1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of the Shelly Wave 2PM US LR UL Z-Wave Long Range Smart Switch Relay. This device is a 2-channel smart relay designed for home automation, offering power metering capabilities and Z-Wave Long Range communication. It is UL certified for safety and quality assurance.

2. Varnostne informacije

Pomembni varnostni ukrepi:

• Installation should only be performed by a qualified electrician or person with appropriate electrical knowledge.
• Always disconnect power to the circuit at the main breaker before performing any installation or maintenance.
• Ensure the device is installed in compliance with all local and national electrical codes.
• Do not exceed the maximum load specified for the device (14 A per channel, 16 A total).
• The device is designed for AC 120 V power supply.
• Napravo hranite stran od vlage in ekstremnih temperatur.
• Ta naprava je samo za uporabo v zaprtih prostorih.

3. Izdelek je končanview

The Shelly Wave 2PM US LR UL is a compact Z-Wave smart relay that allows you to control two independent electrical circuits and monitor their power consumption. Its small size enables installation within standard electrical boxes or behind existing switches.

Image 3.1: Shelly Wave 2PM US LR UL Smart Switch Relay and its retail packaging.

3.1 Mere naprave

Image 3.2: The Shelly Wave 2PM US LR UL device held in a hand, illustrating its compact dimensions of 42mm (1.65 inches) in width and 37mm (1.45 inches) in height.

The device measures approximately 42mm (1.65 inches) in width and 37mm (1.45 inches) in height, making it suitable for installation in confined spaces.

3.2 Opisi terminalov

• N: Neutral input.
• L: Live input.
• O1: Output 1 for controlled appliance/light.
• O2: Output 2 for controlled appliance/light.
• SW1: Switch input 1 for manual control of O1.
• SW2: Switch input 2 for manual control of O2.

4. Nastavitev in namestitev

4.1 Kontrolni seznam pred namestitvijo

• Ensure you have a compatible Z-Wave gateway (hub) for device pairing and control.
• Verify that the electrical circuit is rated for the device's specifications.
• Gather necessary tools: screwdriver, wire strippers, voltage tester.

4.2 Navodila za ožičenje

WARNING: Disconnect power at the circuit breaker before proceeding.

1. Povežite Nevtralno (N) wire from your electrical supply to the 'N' terminal on the Shelly Wave 2PM.
2. Povežite V živo (L) wire from your electrical supply to the 'L' terminal on the Shelly Wave 2PM.
3. Connect the load (e.g., light fixture, appliance) for the first channel to the Izhod 1 (O1) terminal. The other side of the load should be connected to Neutral.
4. Connect the load for the second channel to the Izhod 2 (O2) terminal. The other side of the load should be connected to Neutral.
5. If using external switches for manual control, connect the switch wires to SW1 in SW2 terminals. These switches should be connected to the Live (L) line.

4.3 Fizična namestitev

Image 4.1: A hand installing the compact Shelly Wave 2PM US LR UL device into a standard electrical wall box behind a switch, demonstrating its ease of fit.

The Shelly Wave 2PM is designed to fit into most standard electrical boxes and behind wall switches. After wiring, carefully place the device into the electrical box, ensuring no wires are pinched. Secure the cover plate.

4.4 Vključitev v omrežje Z-Wave

Once the device is physically installed and power is restored, you can include it into your Z-Wave network:

1. Put your Z-Wave gateway into inclusion mode (refer to your gateway's manual for specific instructions).
2. Triple-click the button connected to SW1 or SW2, or cycle the power to the device three times within 5 seconds.
3. The device should now be detected and added to your Z-Wave network. Confirm successful inclusion via your gateway's interface.

5. Navodila za uporabo

5.1 Osnovni nadzor

The Shelly Wave 2PM allows control of connected appliances or lights through multiple methods:

• Ročno stikalo: Use the physical wall switches connected to SW1 and SW2.
• Z-Wave Gateway/App: Control the device remotely via your Z-Wave gateway's mobile application or web vmesnik.
• Automation Systems: Integrate with various home automation platforms for advanced control and scene creation.
• Glasovni nadzor: If your Z-Wave gateway supports it, you can use voice assistants (e.g., Alexa, Google Home) to control the device.

Image 5.1: Illustration of a bedroom setting where two distinct lights are controlled by a single Shelly Wave 2PM device, highlighting its dual-channel capability.

5.2 Merjenje moči

The Shelly Wave 2PM provides real-time power consumption data for each channel independently and combined. This data can be accessed through your Z-Wave gateway's interface, allowing you to monitor energy usage and identify opportunities for savings.

Image 5.2: A visual representation of the Shelly Wave 2PM monitoring energy consumption within a smart home environment, demonstrating its ability to track usage and potentially reduce utility costs.

5.3 Smart Schedules and Automation

Leverage your Z-Wave gateway to create personalized schedules and automation rules for the Shelly Wave 2PM. This allows for automatic control of lights and appliances based on time, sensor input, or other conditions, enhancing convenience and energy efficiency.

Image 5.3: A smartphone screen displaying various smart home controls and schedules, indicating how users can manage lighting and other devices with Shelly products.

6. Vzdrževanje

The Shelly Wave 2PM US LR UL is designed for maintenance-free operation. However, consider the following:

• Čiščenje: If necessary, gently wipe the device with a dry, soft cloth. Do not use liquid cleaners or solvents.
• Posodobitve vdelane programske opreme: Periodically check your Z-Wave gateway's interface or Shelly's official support channels for available firmware updates to ensure optimal performance and security.
• Električni pregled: For safety, it is recommended to have electrical installations periodically inspected by a qualified professional.

7. Odpravljanje težav

If you encounter issues with your Shelly Wave 2PM, refer to the following common problems and solutions:

7.1 Ponastavitev na tovarniške nastavitve

To perform a factory reset, press and hold the button connected to SW1 or SW2 for 10 seconds. The device will reset to its factory default settings and be removed from the Z-Wave network.

8. Specifikacije

9. Garancija in podpora

9.1 Informacije o garanciji

Shelly ponuja 3-letna garancija na napravo for the Shelly Wave 2PM US LR UL. Please retain your proof of purchase for warranty claims.

9.2 Podpora strankam

For technical assistance, product information, or troubleshooting not covered in this manual, please utilize the following resources:

• Shelly Customer Service: Obrnite se na Shellyjino profesionalno podporno ekipo.
• Baza znanja: Access detailed product specifications and guidelines online.
• Technical Support & Community: Join Facebook Support Groups and Reddit communities for peer and expert assistance.
• Akademija Shelly: Raziščite video vadnice in webinars for further guidance.

Image 9.1: A graphic detailing Shelly's support options, including a QR code for direct access to their support portal. Resources include a knowledge base, technical support, Facebook groups, Reddit community, and Shelly Academy.

For direct access to support, visit: https://support.shelly.cloud/en/support/home