Elecrow ESP32 AI Camera Development Board Vision Sensor Board

Deli naprave

1. Glava zvočnika
2. RGB svetloba
3. Al Button
4. MIC
5. Glava UART
6. Reža za kartico TF
7. Kamera
8. Pomožna svetloba
9. Gumb za ponastavitev
10. Zvočnik
11. Vrata Type-C
12. Luč za napajanje
13. Lučka za baterijo
14. BAT Header

Kratek vodnik

• Al Button:
  • In “Al Voice” mode, click to toggle the “Standby/Listening” status.
• Ključ za ponastavitev:
  • Single-click to reboot after firmware flashing failure or device malfunction.
• Lučka moči:
  • The red LED is on steadily when powered.
• Lučka baterije:
  • When powered by the battery, the red light stays on while charging, and the green light stays on when fully charged.

Omrežno seznanjanje

1. Plug in the Type-C cable to power on.
2. If you want to use the “Al Online” feature, you need to network pair and register the Al Agent first.
3. Open your phone/computer’s WiFi list, click on “Al_Camera_XXXX” to enter WiFi pairing mode.
   • Če je webpage does not open automatically, please visit 192.168.4.1 in your browser.
4. Choose an available 2.4GHz WiFi, enter the WiFi password, and click “Save Configuration”.
   • You can see your Wifi in “WiFi Network”.
   • Opomba: If you want to clear your network, open the “Settings” app, then open the “Configure Network”, and click “RECONFIGURE”.
5. Open the “Al Online” app, then open a browser and go to https://portal.thinknode.cc/ to access the Al Hub interface. If this is your first time logging in, you need to click the “Create Account” button to create an account.
6. After the account is successfully created and logged in, you will receive a 5000-point reward.
7. Click the “Al Hub” button to start “Add Agent”.
8. Click “Add Agent” and give your Al Agent a name.
9. Click “Manage devices (0)”, then click “Add Device”, enter the verification code, and confirm.
10. After completing “Add Device”, you can configure the character.
11. If you want to browse “Historical conversations”, you need to first enable “Local Short-term Memory” and save.
    • Opomba: If your 5000 points are used up, you need to click “Recharge” to purchase a plan that will allow you to regain points.

Glavne specifikacije

• Ime izdelka: Al Camera Module
• Glavni krmilnik ESP32-S3R8
• Zaslon 1.83-palčni TFT-LCD zaslon na dotik
• Piksli 2 MP
• Brezžično WiFi & Bluetooth 5.0
• Flash 16 MB
• Reža za kartico TF Podpira do 128 GB
• Vmesnik UART Interface. IC Pad
• Vnos 5V/1A
• Dimenzije 56.05*44.5*18.6 mm
• Delovna temperatura -20°C do 65°C

Dokumenti / Viri

Elecrow ESP32 AI Camera Development Board Vision Sensor Board [pdf] Uporabniški priročnik ESP32 AI Camera Development Board Vision Sensor Board, ESP32, AI Camera Development Board Vision Sensor Board, AI Camera Development Board Vision Sensor Board, AI Camera Development Board, Camera Development Board, Vision Sensor Board, Sensor Board

Reference

• Uporabniški priročnik