Uporabniški priročnik za Ohlinsov sistem vzmetenja Coilover

1. Uvod

This manual provides essential information for the installation, operation, and maintenance of your Ohlins Road & Track Coilover Suspension System. This system is designed for specific Subaru models, including the 2008-2021 Subaru WRX STi (GR/VA) and 2015-2020 Subaru WRX (VA). Please read this manual thoroughly before attempting any installation or adjustments to ensure proper function and safety.

2. Varnostne informacije

WARNING: Professional installation is highly recommended. Improper installation or adjustment can lead to vehicle damage, loss of control, and serious injury or death.

• Pri delu na vozilu vedno nosite ustrezno osebno zaščitno opremo (OZO), vključno z zaščitnimi očali in rokavicami.
• Pred začetkom kakršnih koli del se prepričajte, da je vozilo varno podprto z dvižnimi stojali ali dvigalom. Nikoli se ne zanašajte samo na dvigalko.
• Za specifične specifikacije navora in postopke glejte servisni priročnik vašega vozila.
• Roke in oblačila ne približujte gibljivim delom.
• Ta izdelek vsebuje kemikalije, za katere zvezna država Kalifornija ve, da povzročajo raka in prirojene okvare ali druge reproduktivne poškodbe. Po rokovanju si umijte roke.

3. Vsebina paketa

Verify that all components listed below are present and undamaged before proceeding with installation. If any parts are missing or damaged, contact your Ohlins dealer immediately.

• Sprednji sklopi amortizerjev (2)
• Zadnji sklopi amortizerjev (2)
• Adjustment Tools (Spanner Wrenches, Hex Keys)
• Navodila za uporabo (ta dokument)

This image displays the full set of four Ohlins coilover units. The two front units are on the left, featuring a longer body and spring, while the two rear units on the right are shorter and include a distinct lower mounting bracket. All units are characterized by their signature yellow springs and silver/gold anodized bodies.

4. Vodič za namestitev

This section outlines the general steps for installing the Ohlins Coilover Suspension System. It is crucial to consult a professional mechanic or refer to a detailed vehicle-specific service manual for precise instructions and torque specifications.

1. Priprava: Park the vehicle on a level surface. Engage the parking brake and block the wheels. Loosen the lug nuts on the wheels to be removed.
2. Vehicle Lift: Safely lift the vehicle using a hydraulic lift or jack stands, ensuring it is stable and secure. Remove the wheels.
3. Remove OEM Suspension: Carefully unbolt and remove the original shock absorbers and springs from the vehicle. This typically involves disconnecting brake lines, ABS sensors, and sway bar links.
4. Install Ohlins Coilovers: Mount the new Ohlins coilover assemblies into the vehicle's suspension points. Ensure all bolts are hand-tightened initially.
5. Začetne prilagoditve: Before fully tightening, set the initial ride height and damping settings as recommended in the Ohlins setup guide (often provided separately or online).
6. Zategnite pritrdilne elemente: Torque all mounting bolts to the vehicle manufacturer's specifications. Reconnect any disconnected lines or sensors.
7. Reinstall Wheels: Mount the wheels and hand-tighten the lug nuts.
8. Spodnje vozilo: Carefully lower the vehicle to the ground. Torque the lug nuts to the manufacturer's specifications.
9. Poravnava: After installation, a professional wheel alignment is mandatory to ensure proper handling and tire wear.

This image shows a detailed side view of one of the front Ohlins coilover units. Key features visible include the yellow main spring, the black bump stop, the threaded body for ride height adjustment, and the lower spherical bearing mount.

Ta slika ponuja stranski pogled view of a rear Ohlins coilover unit. It highlights the compact design, the yellow spring, and the distinct silver lower mounting bracket, which differs from the front unit's spherical bearing mount.

5. Delovanje in nastavitev

The Ohlins Road & Track Coilover System allows for precise adjustment of ride height and damping to fine-tune your vehicle's performance and comfort.

5.1. Nastavitev višine vožnje

Ride height is adjusted by rotating the lower spring perch on the threaded shock body. Use the provided spanner wrenches. Ensure both sides of an axle are adjusted equally to maintain balance.

• Za nižje the vehicle, turn the spring perch navzdol.
• Za dvigniti the vehicle, turn the spring perch up.
• Always adjust ride height with the vehicle's weight off the suspension.

5.2. Damping Adjustment (DFV Technology)

The Ohlins Road & Track coilovers feature Dual Flow Valve (DFV) technology, allowing for simultaneous adjustment of compression and rebound damping with a single click. The damping adjuster is typically located at the top of the shock shaft or at the bottom of the shock body.

• Obrnite regulator v smeri urinega kazalca za čvrstejši damping.
• Obrnite regulator v nasprotni smeri urnega kazalca za mehkejša damping.
• Refer to the Ohlins setup guide for recommended starting points and click settings for various driving conditions.

This close-up image shows the top mounting plate of an Ohlins coilover. The gold-colored knob in the center is the damping adjuster, which allows for precise control over the suspension's firmness. The mounting studs and camber adjustment slots are also visible.

Ta slika ponuja podroben view of the lower section of an Ohlins coilover. The threaded body and the adjustable spring perch are clearly visible, which are used to set the vehicle's ride height. The yellow main spring and black bump stop are also prominent.

6. Vzdrževanje

Regular maintenance will prolong the life and performance of your Ohlins coilover system.

• Redno čiščenje: Keep the coilovers clean, especially the threaded sections and shaft, to prevent dirt and debris from causing wear. Use mild soap and water.
• Pregled: Periodically inspect the coilovers for any signs of leaks, damage, or loose components. Check rubber boots for tears.
• Preverjanje navora: After initial installation and periodically thereafter, check the torque of all mounting bolts to ensure they remain secure.
• Bearing Lubrication: If your coilovers feature spherical bearings (e.g., in top mounts or lower mounts), ensure they are clean and lubricated according to Ohlins recommendations.
• Strokovna storitev: Ohlins coilovers are rebuildable. If you notice a significant change in performance or suspect internal damage, contact an authorized Ohlins service center for professional inspection and service.

7. Odpravljanje težav

This section addresses common issues you might encounter with your coilover system.

8. Specifikacije

Key specifications for the Ohlins Road & Track Coilover System (Model: SUS MI10S1).

9. Garancija in podpora

For detailed warranty information, please refer to the official Ohlins website or the warranty card included with your product. Ohlins products are manufactured to high standards and are typically covered by a limited warranty against defects in materials and workmanship.

For technical support, service, or warranty claims, please contact your authorized Ohlins dealer or visit the official Ohlins website for contact information and service center locations.

Ohlins Official Webspletno mesto: www.ohlins.com