EcoSmart Wireless Controlled A21 Smart Bulb

Customer Support

Questions, problems, or missing parts? Before returning to the store, call Hubspace Customer Service:

8 a.m. - 7 p.m., EST, Monday - Friday

9 a.m. - 6 p.m., EST, Saturday

1-877-592-5233

HOMEDEPOT.COM/Hubspace

Safety Information

WARNING: Only use the control provided with or specified by these instructions to control this lamp. This lamp will not operate properly when connected to a standard (incandescent) dimmer or dimming control.

WARNING: Not for use in totally enclosed fixtures.

WARNING: For indoor use only. Do not use where directly exposed to water.

WARNING: This device is not intended for use with emergency exits.

CAUTION: Risk of Shock. Turn off power before inspection, installation, or removal. Do not open. There are no user serviceable parts inside.

Wireless Protocol

The Wi-Fi CERTIFIED™ Logo is a registered trademark of Wi-Fi Alliance®.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by The Home Depot is under license. Other trademarks and trade names are those of their respective owners.

Apple and the Apple logos are trademarks of Apple, Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.

Google, Google Play and the Google Play logo are trademarks of Google LLC.

Wi-Fi CERTIFIED™

Bluetooth®

Warranty

FIVE-YEAR LIMITED WARRANTY

Limited Warranty: Guaranteed to last 5 years based on 3 hours use per day, 7 days per week. If this bulb does not last 5 years after date of purchase (based on 3 hours per day / 7 days per week) due to a defect in materials or workmanship, please bring the defective bulb and a receipt indicating proof of purchase to any Home Depot store. The Home Depot will provide a replacement or, at our discretion, a store credit for the value of the original purchase price.

This warranty will be voided for misuse of product per the caution statement. Some states do not allow the exclusion or limitation of consequential damages, so the above exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights that vary from state to state and province to province. Please see a store for more details.

FCC Regulation

Supplier's Declaration of Conformity

47 CFR § 2.1077 Compliance Information

Responsible Party: Leedarson America, Inc.

300 Technology Court SE Suite 100; Smyrna, GA 30082

Unique Identifier: 13A21150WRGBWH1 (1012 871 610)

Contains FCC ID: 2AB2Q13A21150WRGBWH

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: reorient or relocate the receiving antenna; increase the separation between the equipment and receiver; connect the equipment into an outlet on a circuit different from that to which the receiver is connected; consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body.

Pre-Installation

Package Contents

Bulb Specification

Operation

1. Download the Hubspace™ app from the App Store or the Google Play Store.
   Download on the App Store GET IT ON Google Play
2. Sign in, or tap Register to create a Hubspace account.
3. To add your bulb, tap the '+' button in the upper-right corner.
   (Illustration of phone screen with '+' button and bulb)

NOTE:

• Bluetooth access is required for product setup.
• Each smart Hubspace bulb must be added individually by scanning the QR code or by following the instructions for manual set up.
• Manual instructions can be found in the app or under step 8 of this product manual.
• Scanning the QR code is the fastest method for set up.
• QR code must be scanned from inside the Hubspace app.

4. Scan the QR code printed on either the bulb or Quick Start Guide.
   (Illustration of QR code on bulb and Quick Start Guide)

NOTE:

• QR code must be scanned from inside the Hubspace app.
• If the QR code cannot be scanned, you can enter the code manually. Tap Enter Code and follow the instructions.
• If you are unable to access the QR code, on the Scan Product screen, tap the Search button in the lower-right corner and follow the instructions.
• If you cannot locate the QR code or are having trouble scanning the QR code, please follow instructions for manual set up.
• Manual set up instructions are under step 8 of this product manual.

Operation (continued)

5. Connect your bulb to power and follow the instructions on app screen.

NOTE:

• This Hubspace bulb requires a 2.4GHz Wi-Fi network, which most routers provide.
• The Hubspace app will only show Wi-Fi networks compatible with this bulb.
• If you do not see your Wi-Fi network name when you attempt to connect your bulb, please check your router settings or move your product closer to your Wi-Fi router.

6. Control your lighting using the Hubspace app:
• Control Dimming: choose the brightness you want in the app.
• Change Colors: Select from shades of white or full color spectrum.
• Group Control: group bulbs so they can be controlled at one time.
  
  • Set up groups by tapping the “+” sign on the home screen and select “set up group”. Follow the instructions in the app.
  • Groups can also be set up by setting up rooms. Select “rooms” from the home screen and follow the instructions in the app.
• Create Schedules: program bulbs to turn on and off automatically.
  
  • Select Schedules from the home screen. Follow the steps in the app to create schedules.
7. Set up your Voice Assistant: You can connect your smart bulb to Google Assistant and Alexa from the Hubspace app. Or, you can sign in to Alexa app or Google Assistant and connect to your Hubspace products from there.
8. Manual Set up: If you cannot locate the QR code or are having trouble scanning the QR code, follow below instructions:
   
   • Power on the bulb.
   • Tap the '+' button in the upper right corner on app screen to add your bulb.
   • Tap the Search button in the lower right hand corner and follow the directions in the Hubspace App.

NOTE: QR code must be scanned from inside the Hubspace app.

Troubleshooting Guide

Retain this manual for future use.