1. Izdelek je končanview
The Flex LBE 17-11 125 is a powerful and high-quality angle grinder designed for cutting, deburring, and grinding tasks. It incorporates advanced features for enhanced performance, safety, and durability.
- Microprocessor Electronics: Features soft start, restart interlock after power failure, overload protection, and constant electronics (CDC) for consistent performance.
- Mechanical Brake: Ensures the tool stops quickly, within 3.5 seconds, for increased safety.
- Anti-Kickback Function: Automatically switches off the motor if the disc jams, preventing dangerous kickback.
- Visokozmogljiv motor: Designed for high load capacity and efficiency, delivering strong power output.
- Optimized Durability: Efficient air ducting and optimized carbon geometry contribute to a long service life.
- Dust Sealing: Sophisticated dust sealing protects the motor and gearbox from abrasive dust.
- Ergonomska oblika: Compact and ergonomic form for comfortable handling.
- Tool-Free Guard Adjustment: The protective guard can be adjusted without the need for additional tools.
- SoftVib Handle: Features an integrated patented clamping nut wrench and vibration damping for reduced fatigue.
2. Varnostna navodila
Always observe general power tool safety warnings and specific instructions for angle grinders. Failure to follow these warnings and instructions may result in electric shock, fire, and/or serious injury.
Splošna varnost
- Vedno nosite ustrezno osebno zaščitno opremo (OZO), vključno z zaščitnimi očali, zaščito za sluh, rokavicami in masko za prah.
- Prepričajte se, da je obdelovanec varno clamppred operacijo.
- Keep hands clear of rotating parts and the cutting/grinding area.
- Orodja ne uporabljajte v eksplozivnem okolju, na primer v prisotnosti vnetljivih tekočin, plinov ali prahu.
- Med uporabo električnega orodja naj se otroci in navzoče osebe ne približujejo.
Električna varnost
- Prepričajte se, da je napajalnik voltage se ujema z nazivno vrednostjo na napisni ploščici orodja.
- Ne zlorabljajte kabla. Nikoli ne uporabljajte kabla za prenašanje, vlečenje ali izklapljanje električnega orodja. Kabel hranite stran od vročine, olja, ostrih robov ali gibljivih delov.
- Če uporabljate električno orodje v oglasuamp lokaciji neizogibna, uporabite napajanje, zaščiteno z napravo za diferenčni tok (RCD).
Specific Angle Grinder Safety
- Always use the protective guard. Ensure it is correctly positioned and securely fastened.
- Use only discs that are rated for the maximum speed of the grinder and are suitable for the material being worked on.
- Never use cutting discs for side grinding.
- Be aware of the anti-kickback feature; if the disc jams, the motor will shut off. Release the switch and clear the obstruction before restarting.
- Allow the disc to come to a complete stop using the mechanical brake before setting the tool down.
3. Komponente in funkcije
Ključne komponente:
- Glavni del: Houses the motor, electronics, and gearbox.
- Zaščitno varovalo: Adjustable, tool-free guard for user protection.
- SoftVib Handle: Ergonomic side handle with vibration damping and integrated wrench.
- Gumb za zaklepanje vretena: For easy disc changes.
- Drsno stikalo: Lockable for continuous operation.
- Speed Selection Dial: For variable speed control (see Figure 2).
- Zračne reže: For motor cooling and dust expulsion.
4. Nastavitev
Attaching the SoftVib Handle
The SoftVib handle can be screwed into either the left or right side of the gearbox housing, depending on user preference and application. Ensure it is tightened securely.
Mounting the Protective Guard
The protective guard is tool-free adjustable. Position it to provide maximum protection for your specific task. Ensure it clicks securely into place.
Installing the Grinding/Cutting Disc
- Izključite orodje iz električnega omrežja.
- Pritisnite in držite gumb za zaklepanje vretena.
- Postavite notranji clampprirobnico na vreteno.
- Place the desired 125mm disc onto the inner flange, ensuring it sits flush.
- Privijte klamping nut (M14) and tighten it firmly using the integrated wrench in the SoftVib handle.
- Sprostite gumb za zaklepanje vretena.
5. Navodila za uporabo
Vklop/izklop
- To switch on, push the slide switch forward. For continuous operation, push it further forward until it locks into place.
- To switch off, release the slide switch. If locked, press the rear part of the switch to release it.
Nadzor spremenljive hitrosti
The speed selection dial (Figure 2) allows you to adjust the no-load speed between 2800 and 11500 rpm. Select the appropriate speed for the material and application. Lower speeds are generally used for polishing or working with sensitive materials, while higher speeds are for cutting and grinding.
Using the Mechanical Brake
The integrated mechanical brake stops the disc within 3.5 seconds after the tool is switched off. This enhances safety by quickly stopping rotation.
Working with the Grinder
- Brusilnik vedno trdno držite z obema rokama.
- Allow the tool to reach full operating speed before contacting the workpiece.
- Apply steady, even pressure. Do not force the tool, as this can lead to overheating or disc damage.
- For cutting, use a slight rocking motion to prevent the disc from binding.
- Be mindful of sparks and debris. Direct them away from yourself and others.
6. Vzdrževanje
Regular maintenance ensures the longevity and safe operation of your Flex angle grinder.
Čiščenje
- Pred čiščenjem vedno odklopite orodje.
- Regularly clean the ventilation slots to prevent dust buildup, which can lead to overheating. Use compressed air if available.
- Zunanjost orodja obrišite z oglasnimamp krpo. Ne uporabljajte močnih kemikalij ali abrazivnih čistil.
Karbonske ščetke
The optimized carbon geometry contributes to long brush life. If the tool's performance significantly drops or sparks excessively, the carbon brushes may need inspection or replacement. This should ideally be done by a qualified service technician.
Shranjevanje
Store the angle grinder in a dry, secure place, out of reach of children and unauthorized users.
7. Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Orodje se ne zažene | Brez napajanja Restart interlock activated (after power failure) Poškodovan napajalni kabel | Preverite napajalni priključek Unplug and re-plug the tool Inspect cord for damage; replace if necessary (by qualified personnel) |
| Orodje se med delovanjem ustavi | Zaščita pred preobremenitvijo je aktivirana Disc jammed (anti-kickback activated) | Reduce pressure; allow tool to cool Release switch, clear obstruction, then restart |
| Prekomerne vibracije | Worn or damaged disc Nepravilno nameščen disk Ohlapen ročaj | Zamenjajte disk Re-mount disc correctly, ensure clamping nut is tight Tighten SoftVib handle |
| Reduced performance / Excessive sparking | Obrabljene ogljikove ščetke Dust buildup in vents | Have brushes inspected/replaced by service center Clean air vents thoroughly |
8. Specifikacije
| Značilno | Vrednost |
|---|---|
| Številka modela | 447668 |
| Vhodna moč | 1700 W |
| Izhodna moč | 1050 W |
| voltage | 230 V |
| Pogostost | 50/60 Hz |
| maks. Premer diska | 125 mm |
| Hitrost brez obremenitve | 2800-11500 obratov na minuto |
| Tool Holder (Angle Grinder) | M14 |
| Dolžina kabla | 4 m |
| Dimenzije (D x Š x V) | 340 x 77 x 105 mm |
| Teža | 2.6 kg |
| barva | Red, Black, Silver |
| Material | Kovina |
9. Garancija in podpora
Specific warranty details for this product may vary by region and retailer. Please refer to the warranty card included with your purchase or contact your point of sale for precise information.
Regarding spare parts availability, information is currently unavailable. For technical support, service, or inquiries about replacement parts, please contact Flex customer service or an authorized Flex service center in your region. Contact details can typically be found on the official Flex webspletnem mestu ali na embalaži vašega izdelka.
