10. Cold shoe mount: 2905B can be used to connect a 5-inch monitor. The interface can only bear 1kg and cannot be overloaded. 11. Wrist strap hole: PAC2456B can be used to make holding more comfortable and safer. 12. Locking knob: After loosening the knob, control the angle of the handle. 13. M4 anti-slip screw: must be connected to the left slider of the stabilizer. 14. Limit column: The limit column must correspond to the Nato interface on the DJI stabilizer, otherwise the stabilizer cannot be controlled. 15. Pin: Do not be too violent during disassembly or assembly, otherwise the Pin interface will be damaged.
Icons .
. . . ”
“, ”
“,”
“Mode indicator, displayed after the stabilizer enters sleep mode” ”
”
” Icon means connected, ”
” icon means connection failed;
”
” 360 degree rotation mode;
”
” Vertical shooting mode;
”
” Lock Mode;
”
“, ”
” Displayed when entering joystick calibration , ”
“and displayed when operating
the joystick after calibration fail;
”
” Press on/off for a long time.
Product Use
On the left side of the stabilizer, tighten the handle connecting arm with the screw and the mounting knob must be tightened.
After the handle is powered on, it will automatically turn on and can be used normally according to the handle functions and stabilizer functions.
Specifications
Product size
Product weight
Material Recommended charging ambient temperature Rated power
Maximum allowable input current
Allowable input voltage range
520.0 × 66.0 × 209.0mm / 20.5 × 2.6 × 8.2in 851.0 ± 5.0g / 30.0 ± 0.2oz Aluminum alloy, Plastic 5 – 40 / 41°F – 104°F 0.5W 1A 9V-17V
Manufacturer Email: support@smallrig.com Manufacturer: Shenzhen Leqi Innovation Co., Ltd. Add: Rooms 101, 701, 901, Building 4, Gonglianfuji Innovation Park, No. 58, Ping’an Road,
Dafu Community, Guanlan Street, Longhua District, Shenzhen, Guangdong, China.
Consignor: Shenzhen LC Co., Ltd. Add: Room 201, Building 4, Gonglianfuji Innovation Park, No. 58, Ping’an Road,
Dafu Community, Guanlan Street, Longhua District, Shenzhen, Guangdong, China.
PAP
DJI RS
SmallRig
DJIDJI DJI RS 2 / RS 3 Pro / RS 4 / RS 4 Pro
× 1
× 1
DJI RS 2 / DJI RS 3 Pro / DJI RS 4 / DJI RS 4 Pro
66.31mm
73.33mm
208.49mm 208.49mm
45.68mm
65.37mm
QD
M4 Pin 1/4″-20 1/4″-20 3/8″-16
1. 620 2. / 3. M/RS 4 /RS 4 Pro /360°M/M 4. / 5. 6. /DJI LiDARRonin M 7. /DJI RS 2 / RS 3 Pro / RS 4 / RS 4 Pro /ISO 8. 9. QDQD4118 10. 2905B51kg 11. PAC2456B 12. 13. M4 14. Nato 15. PinPin
.
” . “,” . “,” . “” ”
”
” ”
”
”
” 360
”
”
”
”
”
“, ” “” “” ”
”
” /
520.0 × 66.0 × 209.0mm 851.0 ± 5.0g 5 ~ 40 0.5W 1A 9V-17V
GB4943.1-2022 : : 584101701901
: 584201
PAP
Documents / Resources
 |
SmallRig RS 2 Focus Control Dual Handle [pdf] Instruction Manual RS 2 Focus Control Dual Handle, RS 2, Focus Control Dual Handle, Control Dual Handle, Dual Handle, Handle |