DCOLOR manufactures affordable home entertainment and audio solutions, including Google TV sticks, digital converter boxes, wireless video transmitters, and lavalier microphones.
DCOLOR is a consumer electronics brand dedicated to enhancing home entertainment and digital connectivity. The company specializes in streaming devices such as 4K Google TV sticks and Android TV boxes that upgrade standard televisions with smart capabilities.
In addition to streaming solutions, DCOLOR produces digital terrestrial (ATSC/DVB-T2) and satellite receivers, enabling users to access free over-the-air broadcasts with ease. The brand also caters to content creators with a range of audio-visual accessories, including wireless lavalier microphones for smartphones and digital voice recorders. DCOLOR products are designed for plug-and-play simplicity, offering cost-effective ways to modernize home media setups.
Najnovejši priročniki od manuals+ izbrano za to blagovno znamko.
Oglejte si videoposnetke o nastavitvi, namestitvi in odpravljanju težav za to blagovno znamko.
Pogosta vprašanja o priročnikih, registraciji in podpori za to blagovno znamko.
Ensure batteries are fresh. For many models like the GD1/GD2, press and hold the specific pairing key combination (often HOME + BACK) for about 10 seconds until the indicator light flashes rapidly. If it fails, use the 'Reset' button on the device to enter pairing mode again.
First, ensure your antenna is firmly connected to the 'RF IN' or 'ANT IN' port. In the device menu, select 'Channel Search' and ensure 'Antenna Power' is turned on if you are using an active antenna. Signal strength depends heavily on antenna placement, so try moving the antenna closer to a window.
Plug the receiver into your phone's charging port (Lightning or USB-C). A green light on the receiver indicates a successful connection. If the light does not turn green on Android devices, check your settings to ensure 'OTG' connection is enabled.
Check the HDMI connection to your TV and ensure the television volume is not muted. If using a wireless transmitter set, ensure the audio output source on your computer is set to the DCOLOR device.
Disconnect the power cable. Use a pin to press and hold the reset button (usually inside the AV or dedicated hole) while plugging the power back in. Keep holding the button for about 6-10 seconds until the recovery menu appears.