Safety Instructions
Read these instructions thoroughly before using the device. Keep this instruction manual for future reference or new users. The appliance can be used by persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. The device is not intended to be used by children. Keep the appliance and its power cable out of the reach of children. Cleaning and maintenance tasks should not be carried out by children. Children must not play with the device. Check the power cable regularly for visible damage. If the mains cable is damaged, it must be replaced by the manufacturer, its customer service or similarly qualified personnel to avoid hazards. This device is designed for domestic use only and is not intended for bars, restaurants, farmhouses, hotels, motels, and offices. Do not immerse the cable, plug, or any other part of the appliance in water or any other liquid or expose electrical connections to water. Make sure your hands are dry before handling the plug or switching on the appliance. ⚠️ WARNING: the filling opening must not be opened during operation. ⚠️ WARNING: take precautions to avoid spillage of liquids on the cable. ⚠️ WARNING: incorrect or improper use can be dangerous for the user and damage the appliance. Use the appliance only for the purposes described in this manual. The surface of the heating element is subject to residual heat after use. Always disconnect the appliance from the power supply if it is left unattended and before assembly, disassembly, or cleaning. It is your responsibility to ensure every user is informed about the warnings and precautions stated in this manual. Do not use the appliance for any use other than specified. Ensure mains voltage matches the rating label and the wall outlet is earthed. Disconnect the appliance from the mains before: filling the water tank, removing/installing parts, cleaning/maintenance, if the appliance is not working properly, or after use. Empty the water tank if not using for some time. Ensure the appliance has cooled down completely before removing parts or cleaning. Always use cold water. Do not let the cable protrude over edges or contact hot surfaces. Place on a flat, stable surface. Do not use on hot or damp surfaces. Do not use if the drip tray is not properly positioned. Do not use if any part is damaged or the appliance is not working properly. ⚠️ WARNING: this product has undergone quality control. After testing, it is cleaned, but residual water or coffee drops may remain.
Parts and Components
Figure 1: Main Components
- 1. Water tank
- 2. Coffee bean container
- 3. Grinding level knob
- 4. Control panel
- 5. Milk spout
- 6. Coffee spout
- 7. Power switch
- 8. Drip tray
- 9. Coffee residues tank
- 10. Brewing unit
- 11. Side cover of the coffee machine
- 12. Milk tank tube
- 13. Milk tank
Figure 2: Control Panel Indicators
- 1. Temperature indicator light
- 2. Time indicator light
- 3. Size indicator light
- 4. Weight indicator
- 5. Americano coffee icon [americano icon]
- 6. Espresso coffee icon [espresso icon]
- 7. Cappuccino/Latte coffee icon [cappuccino/latte icon]
- 8. Glass of water/milk icon [water/milk icon]
- 9. Double size/Rinse/OK icon [double size icon]
- 10. Menu/Exit icon [menu/exit icon]
- 11. Low coffee in tank indicator light [low coffee icon]
- 12. Double size indicator light [double size icon]
- 13. Open side cover indicator light [open side cover icon]
- 14. Empty water tank indicator light [empty water tank icon]
- 15. Descaling indicator light [descaling icon]
- 16. Blocked press unit indicator light [blocked press unit icon]
- 17. Indicator light for accumulation of dregs in waste container [waste container icon]
Figure 3: Grinding Level Adjustment
- Fine: Fine grind [fine grind icon]
- Coarse: Coarse grind [coarse grind icon]
Figure 4: Dismantling Parts for Cleaning
- 1. Water tank removal: Pull upwards [arrow pointing up].
- 2. Side cover removal: Pull to the side [arrow pointing left/right].
- 3. Brewing unit removal: Press blue arrow [arrow pointing right], pull outwards.
- 4. Drip tray removal: Pull outwards [arrow pointing left/right].
Figure 5: Internal Pipeline Warning
- Indicates a shortage of water in the internal pipe [arrow pointing up].
Before Use
Unpack the appliance, remove all packaging materials. Keep original packaging for future transport. Ensure all parts are present and in good condition. Contact Cecotec support if any parts are missing or damaged.
Box Contents: Cremmaet Compactccino Super-automatic Coffee Machine, Instruction manual, Plastic cleaning brush, Metal cleaning brush, Rubber seals.
Operation
Preliminary Steps:
Place on a flat, stable surface. Clean and fill the water tank. Fill the coffee bean container. Plug in and switch on. Wipe the coffee spout with a damp cloth. Note: Water temperature may be ideal after initial uses.
Brewing Espresso:
Adjust coffee spout height. Place cup. Press [espresso icon].
Brewing Americano:
Adjust coffee spout height. Place cup. Press [americano icon].
Brewing Cappuccino/Latte:
Adjust coffee spout height. Place cup. Press [cappuccino/latte icon] for cappuccino, press and hold for latte.
Brewing Hot Water/Milk:
Adjust coffee spout height. Place cup. Press [water/milk icon] for hot water, press and hold for milk.
Adjusting Grinding Level: Turn the grinding level knob only when the grinder is operating. Adjust based on bean roast. If coffee is too slow, use coarser grind; if too fast/clear, use finer grind.
Important Notes: Adjust grind level after initial uses (100-150 cups). Do not overfill bean container; moisture affects coffee. Use fresh beans. Clean grinder if beans are oily.
Cleaning and Maintenance
Cleaning/Rinse: Adjust spout height. Press rinse button for 3 seconds. Uses ~60ml water.
Dismantling Parts: Water tank (pull up), Side cover (pull side), Brewing unit (press arrow, pull out), Drip tray (pull out).
Daily Maintenance: Important for longevity and coffee taste.
Component Maintenance:
- Brewing unit: Wash by hand every 3 days. Do not lubricate or use dishwasher.
- Drip tray/waste container: Rinse and wipe clean every 2 days.
- Water tank: Rinse every 3 days.
- Coffee bean container/grinder: Clean weekly. Wipe oil/grounds. Use grinder cleaner if oily.
- Ground coffee groove: Clean weekly with a soft cloth.
- Sealing rings: Replace if leaks occur.
- Milk outlet: Clean with provided metal brush.
Descaling: Follow instructions involving descaling product and water, using the [descaling icon] and OK button.
Troubleshooting
| No. | Problem | Possible Cause | Solution |
|---|---|---|---|
| 1 | Control panel displays water tank icon. | 1.1 Water tank is empty. | Fill water tank and insert. |
| 1.2 Necessary to calibrate water level sensor. | In standby: Remove tank, remove sticker from reset button on sensor, press and hold reset for 6s. Unplug, plug in after 10s, insert tank. | ||
| 2 | Display shows dashed lines (Figure 5) and no water dispensed. | 2.1 Water tank not installed correctly. | Install tank securely. |
| 2.2 No water flows through pump. | Open rear panel, inject water into pump. | ||
| 2.3 Internal piping blocked. | Contact Cecotec Support. | ||
| 3 | Display shows dashed lines (Figure 5), EXIT button drains water but warning remains. | 3.1 Water flow meter wires loose or meter broken. | Contact Cecotec Support. |
| 4 | Watery/light coffee. | 4.1 Grinding too fine. | Turn grind level knob to coarser setting. |
| 4.2 After filling with dark/oily beans, grinder blades sticky, coffee not ground. | Increase grind level or contact support. | ||
| 4.3 Residues and wet beans block grinder. | Remove damp beans, clean container, add bean cleaner. | ||
| 5 | No coffee comes out. | 5.1 Water tank not installed correctly. | Install tank securely. |
| 5.2 Filter blocked. | Clean or replace filter. | ||
| 5.3 Internal piping blocked. | Descale machine. If problem persists, contact support. | ||
| 6 | Grinder does not work. | 6.1 Grinder blocked by foreign objects. | Remove foreign objects. |
| 6.2 Grinder cables loose. | Contact Cecotec Support. | ||
| 6.3 Grinder motor broken. | Contact Cecotec Support. | ||
| 7 | Processing unit does not work. | 7.1 Transformer broken. | Contact Cecotec Support. |
| 7.2 Microswitch broken. | Contact Cecotec Support. |
Technical Specifications
Product reference: 01598 / 01478 / 01543 / 01800
Product: Cremmaet Compactccino Super-automatic Coffee Machine Black
Rated Power: 1100 - 1350 W (Coffee)
Voltage: 220-240 V
Frequency: 50/60 Hz
Specifications may change without prior notification. Made in China | Designed in Spain.
Disposal of Old Electrical and Electronic Appliances
Symbol indicates separate disposal of product/batteries from household waste. Take to designated collection point. Contact local authorities for information.
Technical Support and Warranty
Cecotec is liable for non-conformity at delivery. Repairs by qualified personnel recommended. For any problems or doubts, contact Cecotec Official Technical Support at +34 963 210 728.
Copyright
Intellectual property rights belong to CECOTEC INNOVACIONES, S.L. Reproduction or distribution without prior authorization is prohibited.
Cecotec Tienda Oficial | Envío Gratis | Mejor Precio
