Uporabniški priročnik za mini tiskalnik TECH F21

TECH F21 Mini Printer

Specifikacije

• Tehnologija tiskanja: Thermal printing (inkless)
• Vrsta tiskanja: Črno-belo
• Vrsta papirja: Zvitki termo papirja
• Širina papirja: 57 mm
• Ločljivost tiskanja: 203 DPI
• Hitrost tiskanja: Approx. 10–15 mm/s
• Povezljivost: Bluetooth
• Združljive naprave: Android, iOS
• Podprte aplikacije: Dedicated mobile printing app (varies by region)
• Vrsta baterije: Polnilna litijeva baterija
• Kapaciteta baterije: ~1000 mAh
• Način polnjenja: USB (Type-C or Micro-USB, model dependent)
• Delovna zvezatage: 5V
• Material: ABS plastika
• Velikost: Compact / portable
• Teža: Lightweight (approx. 150–200 g)
• Supported Printing: Text, images, labels, QR codes, barcodes

Odpravljanje težav

Tiskalnik se ne vklopi

• Prepričajte se, da je baterija napolnjena.
• Poskusite z drugim kablom USB ali virom napajanja.
• Press and hold the power button for 3–5 seconds.

Bluetooth se ne povezuje

• Turn Bluetooth OFF and ON again on your phone.
• Ensure the printer is not connected to another device.
• Reinstall or update the printer app.
• Keep the printer within 1–2 meters during pairing.

Blank or unclear printing

• Check that thermal paper is loaded correctly (print side facing out).
• Use compatible thermal paper only.
• Clean the print head gently.
• Ensure battery level is sufficient.

Paper not feeding properly

• Reinstall the paper roll correctly.
• Avoid overloading the paper compartment.
• Remove jammed paper carefully.

Aplikacija se ne odziva

• Zaprite in znova odprite aplikacijo.
• Check app permissions (Bluetooth, storage).
• Ponovno zaženite telefon.

Nega in vzdrževanje

• Uporaba only recommended thermal paper to avoid print head damage.
• Keep the printer dry and away from heat or direct sunlight.
• Clean the print head periodically with a soft, dry cloth.
• Do not pull paper forcefully while printing.
• Charge the battery at least once every 2–3 months if not in use.
• Avoid dropping or applying pressure to the device.
• Ko naprave ne uporabljate, jo shranjujte v okolju brez prahu.

Loading PDF…

−+Fit width100%View FullscreenDownload PDFPrint PDF

×

Loading PDF…

Predstavitev izdelka

1.1 Pakirni seznam

O The quantity and specifications of the paper roll(s) are tailored to the package you’ve chosen.

1.2 Navodila za dele tiskalnika

Kako začeti

2.1 Prenos aplikacije
Iskanje the “FaithTag” app on App Store@ or Google PlayTM for download and installation.

2.2 Navodila za uporabo
O Before starting printing, please ensure that the paper roll is properly loaded into the paper compartment. For detailed instructions, refer to the manual section “3. Replacing the Paper Roll.”

Če želite vklopiti tiskalnik, za tri sekunde dolgo pritisnite gumb za vklop, dokler ne zasveti indikatorska lučka.
Open the “FaithTag"Aplikacija
Podeli dovoljenja.
Kliknite [Poveži] na vrhu.
Connection complete. Tap the homepage to view scriptures.
View scripture details, then tap print.
Access preview, then tap [Print].
Tiskanje je končano.
Odtrgajte nalepko vzdolž izhoda za papir.
Odstranite podlago.
Nalepko nalepite na suho, ravno površino.

Programski vmesnik je samo za referenco. Za točne informacije glejte dejansko stran o delovanju.

Zamenjava zvitka papirja

Vzemite čisto nov zvitek papirja.
O Please skip this step if the paper roll you have is not newly purchased and boxed.
Push the Cover Open Button towards the arrow to take out the Paper RollSpindle.
Povlecite premični damper to remove the paper roll to be replaced.
Some paper rolls include tubes. Remove the paper tube after running out.
Vstavite en del vretena v zvitek papirja, ki ga želite namestiti.
Ponovno namestite premični Dampin ga potisnite do roba papirnatega zvitka.
Odstranite nalepko proti zrahljanju z zvitka papirja.
Papirni zvitek položite v predal za papir.
Izvlecite zvitek papirja, dokler ne sega čez režo za izhod papirja, nato pa zaprite pokrov.

Varnostna navodila

5.1 Navodila za ročni rezalnik in tiskalno glavo

Warning: Sharp edges on Manual Cutter! Do not touch the edges.
Warning: HOT component! Touching it when it is hot can cause burns to your fingers. Please wait for at least 30 minutes after turning off the power before touching it.

5.2 Navodila za polnjenje
1. Please prepare your own power adapter (DC 5V/2A) with a Type-A port.
2. Insert the Type-C end (flat end) of the USB cable into F21’s Type-C Charger Port and plug the Type-A end (wide end) into the Type-A port of the power adapter.
3. After connecting and plugging in, please check the status of the printer indicator light. When the printer is charging, the indicator light will be flashing slowly with a “white light”.
4. Please charge for at least 20 minutes to meet quick usage; charging for 2-3 hours will complete the charging, or the following two states indicate full charge:when turned on, the indicator light stays “white”; when turned off, the light goes out.
5. As the printer may heat up during charging, avoid placing it on materials such as cotton or linen.
6. Once the battery is fully charged, please unplug the charger promptly.
O Avoid using the printer while charging.Using the printer while charging may lead to reduced charging speed, compromised print quality, and shortened battery life.

5.3 Čiščenje in vzdrževanje
O Please make sure the printer is turned off before performing any cleaning or maintenance.
Če naletite na težave, kot so prazne vrstice, zamegljen tisk ali manjkajoči znaki, je to lahko posledica umazanije na tiskalni glavi. Sledite tem korakom:
If you have just finished printing, wait for at least 30 minutes for the Print

01 Head to cool down completely. Use a cotton swab dipped in alcohol or a print head cleaning pen (purchased
02 separately) to gently wipe the surface of the Print Head about 5 times to remove any dust and stains. Wait 5-10 minutes for the alcohol to evaporate completely. Thus, the cleaning
03 is done, and you can continue using the printer.

Informacije za uporabnika

6.1 OPOZORILO FCC
Ta naprava je skladna s 15. delom pravil FCC.

Operation is subject to the ollowing two conditions:

(1) ta naprava ne sme povzročati škodljivih motenj in
(2) ta naprava mora sprejeti vse prejete motnje, vključno z motnjami, ki lahko povzročijo neželeno delovanje.

Vse spremembe ali modifikacije, ki jih stranka, odgovorna za skladnost, ni izrecno odobrila, lahko razveljavijo uporabnikovo pooblastilo za uporabo opreme.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely tocause harmful interference in which case the user will be required to correct the interference at his own expense.

Naprava je bila ocenjena, da ustreza splošni izjavi o izpostavljenosti RF.
Napravo je mogoče uporabljati v prenosnem stanju izpostavljenosti brez omejitev.

6.2 OBVESTILO ISED (Kanada)
– angleščina:
This device contains licence-exempt that comply with Innovation, Science and Economic Development Canada’ s licence-exempt RSS(s).

Delovanje je odvisno od naslednjih dveh pogojev:

(1) Ta naprava ne sme povzročati motenj.
(2) Ta naprava mora sprejeti vse motnje, vključno z motnjami, ki lahko povzročijo neželeno delovanje naprave.

Izjava o izpostavljenosti IC RF:
Ocenjeno je bilo, da naprava izpolnjuje splošne zahteve IC za izpostavljenost RF. Napravo je mogoče uporabljati v prenosnem stanju izpostavljenosti brez omejitev.

WARNING Please pay attention to electrical safety. Do not disassemble, crush or puncture the battery. This product is not a toy.

Posebne opombe
Podjetje prevzema polno odgovornost za revizijo in razlago tega priročnika ter si z največjo skrbnostjo prizadeva za njegovo točnost.
Nevertheless, please note that any technical improvements to the product may not be separately notified, and that the images of the product, accessories, software interfaces, etc. in this manual serve solely as illustrations and references. Due to product updates and upgrades, theactual product may vary slightly from the images. Please refer to the physical product for accurate representations.