MD3490 Handle Extension Rig
“
Product Information
Specifications
- Manufacturer Email: support@smallrig.com
- Manufacturer: Shenzhen Leqi Innovation Co., Ltd.
- Address: Rooms 101, 701, 901, Building 4, Gonglianfuji
Innovation Park, No. 58, Ping’an Road, Dafu Community, Guanlan
Street, Longhua District, Shenzhen, Guangdong, China - Consignor: Shenzhen LC Co., Ltd.
- Address: Room 201, Building 4, Gonglianfuji Innovation Park,
No. 58, Ping’an Road, Dafu Community, Guanlan Street, Longhua
District, Shenzhen, Guangdong, China
Product Details
Sony FX30/FX3 XLR Handle dedicated extension rig. Extend 30mm
backwards and increase grip space. Integrated Cold Shoe &
removable NATO rail. Multiple 1/4-20 & 3/8-16 & ARRI 3/8-16
Accessory Threads.
Key Features
- Compatible with Sony FX30 XLR Handle / Sony FX3 XLR Handle
- Integrated Cold Shoe & removable NATO rail
- Multiple 1/4-20 & 3/8-16 & ARRI 3/8-16 Accessory
Threads
Product Usage Instructions
Safety Guidelines
Always handle the product with care to avoid damage. Do not
expose to extreme temperatures or moisture.
In the Box
- Hex Spanner
- NATO Rail
Installing the NATO Top Handle (Lite)
- Identify the compatible Sony FX30 XLR Handle or Sony FX3 XLR
Handle. - Align the NATO Top Handle on the designated area of the XLR
Handle. - Secure the handle using the provided Hex Spanner to tighten the
screws.
Removing the NATO Top Handle (Lite)
- Use the Hex Spanner to loosen and remove the screws holding the
handle in place. - Gently lift and detach the NATO Top Handle from the XLR
Handle.
Maintenance
Regularly check the tightness of the screws to ensure the handle
remains securely attached.
FAQ
Q: Is this handle compatible with other camera models?
A: The NATO Top Handle (Lite) is specifically designed for use
with Sony FX30 XLR Handle and Sony FX3 XLR Handle only.
“`
NATO Top Handle (Lite)
Operating Instruction
SmallRig Sony FX30 /FX3 XLR Handle Extension Rig MD3490 is designed to extend the length of the FX30 /FX3 XLR Handle and add more accessory mounting interfaces.The extension rig is installed at the end of the FX30 / FX3 XLR Handle by a 1/4″-20 screw,which can extend the FX30 / FX3 XLR Handle back by 30mm.It is ergonomically designed to provide users with a comfortable grip.In addition, the extension rig is also equipped with a NATO rail, which is installed on the top of the FX30/ FX3 XLR Handle by two 1/4″-20 screws.It provides more accessory installation interfaces for shooting scenes so that you can quickly install/release monitors, EVF, etc.The extension rig has Cold Shoe ,multiple 1/4″-20, 3/8″-16 and ARRI 3/8″-16 accessory threads, providing multiple accessory mounting interfaces for shooting.In addition, the NATO rail can be removed and the extension rig can be used separate.
Safety Guidelines
1. Environment Do not use the product underwater, in extreme temperatures (e.g., freezing or direct heat), corrosive environments, or excessive dust. Dry metal parts immediately after liquid contact to prevent corrosion. 2. Load Capacity Do not exceed the maximum weight capacity indicated on the product. Overloading risks structural failure, deformation, or accidental drops. 3. Cleaning & Maintenance Clean surfaces with a dry, soft cloth. Avoid chemicals like alcohol or solvents. Ensure dry and ventilated conditions for long-term storage. 4. Structural Integrity Do not modify the product (e.g., drilling, cutting)–this compromises structural integrity and increases drop risks. 5. Malfunctions Stop use immediately if you notice deformation, unusual noises, or loose components, and contact support.
In the Box
Sony FX30 / FX3 XLR Handle Extension Rig × 1
Hex Spanner
× 1
NATO Rail
× 1
Guarantee Card × 1
Product Details
Key Features
Sony FX30/FX3 XLR Handle dedicated extension rig. Extend 30mm backwards and increase grip space. Integrated Cold Shoe & removable NATO rail. Multiple 1/4″-20 & 3/8″-16 & ARRI 3/8″-16 Accessory Threads.
Compatibility: Sony FX30 XLR Handle / Sony FX3 XLR Handle
Specifications
Product Dimensions: 118.8 x 33.7 x 28mm Package Dimensions: 105 x 95 x 30mm Net Weight: 90g±5g Package Weight: 135g±5g Material: Aluminum Alloy
Manufacturer Email: support@smallrig.com Manufacturer: Shenzhen Leqi Innovation Co., Ltd. Add: Rooms 101, 701, 901, Building 4, Gonglianfuji Innovation Park, No. 58, Ping’an Road,
Dafu Community, Guanlan Street, Longhua District, Shenzhen, Guangdong, China. Consignor: Shenzhen LC Co., Ltd. Add: Room 201, Building 4, Gonglianfuji Innovation Park, No. 58, Ping’an Road,
Dafu Community, Guanlan Street, Longhua District, Shenzhen, Guangdong, China.
FR
Papier 5
Documents / Resources
 |
SmallRig MD3490 Handle Extension Rig [pdf] Instruction Manual MD3490 Handle Extension Rig, MD3490, Handle Extension Rig, Extension Rig |