OHLINS HD-751

Ohlins STX 36 Blackline Twin Shock Instruction Manual

Model: HD-751 | Brand: OHLINS

1. Uvod

This manual provides essential information for the installation, operation, and maintenance of your Ohlins STX 36 Blackline Twin Shock Absorbers, model HD-751. These high-performance shock absorbers are designed to enhance the ride quality and handling of compatible Harley-Davidson Sportster models. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Združljivost izdelkov

The Ohlins STX 36 Blackline Twin Shock HD-751 is suitable for the following Harley-Davidson Sportster models:

3. Product Features and Technical Data

The Ohlins STX 36 Blackline Twin Shock HD-751 is a high-quality suspension component designed for optimal performance. Key features and technical specifications are detailed below:

Pair of Ohlins STX 36 Blackline Twin Shock Absorbers

Figure 3.1: A pair of Ohlins STX 36 Blackline Twin Shock Absorbers, showcasing their black finish and coil-over design. These are the primary components for rear suspension.

Tehnični podatki:

SpecifikacijaVrednost
Dolžina296 mm
Dolžina udarca59 mm
Spring Rate (N/mm)19 N/mm
PoložajZadaj
Assembled Spring00281-72
Pakirna enotaPar
Close-up of Ohlins shock absorber showing the brand logo

Slika 3.2: Podroben view of the Ohlins shock absorber, highlighting the precision engineering and the distinct Ohlins branding on the component.

4. Nastavitev in namestitev

Proper installation is crucial for the performance and safety of your Ohlins shock absorbers. It is highly recommended that installation be performed by a qualified motorcycle technician. Incorrect installation can lead to damage to the product or the motorcycle, and may compromise rider safety.

Splošna navodila za namestitev:

  1. Priprava: Ensure the motorcycle is securely supported on a stand, with the rear wheel off the ground.
  2. Removal of Old Shocks: Carefully remove the existing rear shock absorbers, noting the orientation and any spacers.
  3. Installation of New Shocks: Install the Ohlins STX 36 Blackline Twin Shocks. Ensure all mounting bolts are torqued to the motorcycle manufacturer's specifications. Do not overtighten.
  4. Preverjanje dovoljenja: Verify that there is adequate clearance around the shock absorbers throughout the full range of suspension travel.
  5. Začetna prilagoditev: While these shocks come pre-set, minor adjustments may be necessary based on rider weight and riding style. Refer to the motorcycle's service manual for general suspension setup principles.

Note: Specific torque values and detailed installation steps for your motorcycle model should be obtained from the official Harley-Davidson service manual.

Ohlins STX 36 Blackline Twin Shock Absorbers from a different angle

Figure 4.1: Another perspective of the Ohlins STX 36 Blackline Twin Shock Absorbers, illustrating their compact design and robust construction, ready for installation.

5. Načela delovanja

The Ohlins STX 36 Blackline Twin Shocks are designed to provide superior damping and control. As monotube high-pressure gas type shock absorbers, they utilize an internal container within the main body to separate the oil from the gas, preventing cavitation and ensuring consistent damping performance under various conditions.

The 36mm piston diameter contributes to effective oil displacement, allowing for precise control over compression and rebound damping. The pre-set spring rate of 19 N/mm is optimized for the specified Harley-Davidson Sportster models, offering a balanced ride for typical use.

While these shocks are designed for performance, it is important to ride responsibly and within the limits of your motorcycle and riding conditions. Always wear appropriate safety gear.

6. Vzdrževanje

Regular maintenance extends the lifespan and ensures the optimal performance of your Ohlins shock absorbers. While Ohlins products are built for durability, periodic checks are recommended.

Priporočeni vzdrževalni postopki:

7. Odpravljanje težav

This section addresses common issues that may arise with shock absorbers. For complex problems, professional assistance is advised.

TežavaMožen vzrokrešitev
Excessive Bounciness / Poor DampingWorn internal components, low gas pressure, incorrect spring rate for load.Inspect for leaks. If no leaks, professional service may be required to check internal components and gas pressure. Ensure correct spring for application.
Harsh Ride / Lack of ComplianceIncorrect spring rate (too stiff), binding in suspension linkage (if applicable).Verify spring rate is appropriate for rider/load. Check motorcycle's swingarm pivot and linkage for free movement.
Uhajanje oljaDamaged oil seal.Contact an authorized Ohlins service center for seal replacement. Do not ride with leaking shocks.
Unusual Noises (e.g., clunking)Loose mounting bolts, worn bushings, internal damage.Check all mounting bolts for proper torque. Inspect bushings for wear. If noises persist, seek professional inspection.

8. Specifikacije

Detailed specifications for the Ohlins STX 36 Blackline Twin Shock HD-751:

9. Garancija in podpora

Ohlins products are manufactured to high standards of quality and performance. For specific warranty information, please refer to the warranty documentation provided with your purchase or visit the official Ohlins webspletnega mesta. Shranite dokazilo o nakupu za morebitne garancijske zahtevke.

For technical support, service, or genuine Ohlins spare parts, please contact an authorized Ohlins dealer or service center. Using non-genuine parts may void your warranty and compromise performance and safety.

Več informacij in podpornih virov najdete na uradni spletni strani Ohlins webmesto.

Povezani dokumenti - HD-751

Prejview Navodila za montažo amortizerja Öhlins HD 778 za Harley Davidson Touring
Detailed mounting instructions and setup data for the Öhlins HD 778 shock absorber, designed for Harley Davidson Touring motorcycles. Includes kit contents, step-by-step installation guide, and technical specifications.
Prejview Navodila za montažo amortizerja Öhlins HD 779 za Harley Davidson Touring
Zagotavlja obsežna navodila za montažo amortizerja Öhlins HD 779, posebej zasnovanega za motorna kolesa Harley Davidson Touring. Ta priročnik podrobno opisuje vsebino kompleta, varnostna opozorila in postopke montaže po korakih.
Prejview Navodila za montažo amortizerja Öhlins HD 516 za Harley Davidson Softail
Podrobna navodila za montažo in podatki o nastavitvi amortizerja Öhlins HD 516, zasnovanega za motorna kolesa Harley Davidson Softail. Vključuje vsebino kompleta, opozorila in tehnične specifikacije.
Prejview Navodila za montažo amortizerja Öhlins HD 513 za Harley Davidson Softail
Detailed mounting instructions for the Öhlins HD 513 shock absorber for Harley Davidson Softail motorcycles. Includes kit contents, warnings, step-by-step installation guide, and setup data.
Prejview Vodnik za montažo in nastavitev amortizerja Öhlins DU 126 za Ducati Monster
Uradna navodila za montažo in nastavitev amortizerja Öhlins DU 126, zasnovanega za motorna kolesa Ducati Monster. Vključuje vsebino kompleta, korake za montažo, podatke o nastavitvi in ​​pomembna opozorila.
Prejview Navodila za montažo amortizerja Öhlins HD 515 za Harley Davidson Softail
Detailed mounting instructions for the Öhlins HD 515 shock absorber, designed for Harley Davidson Softail models. Includes kit contents, warnings, step-by-step installation guide, and setup data.