Konec izdelkaview
The ANKO 200 Lumen COB Emergency LED Night Light is a versatile, cordless, and portable lighting solution designed for various applications. It features COB (Chip-on-Board) LED technology for bright, efficient illumination and offers multiple mounting options including magnetic attachment and adhesive stickers. This light is ideal for use in wardrobes, camping, kitchens, garages, attics, and for night reading, providing reliable light during power outages or in areas without direct power access.
Ključne značilnosti
- 200 Lumen COB LED: Provides bright and wide illumination.
- Brezžično in prenosno: Battery-operated for flexible placement and easy transport.
- Več možnosti namestitve: Includes strong magnets for metal surfaces and adhesive stickers for other flat surfaces.
- Preprosto delovanje stikala: Easy to turn on and off.
- Trajna zasnova: Primerno za različne notranje prostore.
Varnostne informacije
- Naprave ne izpostavljajte ekstremnim temperaturam ali neposredni sončni svetlobi.
- Naprave ne potapljajte v vodo ali druge tekočine.
- Uporabljajte samo predpisano vrsto baterije in med namestitvijo pazite na pravilno polarnost.
- Hraniti izven dosega otrok.
- Naprave ne poskušajte razstavljati ali spreminjati. S tem boste razveljavili garancijo.
- Če naprave ne boste uporabljali dlje časa, odstranite baterije, da preprečite puščanje.
Vsebina paketa
- 1 x ANKO 200 Lumen COB Emergency LED Night Light
- Adhesive Stickers (pre-attached or separate, depending on model variant)
- Uporabniški priročnik (ta dokument)
- Opomba: Baterije običajno niso priložene in jih je treba kupiti posebej.
Nastavitev
Namestitev baterije
- Locate the battery compartment cover on the back of the light.
- Potisnite ali odpnite pokrov, da odprete predal.
- Insert the required number of AAA batteries (typically 3x AAA, check device markings) according to the polarity indicators (+/-) inside the compartment.
- Trdno zaprite pokrov prostora za baterije.
Možnosti namestitve
The ANKO LED Night Light offers two primary mounting methods:
Magnetna montaža
- The light has built-in magnets on its back.
- Simply attach the light to any ferrous metal surface, such as a refrigerator, metal cabinet, or tool chest.
- Ensure the surface is clean and dry for optimal magnetic adhesion.
Adhesive Sticker Mounting
- If using the adhesive stickers, ensure the desired mounting surface is clean, dry, and smooth.
- Peel off the protective backing from the adhesive sticker(s) on the back of the light.
- Press the light firmly onto the chosen surface for at least 30 seconds.
- Allow the adhesive to set for a few hours (e.g., 24 hours) before applying significant pressure or repositioning.
Navodila za uporabo
Vklop/izklop
The ANKO LED Night Light is operated by a simple toggle switch, typically located on the side or front of the unit.
- Da prižgem luč ON, potisnite stikalo v položaj "VKLOP".
- Da prižgem luč IZKLOP, potisnite stikalo v položaj "IZKLOP".
Scenariji uporabe
- Wardrobes/Closets: Mount inside for easy visibility of clothes and items.
- Kitchen Cabinets: Provide extra light under cabinets or inside pantries.
- Garages/Attics: Illuminate dark corners or work areas where wired lighting is unavailable.
- Camping/Outdoor (sheltered): Use as a portable light source in tents or temporary shelters.
- Zasilna razsvetljava: Keep readily available for power outages.
- Night Reading: Attach to a headboard or nearby surface for focused light.
Vzdrževanje
Čiščenje
- Wipe the exterior of the light with a soft, dry cloth.
- Ne uporabljajte abrazivnih čistil, topil ali agresivnih kemikalij, saj lahko poškodujejo površino.
- Ensure the light is off and batteries are removed before cleaning.
Zamenjava baterije
When the light dims or stops functioning, it is time to replace the batteries.
- Ugasnite luč.
- Odprite predal za baterije, kot je opisano v poglavju »Namestitev baterij«.
- Odstranite stare baterije in jih zavrzite v skladu z lokalnimi predpisi.
- Insert new AAA batteries, ensuring correct polarity.
- Varno zaprite predal za baterije.
Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Luč se ne vklopi. | Baterije so prazne ali nepravilno nameščene. | Baterije zamenjajte z novimi in pri tem pazite na pravilno polarnost. |
| Svetloba je šibka. | Baterije so skoraj prazne. | Zamenjajte baterije. |
| Svetloba pada z montažne površine. | Surface is not clean, smooth, or suitable for adhesive/magnet. | Clean the surface thoroughly. For adhesive, ensure it's smooth and allow setting time. For magnetic, ensure it's a strong ferrous metal. |
| Switch feels loose or unresponsive. | Težava z notranjim mehanizmom. | Contact customer support. Do not attempt to repair. |
Specifikacije
| Funkcija | Podrobnost |
|---|---|
| Model | B079MDCYM7 |
| Vir svetlobe | COB LED |
| Lumnski izhod | 200 lumnov |
| Vir napajanja | Battery (e.g., 3x AAA, not included) |
| Možnosti namestitve | Magnetic, Adhesive Sticker |
| Dimenzije | (Specific dimensions not provided in input, placeholder) |
| Teža | (Specific weight not provided in input, placeholder) |
Garancija in podpora
ANKO products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your purchase or visit the official ANKO webspletno mesto. Shranite račun kot dokazilo o nakupu.
If you encounter any issues or have questions regarding your ANKO LED Night Light, please contact our customer support team:
- E-pošta: support@anko.com (Nprample email, actual contact info may vary)
- telefon: 1-800-XXX-XXXX (Nprample phone, actual contact info may vary)
- Webspletno mesto: www.anko.com (Nprample website, actual contact info may vary)
Please have your model number (B079MDCYM7) and purchase date ready when contacting support.
Pomembne opombe o medijih
Slike izdelkov: No useful product images were provided in the source data. The image link provided was a "No image available" placeholder. Therefore, no product images could be embedded in this manual.
Video posnetki izdelkov: No official product videos from the seller were found in the provided data. Therefore, no videos could be embedded in this manual.
