EcoSmart Wireless Controlled A19 Smart Bulb

Safety Information

⚠️ WARNING: Only use the control provided with or specified by these instructions to control this lamp. This lamp will not operate properly when connected to a standard (incandescent) dimmer or dimming control.

⚠️ WARNING: Not for use in totally enclosed fixtures. Not for use in recessed fixtures.

⚠️ WARNING: For indoor use only. Do not use where directly exposed to water.

⚠️ WARNING: This device is not intended for use with emergency exits.

? CAUTION: Risk of Shock - Turn off power before inspection, installation, or removal. Do not open. There are no user serviceable parts inside.

Zigbee™

Wireless Protocol: Zigbee 3.0. This device is fully Zigbee 3.0 certified. [Zigbee Certified]

Warranty

THREE-YEAR LIMITED WARRANTY

Limited Warranty: Guaranteed to last 3 years based on 3 hours use per day, 7 days per week. If this bulb does not last 3 years after date of purchase (based on 3 hours per day / 7 days per week) due to a defect in materials or workmanship, please bring the defective bulb and a receipt indicating proof of purchase to any Home Depot store. The Home Depot will provide a replacement or, at our discretion, a store credit for the value of the original purchase price. This warranty will be voided for misuse of product per the caution statement. Some states do not allow the exclusion of limitation or consequential damages, so the above exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights that vary from state to state and province to province. Please see a store for more details.

FCC Regulation

FCC ID: 2AB2QA9A19A60WESDZ2

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: reorient or relocate the receiving antenna; increase the separation between the equipment and receiver; connect the equipment into an outlet on a circuit different from that to which the receiver is connected; consult the dealer or an experienced radio/TV technician for help.

Pre-Installation

Package Contents

Package contents include an A19 LED Bulb (Part A) and a User Guide (Part B).

The bulb is certified to California Title 20 Appliance Database [T20 Certified] and is Energy Star certified [Energy Star Certified].

Bulb Specification

Operation

The following are the general procedures for this smart bulb to be "included" into the network.

1. Screw the bulb into a standard E26 socket.
2. Open Amazon Alexa (if you are using Amazon Echo Plus) or SAMSUNG SmartThings App.
3. Add the smart LED bulb to the hub.
4. Control your lighting:
   • Dimming: The LED bulb will dim to 1% -100% range using the hub app.
   • Color Tuning: Use the hub app to adjust Color Temperature (CCT) of the LED bulb.

Basic Instructions

NOTE: Ensure the hub is powered on and within range of this LED bulb.

• Download or update your hub manufacturer's app.
• Turn on the LED bulb with the wall switch.
• The LED bulb will flash twice when turned ON to indicate that the bulb is in pairing mode.
• Open hub manufacturer's app and follow pairing instructions. See reverse side for specific Amazon Echo Plus, and SmartThings instructions.
• After successful pairing with the hub the LED bulb will flash twice.
• Control the LED bulb through your device (the wall switch must remain ON).
• The LED bulb will be ready to control only after successful pairing to the hub.
• The LED bulb is not designed to work with wall dimmers or other controlled lighting systems.
• Works with Amazon Echo Plus and SmartThings hubs only.
• Refer to hub manufacturing instructions or website for scene setting, scheduling and any other app features.

NOTE: If the bulb will not join the network after repeated attempts, please use the Factory Reset procedures to clear the bulb's settings.

Reset to Factory Setting

• Using the wall switch, physically switch ON and OFF 6 times within 5 seconds.
• The LED bulb will flash twice after a successful reset.

Operation (continued)

App quick start guide and pairing instructions

Works with Amazon Echo Plus

• Open the Amazon Alexa app.
• Select "Add Device".
• Select "Light".
• Scroll down the light brand list to select "other".
• The LED bulb will connect to Alexa by clicking “DISCOVER DEVICES” (ensure the light is on and in a pairing mode).
• Set up the device and the “light bulb” now is ready to use.
• Name and control the bulb.

Works with SmartThings

• Open the SmartThings app.
• Select "Add device".
• Select "Ecosmart".
• Follow the SmartThings app instruction to click “Next” → “Next” → “Next”.
• Scan the QR code on the bulb or click "I don't have a code" to connect the bulb.
• Click "Done", The LED bulb will now connect as “Ecosmart Bulb”.
• Name and control the bulb.

Troubleshooting

Note: Works with Amazon Echo Plus and SmartThings hubs only.