Navodila za uporabo senzorjev tlaka v pnevmatikah MAX MXSA001 315MHz TPMS za Toyoto

1. Uvod

This instruction manual provides essential information for the proper installation, operation, and maintenance of your MAX MXSA001 315MHz Tire Pressure Monitoring System (TPMS) sensors. These sensors are designed as direct replacements for various Toyota models, ensuring accurate tire pressure monitoring for enhanced safety and vehicle performance. Please read this manual thoroughly before installation and retain it for future reference.

2. Varnostne informacije

Priporočena profesionalna namestitev: Installation of TPMS sensors requires specialized tools and knowledge. It is highly recommended that these sensors be installed by a qualified technician.
Pravilen navor: Ensure valve stem nuts are tightened to the specified torque (4 Nm or 35 in-lbs) to prevent air leaks and sensor damage.
Montaža pnevmatik: Exercise caution during tire mounting and demounting to avoid damaging the sensor.
Združljivost: Verify that the sensors are compatible with your vehicle's make, model, and year before installation. Refer to the replacement OEM part numbers provided.
Življenjska doba baterije: TPMS sensors contain non-replaceable batteries. The typical lifespan is 5-7 years, depending on usage.

3. Vsebina paketa

Vsak paket vsebuje:

4 x MAX MXSA001 315MHz TPMS Sensors
4 x Silver Aluminum Valve Stems (pre-attached to sensors)

Four MAX MXSA001 TPMS sensors with silver aluminum valve stems, arranged on a white background.

Slika 3.1: Konecview of four MAX MXSA001 TPMS sensors.

4. Nastavitev in namestitev

Proper installation is crucial for the correct functioning of the TPMS. It is strongly recommended that installation be performed by a certified automotive technician.

4.1 Preverjanje pred namestitvijo

Confirm that the MXSA001 sensors are the correct replacement for your vehicle's OEM part numbers (e.g., 4260733021, 4260706011, 4260733011, 426070C020, 426070C010, 42607AD020, 4260704010).
Inspect each sensor for any visible damage before installation.

4.2 Sensor Mounting

Odstranite pnevmatiko s kolesa.
Carefully remove the old TPMS sensor and valve stem.
Insert the new MAX MXSA001 sensor's valve stem through the valve hole from the inside of the rim.
Secure the valve stem nut from the outside, tightening it to 4 Nm (35 in-lbs). Ne zategnite preveč.
Ensure the sensor body is properly seated and does not interfere with the tire bead during mounting.
Mount the tire back onto the wheel, taking care not to damage the sensor.
Inflate the tire to the manufacturer's recommended pressure.

Od blizu view of a single MAX MXSA001 TPMS sensor, showing the black sensor body, silver valve stem, and printed specifications like 'Max.9Bar/130Psi' and '4Nm'.

Figure 4.2.1: Close-up of a single MXSA001 sensor.

Stran view of a MAX MXSA001 TPMS sensor, highlighting the angle of the valve stem attachment to the sensor body.

Slika 4.2.2: stran view of the sensor and valve stem.

4.3 TPMS Relearn Procedure

After installing new TPMS sensors, your vehicle's TPMS control module must be reprogrammed or

Povezani dokumenti - MXSA001

	Navodila za namestitev in garancijske informacije za senzor TPMS MAX (GEN 5) Podrobna navodila za namestitev senzorjev TPMS MAX Sensor (modela MX005A GEN 5, MX005R GEN 5), vključno s podrobnostmi o programiranju, montaži, polnjenju in garanciji. Skladno s FCC.
	Uporabniški priročnik za diagnostično orodje MAX SENSOR MX-51 TPMS in novejše različiceview Celovit vodnik za MAX SENSOR MX-51, diagnostično orodje TPMS za testiranje, programiranje in ponovno učenje sistemov za nadzor tlaka v pnevmatikah. Vključuje nastavitev, delovanje in odpravljanje težav.
	Navodila za namestitev in garancijo senzorja TPMS MAX Sensor MXBLE02 Celovit vodnik za namestitev senzorja TPMS MAX Sensor MXBLE02, vključno s pomembnimi varnostnimi ukrepi, informacijami o garanciji in podrobnostmi o skladnosti s predpisi FCC.
	Vodnik za namestitev in garancijo senzorja TPMS MAX Ta priročnik vsebuje navodila za namestitev enot MAX Sensor TPMS (modela MX005A, MX005R GEN 5A), vključno z identifikacijo komponent, postopno namestitvijo, podrobnostmi o garanciji in informacijami o skladnosti s predpisi FCC.
	Auto Injector User Manual - YZHIDIANF Technical Support and Warranty Information Official user manual for the YZHIDIANF Auto Injector, providing details on technical support services, warranty information, and contact details. Includes benefits like 2-year warranty, free replacement, and welfare plans.
	TST 507 Series Wireless TPMS Installation Manual Installation guide for the TST 507 Series Wireless Tire Pressure and Temperature Monitoring System (TPMS). Covers setup, sensor programming, display configuration, alerts, troubleshooting, and specifications for vehicles and trailers.

Max Sensor MXSA001