slime Tube Patch Kit Instructions

STEP 1
- Use the scuffer to lightly scuff the area around the puncture.
- The area to be covered by the patch should feel rough to the touch.
STEP 2
- Apply rubber cement onto the roughened surface.
- Gently work the rubber cement into the tube, spreading it evenly and scraping off any excess.
Step 3
- Remove the foil backing from the patch without touching the sticky surface.
Step 4
- Apply the patch (sticky side down) centered over the puncture and press firmly, especially around the edges.
Step 5
- Remove the clear plastic film and wait for the rubber cement to fully dry before reinflating your tube to the recommended pressure.