SmallRig ARRI Locating Top Handle
Thank you for purchasing SmallRig’s product.
- Please read this Operating Instruction carefully.
- Please follow the safety warnings.
In the Box
- ARRI Locating Top Handle × 1
- Guarantee Card × 1
Installation
Forward Installation
- Align the anti-rotation screws with the locating holes on both sides of the ARRI 3/8″-16 locating hole;
- Tighten the screw in the middle.
- Use a screwdriver to reinforce by inserting it into the side hole of the screw.
Reverse Installation
If the lens is too long, causing the overall balance of the device to tilt forward, you can reverse-mount the handle on the top of the cage to adjust the balance.
Specifications
| Material(s) | Aluminum Alloy, |
| Product Weight | 4.0oz 113.0g |
| Load-Bearing Capacity | 33.1lbs 15.0Kg |
| Product Dimensions | 5.0 × 2.8 × 0.9in 126.0 × 72.0 × 23.0mm |
| Connection Interface | ARRI |
| Expansion Interfaces | ARRI Expansion Interface × 1; Cold Shoe Mount × 2 |
Documents / Resources
 |
SmallRig ARRI Locating Top Handle [pdf] Instruction Manual 4757, ARRI Locating Top Handle, ARRI, Locating Top Handle, Top Handle, Handle |